This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ] Export date:Sat Feb 22 15:56:04 2025 / +0000 GMT ___________________________________________________ Title: Free JNCIS-MistAI JN0-250 Ultimate Study Guide (Updated 66 Questions) [Q32-Q47] --------------------------------------------------- Free JNCIS-MistAI JN0-250 Ultimate Study Guide (Updated 66 Questions) Get to the Top with JN0-250 Practice Exam Questions Advantages of getting the Juniper JN0-250 Certification: You can enjoy the following benefits after getting the Juniper JNO0-250 certification utilizing JN0-250 exam dumps: Increase in wageMore job opportunitiesEnhanced chances of finding employment   NO.32 Referring to the exhibit, what do you determine about the site’s Time to Connect SLE metric?  Successful connect averaged 1.6 seconds.  Eighty percent of the Time to Connect failures are related to DHCP failures  All clients cannot connect to the Internet.  Time to Connect Association DHCP failures impacted 80% of users. NO.33 Which Juniper Mist device enables seamless roaming for large campus networks through on-premises tunneling?  Mist BT11  Mist AP43  Mist AP33  Mist Edge NO.34 Which 802.11 amendment added OFDMA?  802.11b  802.11n  802.11ax  802.11ac NO.35 What happens if your Juniper Mist subscriptions expire?  Devices are bricked.  Access to the Ul will be shut off.  Devices remain operational but cannot make any further configuration changes.  Devices will be randomly turned off and on. NO.36 You configured an 802.11n AP to use the 2.4 GHz frequency band and 20 MHz channel width.In this scenario, how many non-overlapping channels are available for clients to use in Europe?  11  4  1  6 NO.37 When would be the earliest opportunity to configure an access point (AP)?  after you are on the same network as the AP  after the AP is installed  after the AP is online  after the AP is claimed to inventory NO.38 What is an 802.11 management frame transmitted by an AP?  echo request  ping  keepalive  beacon NO.39 A Mist access point is booting up, and will soon receive a channel assignment from the Mist Cloud. The channel assigned by the cloud is a DFS channel.In this scenario, what must the AP do before broadcasting an SSID on the channel?  Validate client device support.  Listen for radar.  Transmit radar pulses for 60 seconds.  Validate available non-DFS channels. NO.40 Which site survey ensures that RF design requirements are satisfied?  passive  spectrum  real time  active NO.41 Which organization is responsible for certifying that products and technology satisfy Wi-Fi interoperability?  Wi-Fi Alliance  IETF  IEEE  ISO NO.42 Which statement is correct about Wi-Fi?  Wi-Fi operates at full-multiplex.  Only two devices can transmit on the same channel at the same time.  A user device can be connected on multiple frequency bands at the same time.  Wi-Fi operates at half-duplex. NO.43 Mist Radio Resource Management makes dynamic changes to which resource?  RF template  channel width  channel  BLE channel NO.44 Which statement is correct about 802.11 wireless network interfaces?  Wireless NICs process all frames that are heard.  Wireless NICs use Carrier Sense Multiple Access Collision Detection.  Wireless NICs operate in full-duplex mode.  A wireless NIC only receives frames destined for it. NO.45 You have discovered an access point that is connected to a corporate network, but it is not under the corporation’s control.In this scenario, what is this type of access point called?  honeypot  air gap  rogue  neighbor NO.46 Which two 802.11 amendments operate within the 2.4 GHz band? (Choose two.)  802.11ax  802.11ac  802.11a  802.11b NO.47 You are troubleshooting a WLAN from a mobile handheld device that displays radio information. You see a signal on the same SSID from two separate access points (APs). AP A shows a signal strength of -57 dBm and AP B shows a signal strength of -72 dBm.In this scenario, which statement is correct?  dBm is not a measure of signal strength.  The client’s signal strength is not known.  Access point A has the stronger signal.  Access point B has the stronger signal.  Loading … Juniper JN0-250 Certification Exam covers the following Topics: JN0-250 exam dumps cover the following topics of the Juniper JN0-250 Certification Exam: Routing Protocols and Concepts: 20%Controlling Device Security and Access Control: 10%Configuring Border Gateway Protocol (BGP): 10%Implementing the Network: 20%   Pass Juniper JN0-250 exam - questions - convert Tets Engine to PDF: https://www.topexamcollection.com/JN0-250-vce-collection.html --------------------------------------------------- Images: https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-02-10 14:49:30 Post date GMT: 2023-02-10 14:49:30 Post modified date: 2023-02-10 14:49:30 Post modified date GMT: 2023-02-10 14:49:30