This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ] Export date:Wed Apr 2 8:47:35 2025 / +0000 GMT ___________________________________________________ Title: 2023 Updated Verified JN0-349 dumps Q&As - 100% Pass Guaranteed [Q50-Q64] --------------------------------------------------- 2023 Updated Verified JN0-349 dumps Q&As - 100% Pass Guaranteed Provide Valid Dumps To Help You Prepare For Enterprise Routing and Switching, Specialist (JNCIS-ENT) Exam QUESTION 50You are deploying a new switch configuration at a small branch using EX3400 Series switches. You are concerned about loop prevention.In this scenario, which configuration would you deploy?  RSTP  EVPN  MPLS  BPDU QUESTION 51Exhibit.Which statement is true about the configuration shown in the exhibit?  Both the add-community and local-pref import policies will be evaluated routes are learned from neighbor 172.30.2.1.  Only the local -pref import will be evaluated when routes are learned neighbor 172.301.1.  No import policy will be evaluated when routes are learned from neighbor 172.30.2.1.  Only the add-community import policy will be evaluated routers are learned neighbor 172.30.1.1. QUESTION 52Click the Exhibit button.Referring to the exhibit, the local router should have an IS-IS adjacency with a neighboring router, but the adjacency never establishes correctly.What should you do to solve the problem?  Disable level 2 for the interfaces.  Disable level 1 for the interfaces.  Disable wide metrics.  Change the local IS-IS area ID to 49.0002. QUESTION 53You must implement filter-based forwarding. You need to direct traffic from 192.168.1.0/24through vr1 and traffic from 10.210.0.128/26 through vr2.Which configuration is correct in this scenario?  firewall {family inet {filter fbf-filter1 {term match-192-subnet {from {source-address {192.168.1.0/26;}}then {routing-instance vr2;}}term match-10-subnet {from {source-address {10.210.0.128/26;}}then {routing-instance vr1;}}}}}  firewall {family inet {filter fbf-filter1 {term match-192-subnet {from {source-address {192.168.0.0/24;}}then {routing-instance vr1;}}term match-10-subnet {from {source-address {10.210.0.128/27;}}then {routing-instance vr2;}}}}}  firewall {family inet {filter fbf-filter1 {term match-192-subnet {from {source-address {192.168.2.0/26;}}then {routing-instance vr2;}}term match-10-subnet {from {source-address {10.210.1.128/26;}}then {routing-instance vr1;}}}}}  firewall {family inet {filter fbf-filter1 {term match-192-subnet {from {source-address {192.168.1.0/24;}}then {routing-instance vr1;}}term match-10-subnet {from {source-address {10.210.0.128/26;}}then {routing-instance vr2;}}}}} QUESTION 54Which three statements describe what happens when processing a frame for a switched packet? (Choose three.)  The ingress PFE performs the MAC address lookup.  The frame enters the ingress port and is forwarded out all ports.  The frame enters the ingress port and is processed by the ingress PFE.  The ingress PFE sends the header information to the Routing Engine.  The egress PFE forwards the packet out the egress port towards the destination. QUESTION 55Which two situations would cause dynamic ARP inspection to drop traffic? (Choose two.)  if no IP-to-MAC address entry exists in the DHCP snooping database  if the IP address in the ARP packet is deemed invalid  if the requested MAC address exceeds the configured limit on the port  if the ARP packet comes from a port that has been configured as trusted QUESTION 56What are two characteristics of IS-IS CSNPs? (Choose two.)  IS-IS CSNPs contain header information for all link-state PDUs.  IS-IS CSNPs are used to request a copy of a missing link state PDU.  IS-IS CSNPs are used to maintain the link-state database synchronization.  IS-IS CSNPs contain header information for specific requested link-state PDUs. QUESTION 57Your network is configured with dynamic ARP inspection (DAI) using the default parameters for all the DHCP and ARP related configurations. You just added a new device connected to a trunk port and configured it to obtain an IP address using DHCP.Which two statements are correct in this scenario? (Choose two.)  The DHCP server assigns the IP addressing information to the new device.  DAI validates the ARP packets for the new device against the DHCP snooping database.  The ARP request and response packets for the new device will bypass DAI.  DHCP snooping adds the DHCP assigned IP address for the new device to its database. QUESTION 58You want to use filter-based forwarding (FBF) to forward traffic sourced from subnet 10.0.0.0/24 to a specific destination.Which two routing instance types would enable you to accomplish this task? (Choose two.)  virtual routing and forwarding  virtual router  forwarding  virtual switch Explanationhttps://www.juniper.net/documentation/en_US/junos/topics/example/firewall-filter-option-filter-based-forwardinQUESTION 59On EX Series devices, what are two software features that accommodate redundancy? (Choose two.)  OAM  NSR  IGMP  GRES QUESTION 60Which OSPF area type receives only the default route from the backbone?  transmit area  totally stubby area  not so stubby area  stub area QUESTION 61What are three reasons a router would send out an IS-IS link-state PDU? (Choose three.)  A new external route is imported from BGP.  The router’s link to a neighbor goes down.  A new neighbor exists on the link.  The cost of a link to an existing neighbor has changed.  IS-IS sends link-state PDUs at random intervals. QUESTION 62Which two statements about aggregate routes in the Junos OS are correct? (Choose two.)  An aggregate route has a default next hop of an IP address.  An aggregate route always shows as active in the routing table.  An active route can contribute only to a single aggregate route.  Only one aggregate route can be configured for each destination prefix. QUESTION 63Click the Exhibit button.Based on the traceoptions output shown in the exhibit, what is the problem with the adjacency?  connectivity  authentication mismatch  MTU mismatch  area mismatch QUESTION 64Click the Exhibit button.A recent security audit indicates that peer-to-peer applications are allowed on the guest VLAN and employees may have been using the guest VLAN for this purpose. You deploy the configuration shown in the exhibit, but it does not stop the peer-to-peer traffic.In this scenario, what must you do to implement the security policy?  Implement 802.1X on the guest VLAN  Attach the filter to the VLAN  Deploy storm control to block unknown unicast traffic  Use persistent MAC learning  Loading … Juniper JN0-349 Exam Topics: SectionObjectivesProtocol Independent RoutingIdentify the concepts, operation or functionality of various protocol-independent routing componentsStatic, aggregate, and generated routesMartian addressesRouting instances, including RIB groupsLoad balancingFilter-based forwarding Demonstrate knowledge how to configure, monitor, or troubleshoot various protocol-independent routing componentsStatic, aggregate, and generated routesLoad balancingFilter-based forwardingTunnelsIdentify the concepts, requirements or functionality of IP tunnelingTunneling applications and considerationsGREIP-IP Demonstrate knowledge of how to configure, monitor or troubleshoot IP tunnelsGREIP-IPTroubleshooting tools (e.g., ping, traceroute, trace options, show commands, logging)BGPDescribe the concepts, operation or functionality of BGPBGP basic operationBGP message typesAttributesRoute/path selection processIBGP and EBGP functionality and interaction Demonstrate knowledge of how to configure, monitor, or troubleshoot BGPGroups and peersAdditional basic optionsRouting policy applicationTroubleshooting tools (e.g., ping, traceroute, trace options, show commands, logging)IS-ISDescribe the concepts, operation or functionality of IS-ISLink-state databaseIS-IS PDUsTLVsAdjacencies and neighborsLevels and areasDesignated intermediate system (DIS)Metrics Demonstrate knowledge of how to configure, monitor or troubleshoot IS-ISLevels, interfaces and adjacenciesAdditional basic optionsRouting policy applicationTroubleshooting tools (e.g., ping, traceroute, trace options, show commands, logging)   Achieve Success in Actual JN0-349 Exam JN0-349 Exam Dumps: https://www.topexamcollection.com/JN0-349-vce-collection.html --------------------------------------------------- Images: https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-02-16 12:27:33 Post date GMT: 2023-02-16 12:27:33 Post modified date: 2023-02-16 12:27:33 Post modified date GMT: 2023-02-16 12:27:33