This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ] Export date:Sun Feb 23 17:00:06 2025 / +0000 GMT ___________________________________________________ Title: Get The Important Preparation Guide With 156-315.80 Dumps [Q196-Q217] --------------------------------------------------- Get The Important Preparation Guide With 156-315.80 Dumps Get Totally Free Updates on 156-315.80 Dumps PDF Questions NO.196 Which Remote Access Client does not provide an Office-Mode Address?  SecuRemote  Endpoint Security Suite  Endpoint Security VPN  Check Point Mobile NO.197 SSL Network Extender (SNX) is a thin SSL VPN on-demand client that is installed on the remote user’s machine via the web browser. What are the two modes of SNX?  Application and Client Service  Network and Application  Network and Layers  Virtual Adapter and Mobile App Explanation/Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk67820NO.198 Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new CPU to replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?  Go to clash-Run cpstop | Run cpstart  Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security Gateway  Administrator does not need to perform any task. Check Point will make use of the newly installed CPU and Cores  Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security Gateway | Install Security Policy NO.199 SSL Network Extender (SNX) is a thin SSL VPN on-demand client that is installed on the remote user’s machine via the web browser. What are the two modes of SNX?  Application and Client service  Network and Application  Network and Layers  Virtual Adapter and Mobile App ExplanationSSL Network Extender (SNX) is a thin SSL VPN on-demand client installed automatically on the user’s machine via a web browser. It supplies access to all types of corporate resources. SSL Network Extender (SNX) has two modes:*Network Mode: Users can access all application types (Native-IP-based and Web-based) in the internal network. To install the Network Mode client, users must have administrator privileges on the client computer.*Application Mode: Users can access most application types (Native-IP-based and Web-based) in the internal network, including most TCP applications. The user does not require administrator privileges on the endpoint machine.NO.200 Which process handles connection from SmartConsole R80?  fwd  cpmd  cpm  cpd NO.201 You noticed that CPU cores on the Security Gateway are usually 100% utilized and many packets were dropped. You don’t have a budget to perform a hardware upgrade at this time. To optimize drops you decide to use Priorities Queues and fully enable Dynamic Dispatcher. How can you enable them?  fw ctl multik dynamic_dispatching on  fw ctl multik dynamic_dispatching set_mode 9  fw ctl multik set_mode 9  fw ctl multik pq enable Reference:https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk105261NO.202 Which of the following is NOT a valid type SecureXL template?  Accept Template  Deny template  Drop Template  NAT Template NO.203 What is the recommended number of physical network interfaces in a Mobile Access cluster deployment?  4 Interfaces – an interface leading to the organization, a second interface leading to the internet, a third interface for synchronization, a fourth interface leading to the Security Management Server.  3 Interfaces – an interface leading to the organization, a second interface leading to the Internet, a third interface for synchronization.  1 Interface – an interface leading to the organization and the Internet, and configure for synchronization.  2 Interfaces – a data interface leading to the organization and the Internet, a second interface for synchronization. Explanation/Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_Mobile_Access_WebAdmin/41723.htmNO.204 Which is NOT an example of a Check Point API?  Gateway API  Management API  OPSC SDK  Threat Prevention API Explanation/Reference:Reference: https://sc1.checkpoint.com/documents/R80/APIs/#introduction%20NO.205 Which statement is not TRUE about Default synchronization?  Using UDP Multicast Broadcast on port 8161  Using UDP Multicast on port 8116  Quicker than Full sync  Transfer changes in the kernel tables between cluster members NO.206 What kind of information would you expect to see using the sim affinity command?  The VMACs used in a Security Gateway cluster  The involved firewall kernel modules in inbound and outbound packet chain  Overview over SecureXL templated connections  Network interfaces and core distribution used for CoreXL NO.207 Which is the least ideal Synchronization Status for Security Management Server High Availability deployment?  Synchronized  Never been synchronized  Lagging  Collision Explanation/Reference:Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?topic=documents/R80/CP_R80_SecMGMT/120712NO.208 What SmartEvent component creates events?  Consolidation Policy  Correlation Unit  SmartEvent Policy  SmartEvent GUI NO.209 What is the command to check the status of the SmartEvent Correlation Unit?  fw ctl get int cpsead_stat  cpstat cpsead  fw ctl stat cpsemd  cp_conf get_stat cpsemd Explanation/Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk113265NO.210 For Management High Availability, which of the following is NOT a valid synchronization status?  Collision  Down  Lagging  Never been synchronized References:NO.211 Fill in the blank: The R80 utilityfw monitoris used to troubleshoot ________.  User data base corruption  LDAP conflicts  Traffic issues  Phase two key negotiations Check Point’s FW Monitor is a powerful built-in tool for capturing network traffic at the packet level. The FW Monitor utility captures network packets at multiple capture points along the FireWall inspection chains. These captured packets can be inspected later using the WireShark Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk30583NO.212 During Inspection of your Threat Prevention logs you find four different computers having one event each with a critical Severity. Which of those host should you try to remediate first?  Host having critical event found by Threat Emulation IS.  Host having critical event found by IPS  Host having critical event found by Antivirus  Host having critical event found by Anti-Bot NO.213 An administrator is creating an IPsec site-to-site VPN between his corporate office and branch office. Both offices are protected by Check Point Security Gateway managed by the same Security Management Server. While configuring the VPN community to specify the pre-shared secret the administrator found that the check box to enable pre-shared secret and cannot be enabled.Why does it not allow him to specify the pre-shared secret?  IPsec VPN blade should be enabled on both Security Gateway.  Pre-shared can only be used while creating a VPN between a third party vendor and Check Point Security Gateway.  Certificate based Authentication is the only authentication method available between two Security Gateway managed by the same SMS.  The Security Gateways are pre-R75.40. NO.214 When SecureXL is enabled, all packets should be accelerated, except packets that match the following conditions:  All UDP packets  All IPv6 Traffic  All packets that match a rule whose source or destination is the Outside Corporate Network  CIFS packets NO.215 Which is NOT an example of a Check Point API?  Gateway API  Management API  OPSC SDK  Threat Prevention API References:NO.216 What will SmartEvent automatically define as events?  Firewall  VPN  IPS  HTTPS NO.217 To ensure that VMAC mode is enabled, which CLI command should you run on all cluster members?  fw ctl set int fwha vmac global param enabled  fw ctl get int vmac global param enabled; result of command should return value 1  cphaprob-a if  fw ctl get int fwha_vmac_global_param_enabled; result of command should return value 1 Explanation/Reference:Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_ClusterXL_AdminGuide/7292.htm Loading … Prepare With Top Rated High-quality 156-315.80 Dumps For Success in Exam: https://www.topexamcollection.com/156-315.80-vce-collection.html --------------------------------------------------- Images: https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-10-20 15:51:51 Post date GMT: 2022-10-20 15:51:51 Post modified date: 2022-10-20 15:51:51 Post modified date GMT: 2022-10-20 15:51:51