This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ] Export date:Wed Apr 2 8:43:14 2025 / +0000 GMT ___________________________________________________ Title: The Best Practice Test Preparation for the 301a Certification Exam [Q50-Q69] --------------------------------------------------- The Best Practice Test Preparation for the 301a Certification Exam 301a Exam Dumps, Practice Test Questions BUNDLE PACK How to book the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Register or log in on F5 Network website, or visit the Candidate Portal, or contact F5 Certification for more information.   Q50. The network team has recently added a new syslog server with IP address 10.1.1.1.Which command adds the new syslog entry on the F5 LTM device?A)B)C)D)  Option A  Option B  Option C  Option D Q51. An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?  Provision AVR to Minimum. Provision LTM at Maximum  Provision AVR to none. Provision LTM to Dedicated  Provision AVR to Minimum, Provision LTM to Dedicated  Provision LTM to Dedicated, Provision AVR to Dedicated Q52. Six servers have a varying number of connections that change based on the user load.Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?  Least Sessions  Least Connections  Predictive  Ratio Q53. Exhibit.An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site. The VS HTTP passes the client requests to the webservers. The webservers query the database servers through the VS_DB. Initially, the LTM Specialist finds the database servers directly return the packets to the webservers.which setting must be enabled for the configuration to function correctly?  VS_HTTP snat auto map  VS.HTTP auto last hop  VS DB auto last hop  VS_DB snat auto map Q54. An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:The application servers do NOT Support SSL, but client access to the application should be secured.Multiple requests from the same client should be sent to the same pool member.All pool members will have roughly the same processing power, and traffic should be distributed evenly.The LTM device is NOT the pool members’ default gateway.which configuration should the LTM Specialist.  a performance 14 virtual server with a SNAT and cookie persistence  a performance L4 virtual server with a Client SSL profile and Source Address persistence  A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and cookie persistence  A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie persistence  A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance. Q55. An LTM Specialist is configuring a new virtual server on an LTM device and assigning a SNAT pool that is already is use another virtual server. Both virtual servers use the same pool members to load balance traffic. A maximum of 35,000 users needs to be able to access each virtual server ta any time. The network architecture does NOT allow the backend servers to use the LTM device as a default gateway.What is the minimum number of SNAT addresses required in the SNAT pool to meet the needs of the virtual servers?  2  3  4  1 Both vs share the same snat pool, and both use the same pool member. Then the concurrent number of snatpool will be added. For each VS, there is a maximum of 35,000 users, and those two VSs have a maximum of 70,000 users. The stem did not mention how many connections each user would have concurrently. Calculated with a minimum of 1 connection, then 70,000 connections would be concurrent. One IP can support 65,535 connection. Therefore, at least 2 or more snaptips are requiredQ56. An LTM Specialist has detected that a brute force login attack is occurring against the SSH service via a BIG-IP management interface. Login attempts are occurring from many IPs within the internal company network. BIG-IP SSH access restrictions are in place as follows:The LTM Specialist has determined that SSH access should only occur from the 192.168.1.0/24 and 172.16.254.0/23 networks.Which tmsh command should the LTM Specialist use to permit access from the desired networks only?  modify.sys sshd allow add {”192.168. 10/24 , ” ”172. 16 2540/23”)  modify /sys sshd login disable (”10.0.00/8”, ”172 16.0 0/12”, ”192. 168.0.0/16”)  modify/sys allow replace-all-with {”192.168.1.00/24”, ”192.16.254.0/23”}  modify/sys sshd login enable {”192.166.10/24”” ”172.16 254 0/23 Select C to overwrite the existing network’s allow configuration over the specified network segment.Q57. An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.Which F5 feature will provide this?  the Performance panel  the AVR module  the Dashboard  the Statistics panel Q58. A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:Which action should be taken to correct this issue?  create a new virtual server with the service port of 53 and the protocol set to TC  change the profile set on the virtual server To TCP/UDP  change the profile set on the virtual server to TCP  add a TCP prone to the existing virtual server. Q59. One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.Which configuration item enables this behavior?  iRule  Gateway Fail Safe  Gateway pool monitor  Gateway pool Q60. in which Application Visibility and Reporting (AYR) profile must the SMTP profile be defined to configure notifications via email?  App analytics profile  virtual server profile  custom analytics profile  default analytics profile Q61. A Web Server Administrator uses a manual process to display a page when the service is down.Which feature on the LTM device should be used to automate the service down page? :  Enable Request Queueing  Action on Service Down  Redirect Rewrite  Fallback Host Q62. An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)  configure a serial failover cable for mirror traffic  configure a OneConnect profile to mirror connections  configure a VLAN and primary mirroring address for mirror traffic  enable Mirroring for a virtual server and persistence profile  enable Clone Pools for a virtual server and a persistence profile Q63. An LTM Specialist needs to create two virtual servers.The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.What must be selected in the Source Address Affinity persistence profile?  Match across Virtual Servers  Match across Pool Members  Match across Services  Match across Polls Q64. An application is being load balanced through the LTM device using the configuration displayed below.The network has been re-engineered to NAT all client connection. As a result, all client connections are hitting the same pool member.Which changes should the LTM Specialist make in order to restore load balancing functionality wile maintaining session persistence?  Change the virtual server type to Standard, add an http profile, and change the persistence profile to Destination Address  Leave the virtual server type set Performance (Layer 4) and change the persistence type to hash  Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to hash source Address  Change the virtual server to Standard add an http profile, and change the persistence profile to Cookie persistence Q65. An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:What does the LTM Specialist need to change in the configuration to avoid this issue?  snatpool  persistence mirroring  connection mirroring  ftp profile The stem mentions that it is a single server node, so there is no need to consider the factors of session maintenance. The actual requirement is to maintain the original connection status during failover. You need to configure connection mirroring to synchronize the connection status between the devices in the cluster in real time.Q66. A pool has four members. Ail of the servers have been designed and configured with the same application. Each client’s request can significantly the performance of the servers.Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?  Least Connections  Priority Group  Ratio  Observed Q67. A web server’s default gateway is the network router. The LTM Specialist needs to introduce an LTM device to load balance to the web servers without changing the server’s default gateway.Which deployment method and settings should the LTM Specialist use to ensure correct traffic flow and that the web servers can obtain the actual con IP addresses?  route deployment with Automap configured and X-Forwarded-For inserted in HTTP headers  route deployment without SNAT configuration  SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP headers  SNAT deployment with automap configured Q68. An LTM device is configure with the wildcard virtual servers displayed below.A client connection is made to 172.24.31.14:443.  VS_172_24_1_WILDCARD  VS_HTTP_WILDCARD  VS_172_24_WILDCARD  VS_HTTPS_WILDCARD Match the network segment first and then port.Q69. An LTM Specialist needs to provide access to a 8BG-IP to device for a company’s support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company’s Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?  configure remote authentication for all users with a default user role of Guest  configure remote authentication and map support personnel users to the Guest user role  configure remote authentication and map support personnel users to the Operator user role  configure remote authentication for all users with a default user role of Operator  Loading … Prepare for the Actual LTM Specialist 301a Exam Practice Materials Collection: https://www.topexamcollection.com/301a-vce-collection.html --------------------------------------------------- Images: https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-11-02 16:28:00 Post date GMT: 2022-11-02 16:28:00 Post modified date: 2022-11-02 16:28:00 Post modified date GMT: 2022-11-02 16:28:00