This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ] Export date:Mon Jan 20 11:19:38 2025 / +0000 GMT ___________________________________________________ Title: NEW 2022 Certification Sample Questions NSE6_FWF-6.4 Dumps & Practice Exam [Q17-Q39] --------------------------------------------------- NEW 2022 Certification Sample Questions NSE6_FWF-6.4 Dumps & Practice Exam NSE6_FWF-6.4 Deluxe Study Guide with Online Test Engine NEW QUESTION 17Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?  SQL services must be running  Two wireless APs must be sending data  DTLS encryption on wireless traffic must be turned off  Wireless network security must be set to open NEW QUESTION 18Which statement describes FortiPresence location map functionality?  Provides real-time insight into user movements  Provides real-time insight into user online activity  Provides real-time insight into user purchase activity  Provides real-time insight into user usage stats NEW QUESTION 19Refer to the exhibits.Exhibit AExhibit BA wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.Which two configuration changes will resolve the issue? (Choose two.)  For both interfaces in the wtp-profile, configure set vaps to be “Authors”  Disable intra-vap-privacy for the Authors vap-wireless network  For both interfaces in the wtp-profile, configure vap-all to be manual  Increase the transmission power of the AP radio interfaces NEW QUESTION 20Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?  Security Fabric  SSH  HTTPS  FortiTelemetry NEW QUESTION 21Refer to the exhibit.What does the asterisk (*) symbol beside the channel mean?  Indicates channels that can be used only when Radio Resource Provisioning is enabled  Indicates channels that cannot be used because of regulatory channel restrictions  Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)  Indicates channels that are subject to dynamic frequency selection (DFS) regulations NEW QUESTION 22Which two statements about background rogue scanning are correct? (Choose two.)  A dedicated radio configured for background scanning can support the connection of wireless clients  When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP  Background rogue scanning requires DARRP to be enabled on the AP instance  A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band NEW QUESTION 23Refer to the exhibits.Exhibit AExhibit BExhibit CA wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?  Increase the transmission power of the AP radios  Enable frequency handoff on the AP to band steer clients  Reduce the number of wireless networks being broadcast by the AP  Install another AP in the reception area to improve available bandwidth NEW QUESTION 24When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)  81 Tunnel-Private-Group-ID  65 Tunnel-Medium-Type  83 Tunnel-Preference  58 Egress-VLAN-Name  64 Tunnel-Type The RADIUS user attributes used for the VLAN ID assignment are:IETF 64 (Tunnel Type)-Set this to VLAN.IETF 65 (Tunnel Medium Type)-Set this to 802IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.NEW QUESTION 25Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)  DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.  DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.  DARRP measurements can be scheduled to occur at specific times.  DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices. According to Fortinet training: “When using DARRP, the AP selects the best channel available to use based on the scan results of BSSID/receive signal strength (RSSI) to AC” and “To set the running time for DARRP optimization, use the following CLI command within the wireless controller setting: set darrp-optimize {integer}. Note that DARRP doesn’t do continuous spectrum analysis…”NEW QUESTION 26Which factor is the best indicator of wireless client connection quality?  Downstream link rate, the connection rate for the AP to the client  The receive signal strength (RSS) of the client at the AP  Upstream link rate, the connection rate for the client to the AP  The channel utilization of the channel the client is using NEW QUESTION 27Which statement describes FortiPresence location map functionality?  Provides real-time insight into user movements  Provides real-time insight into user online activity  Provides real-time insight into user purchase activity  Provides real-time insight into user usage stats This geographical data analysis provides real-time insights into user behavior.NEW QUESTION 28Refer to the exhibits.Exhibit AExhibit BA wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.Which two configuration changes will resolve the issue? (Choose two.)  For both interfaces in the wtp-profile, configure set vaps to be “Authors”  Disable intra-vap-privacy for the Authors vap-wireless network  For both interfaces in the wtp-profile, configure vap-all to be manual  Increase the transmission power of the AP radio interfaces NEW QUESTION 29Refer to the exhibits.Exhibit AExhibit BThe exhibits show the diagnose debug log of a station connection taken on the controller CLI.Which security mode is used by the wireless connection?  WPA2 Enterprise  WPA3 Enterprise  WPA2 Personal and radius MAC filtering  Open, with radius MAC filtering NEW QUESTION 30Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)  Gathering details about on site visitors  Predicting the number of guest users visiting on-site  Comparing current data with historical records  Reporting potential threats by guests on site NEW QUESTION 31How are wireless clients assigned to a dynamic VLAN configured for hash mode?  Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN  Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs  Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool  Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.NEW QUESTION 32Which factor is the best indicator of wireless client connection quality?  Downstream link rate, the connection rate for the AP to the client  The receive signal strength (RSS) of the client at the AP  Upstream link rate, the connection rate for the client to the AP  The channel utilization of the channel the client is using SSI, or “Received Signal Strength Indicator,” is a measurement of how well your device can hear a signal from an access point or router. It’s a value that is useful for determining if you have enough signal to get a good wireless connection.NEW QUESTION 33Refer to the exhibit.If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?  Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility  Areas with the signal strength weaker than -68 dB are cut out of the map  Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor  Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs. NEW QUESTION 34As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?  Create wireless LAN specific policies  Preauthorize APs  Create a custom AP profile  Set the wireless controller country setting NEW QUESTION 35You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.Which configuration change will allow neighboring APs to be successfully detected?  Enable Locate WiFi clients when not connected in the relevant AP profiles.  Enable Monitor channel utilization on the relevant AP profiles.  Ensure that all allowed channels are enabled for the AP radios.  Enable Radio resource provisioning on the relevant AP profiles. The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection. Loading … NSE6_FWF-6.4 dumps review - Professional Quiz Study Materials: https://www.topexamcollection.com/NSE6_FWF-6.4-vce-collection.html --------------------------------------------------- Images: https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-12-25 13:41:48 Post date GMT: 2022-12-25 13:41:48 Post modified date: 2022-12-25 13:41:48 Post modified date GMT: 2022-12-25 13:41:48