This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ] Export date:Thu Apr 3 3:02:35 2025 / +0000 GMT ___________________________________________________ Title: 2024 Realistic 300-440 Dumps are Available for Instant Access [Q24-Q46] --------------------------------------------------- 2024 Realistic 300-440 Dumps are Available for Instant Access Download Exam 300-440 Practice Test Questions with 100% Verified Answers NO.24 A company with multiple branch offices wants a suitable connectivity model to meet these network architecture requirements:* high availability* quality of service (QoS)* multihoming* specific routing needsWhich connectivity model meets these requirements?  hub-and-spoke topology using MPLS with static routing and dedicated bandwidth for QoS  star topology with internet-based VPN connections and BGP for routing  hybrid topology that combines MPLS and SD-WAN  fully meshed topology with SD-WAN technology using dynamic routing and prioritized traffic for QoS A fully meshed topology with SD-WAN technology using dynamic routing and prioritized traffic for QoS meets the network architecture requirements of the company. A fully meshed topology provides high availability by eliminating single points of failure and allowing multiple paths between branch offices.SD-WAN technology enables multihoming by supporting multiple transport options, such as MPLS, internet, LTE, etc. SD-WAN also provides QoS by applying policies to prioritize traffic based on application, user, or network conditions. Dynamic routing allows the SD-WAN solution to adapt to changing network conditions and optimize the path selection for each traffic type. A fully meshed topology with SD-WAN technology can also support specific routing needs, such as segment routing, policy-based routing, or application-aware routing. References:Designing and Implementing Cloud Connectivity (ENCC) v1.0[Cisco SD-WAN Design Guide][Cisco SD-WAN Configuration Guide]NO.25 An engineer is implementing a highly securemultitierapplication in AWS that includes S3. RDS, and some additional private links. What is critical to keep the traffic safe?  VPC peering and bucket policies  specific routing and bucket policies  EC2 super policies and specific routing policies  gateway load balancers and specific routing policies A highly secure multitier application in AWS that includes S3, RDS, and some additional private links requires specific routing and bucket policies to keep the traffic safe. The reasons are as follows:Specific routing policies are needed to ensure that the traffic between the tiers is routed through the private links, which provide secure and low-latency connectivity between AWS services and on-premises resources12. The private links can also prevent the exposure of the data and the application logic to the public internet12.Bucket policies are needed to control the access to the S3 buckets that store the application data34. Bucket policies can specify the conditions under which the requests are allowed or denied, such as the source IP address, the encryption status, the request time, etc.34. Bucket policies can also enforce encryption in transit and at rest for the data in S334.References :=1: AWS PrivateLink2: AWS PrivateLink FAQs3: Using Bucket Policies and User Policies4: Bucket Policy ExamplesNO.26 Which Microsoft Azure service enables a dedicated and secure connection between an on-premises infrastructure and Azure data centers through a colocation provider?  Azure Private Link  Azure ExpressRoute  Azure Virtual Network  Azure Site-to-Site VPN Azure ExpressRoute is a service that enables a dedicated and secure connection between an on-premises infrastructure and Azure data centers through a colocation provider. A colocation provider is a third-party data center that offers network connectivity services to multiple customers. Azure ExpressRoute allows customers to bypass the public internet and connect directly to Azure services, such as virtual machines, storage, databases, and more. This provides benefits such as lower latency, higher bandwidth, more reliability, and enhanced security. Azure ExpressRoute also supports hybrid scenarios, such as connecting to Office 365, Dynamics 365, and other SaaS applications hosted on Azure. Azure ExpressRoute requires a physical connection between the customer’s network and the colocation provider’s network, as well as a logical connection between the customer’s network and the Azure virtual network. The logical connection is established using a Border Gateway Protocol (BGP) session, which exchanges routing information between the two networks. Azure ExpressRoute supports two models: standard and premium. The standard model offers connectivity to all Azure regionswithin the same geopolitical region, while the premium model offers connectivity to all Azure regions globally, as well as additional features such as increased route limits, global reach, and Microsoft peering. References: Designing and Implementing Cloud Connectivity (ENCC) v1.0, Learning Plan: Designing and Implementing Cloud Connectivity v1.0 (ENCC 300-440) Exam Prep, ENCC | Designing and Implementing Cloud Connectivity | NetecNO.27 An engineer must enable the OMP advertisement of BGP routes for a specific VRF instance on a Cisco IOS XE SD-WAN device. What should be configured after the global address-family ipv4 is configured?  Set the VRF-specific route advertisements.  Enable bgp advertisement.  Enter sdwan mode.  Disable bgp advertisement. To enable the OMP advertisement of BGP routes for a specific VRF instance on a Cisco IOS XE SD-WAN device, the engineer must first configure the global address-family ipv4 and then enable bgp advertisement under the vrf definition. This will allow the device to advertise the BGP routes learned from the cloud provider to the OMP control plane, which will then distribute them to the other SD-WAN devices in the overlay network1 References := 1: Designing and Implementing Cloud Connectivity (ENCC) v1.0, Module 3: Implementing Cloud Connectivity, Lesson 3: Configuring IPsec VPN from Cisco IOS XE to AWS, Topic: Configuring BGP on the Cisco IOS XE Device, Page 3-24.NO.28 Refer to the exhibit.Refer to the exhibits. An engineer troubleshoots a Cisco SD-WAN connectivity issue between an on-premises data center WAN Edge and a public cloud provider WAN Edge. The engineer discovers that BFD is Dapping on vEdge1. What is the problem?  The remote Edge device BFD is down.  The remote Edgedevice failed to respond BFD keepalives.  The remote Edge device has a duplicate IP address.  The control plane deleted the BFD session. BFD (Bidirectional Forwarding Detection) is a protocol that detects failures in the overlay tunnel between Cisco SD-WAN devices. BFD packets are sent and received periodically by each device to check the liveliness and quality of the connection. If a device does not receive a BFD packet from its peer within a specified timeout interval, itconsiders the peer to be unreachable and reports a BFD down event. This event triggers a control connection state change and a possible route change in the SD-WAN fabric.In this scenario, the engineer discovers that BFD is flapping on vEdge1, which means that the BFD session between vEdge1 and the remote Edge device is going up and down repeatedly. This indicates a connectivity issue between the two devices, such as network congestion, packet loss, or misconfiguration. The most likely cause of the problem is that the remote Edge device failed to respond BFD keepalives within the timeout interval, which resulted in a BFD timeout event on vEdge1. This event caused vEdge1 to mark the remote Edge device as down and notify the control plane. The control plane then tried to establish a new BFD session with the remote Edge device, which may have succeeded or failed depending on the network condition. This cycle of BFD session creation and deletion caused the BFD flapping on vEdge1.The other options are less likely to be the cause of the problem. Option A is incorrect because if the remote Edge device BFD was down, vEdge1 would not receive any BFD packets from it and would not flap. Option C is incorrect because if the remote Edge device had a duplicate IP address, vEdge1 would not be able to establish a BFD session with it in the first place. Option D is incorrect because the control plane does not delete the BFD session unless there is a configuration change or a port-hop event on the device. References: Bidirectional Forwarding Detection Flap-Reason Definitions on Cisco vEdge Routers, Cisco Catalyst SD-WAN BFD, Cisco SD WAN: BFD (Bidirectional Forwarding Detection)NO.29 A company with multiple branch offices wants a connectivity model to meet its network architecture requirements. The company focuses on ensuring low latency and efficient routing for its critical business applications. Which connectivity model meets these requirements?  hub-and-spoke topology with SD-WAN technology, using dynamic routing and OSPF as the routing protocol  fully meshed topology with SD-WAN technology, using dynamic routing and BGP as the routing protocol  point-to-point topology using dedicated leased lines and static routing  star topology with internet-based VPN connections and static routing A fully meshed topology with SD-WAN technology, using dynamic routing and BGP as the routing protocol, meets the requirements of the company because it provides the following benefits:It allows direct and secure connectivity between any two branch offices, without the need for a central hub or intermediary devices12. This reduces the latency and improves the performance of the critical business applications.It leverages SD-WAN technology to optimize the traffic flow and application quality of service (QoS) across the WAN13. SD-WAN can dynamically select the best path for each application based on the network conditions and policies13. SD-WAN can also provide redundancy, security, and visibility for the WAN13.It uses dynamic routing and BGP as the routing protocol to exchange routing information and establish connectivity between the branch offices14. BGP is a scalable and flexible protocol that can support multiple address families, such as IPv4 and IPv6, and multiple routing policies, such as local preference and route filtering14. BGP can also enable seamless integration with the cloud service providers (CSPs) and internet service providers (ISPs)14.References :=1: Designing and Implementing Cloud Connectivity (ENCC, Track 1 of 5) (Cisco U. login required)2: Cisco SD-WAN Design GuideNO.30 An engineer must configure a CLI add-on feature template in Cisco vManage for enhanced policy-based routing (ePBR) for IPv4. These configurations were deleted:* licensing config enable false* licensing config privacy hostname true* licensing config privacy version false* licensing config utility utility-enable trueDrag and drop the steps from the left onto the order on the right to complete the configuration. Explanation:Step 1 = Click Configuration, select Templates, and then select Feature Templates. Step 2 = Click Add Template, select the device, and then click Select Template. Step 3 = Click CLI Add-On Template and enter the name and description. Step 4 = Paste the CLI configuration and then click Save.The process of configuring a CLI add-on feature template in Cisco vManage for enhanced policy-based routing (ePBR) for IPv4 involves several steps1234.Click Configuration, select Templates, and then select Feature Templates: This is the first step where you navigate to the Templates section in the Configuration menu of Cisco vManage1.Click Add Template, select the device, and then click Select Template: In this step, you add a new template for the device1.Click CLI Add-On Template and enter the name and description: After setting up the template, you select the CLI Add-On Template option, and then enter the name and description for the template1.Paste the CLI configuration and then click Save: Finally, you paste the CLI configuration into the template and save the changes1.References :=CLI Add-On Feature Templates – CiscoCisco Catalyst SD-WAN Systems and Interfaces Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x – CLI Add-On Feature Templates Cisco SD-WAN vSmart CLI Template – NetworkLessons.com CLI Templates for Cisco XE SD-WAN RoutersNO.31 Refer to the exhibit.A company uses Cisco SD-WAN in the data center. All devices have the default configuration. An engineer attempts to add a new centralized control policy in Cisco vManage but receives an error message. What is the problem?  A centralized control policy is already applied to the specific site ID and direction  The policy for “Hub” should be applied in the outbound direction, and the policy for “All-Site” should be applied inbound.  Apply an additional outbound control policy to override the site ID overlaps.  Site-list “All-Site” should be configured with a new match sequence that is lower than the sequence for site-list “Hub*. The problem is that the site-list “All-Site” has a higher match sequence than the site-list “Hub”, which means that the policy for “All-Site” will take precedence over the policy for “Hub” for any site that belongs to both lists. This creates a conflict and prevents the engineer from adding a new centralized control policy in Cisco vManage. To resolve this issue, the site-list “All-Site” should be configured with a new match sequence that is lower than the sequence for site-list “Hub”, so that the policy for “Hub” will be applied first and then the policy for “All-Site” will be applied only to the remaining sites that are not in the “Hub” list. References := Designing and Implementing Cloud Connectivity (ENCC, Track 1 of 5), Module 3: Cisco SD-WAN Cloud OnRamp for Colocation, Lesson 3: Cisco SD-WAN Cloud OnRamp for Colocation – Centralized Control Policies Cisco SD-WAN Cloud OnRamp for Colocation Deployment Guide, Chapter 4: Configuring Centralized Control Policies Cisco SD-WAN Configuration Guide, Release 20.3, Chapter: Centralized Policy Framework, Section:Policy Configuration OverviewNO.32 An engineer needs to configure enhanced policy-based routing (ePBR) for IPv4 by using Cisco vManage.Drag and drop the steps from the left onto the order on the right to complete the configuration of the ePBR using the CLI add-on template. Explanation:Enhanced Policy-Based Routing (ePBR) is used to direct packets that arrive at an interface to a specified next-hop. It is very useful in managing a large number of configured access lists more efficiently. In ePBR, the router drops the traffic packets if the next hop configured in the PBR policy is not reachable. To avoid packet loss in such scenarios, you must configure multiple next hops for each access control entry.Here are the steps to configure ePBR for IPv4 using Cisco vManage:Configure an extended ACL: This step involves defining the network or the host. For example, you can permit IPv4 traffic from any source to specific hosts.Configure a class map that matches the ACL: Class maps match the parameters in the ACLs. For instance, you can create a class map of type traffic and match it with the previously created ACL.Configure the policy map with the action to set the next hop: Policy maps with ePBR then take detailed actions based on the set statements configured. You can configure an ePBR policy map with the class map and set the next hop.Apply the service policy on the interface: Finally, you apply the ePBR policy map to the interface. For example, you can apply the policy map to a GigabitEthernet interface.References :=Implementing Enhanced Policy Based Routing – CiscoCisco Catalyst SD-WAN Policies Configuration Guide, Cisco IOS XEHow to configure PBR – Cisco CommunityNO.33 Refer to the exhibit.A network engineer discovers that the policy that is configured on an on-premises Cisco WAN edge router affects only the route tables of the specific devices that are listed in the site list. What is the problem?  An inbound policy must be applied.  The action must be set to deny  A localized data policy must be configured.  A centralized data policy must be configured A centralized data policy is a policy that is applied to all devices in the overlay network, regardless of the site list. A localized data policy is a policy that is applied only to the devices that are listed in the site list. In this case, the network engineer wants to apply the policy to all devices in the overlay network, not just the specific devices in the site list. Therefore, a centralized data policy must be configured on the on-premises Cisco WAN edge router. References := Designing and Implementing Cloud Connectivity (ENCC) v1.0, Module 3: Implementing Cloud Connectivity, Lesson 3: Implementing Cisco SD-WAN Cloud OnRamp for Colocation, Topic:Centralized Data Policy[Cisco SD-WAN Cloud OnRamp for Colocation Deployment Guide], Chapter: Configuring Centralized Data PolicyNO.34 Which architecture model establishes internet-based connectivity between on-premises networks and AWS cloud resources?  That establishes an iPsec VPN tunnel with Internet Key Exchange (IKE) for secure key negotiation and encrypted data transmission  That relies on AWS Elastic Load Balancing (ELB) for traffic distribution and uses SSL/TLS encryption for secure data transmission.  That employs AWS Direct Connect for a dedicated network connection and uses private IP addresses tor secure communication.  That uses Amazon CloudFrontfor caching and distributing content globally and uses HTTPS for secure data transfer. The architecture model that establishes internet-based connectivity between on-premises networks and AWS cloud resources is the one that establishes an iPsec VPN tunnel with Internet Key Exchange (IKE) for secure key negotiation and encrypted data transmission. This model is also known as the VPN CloudHub model12. It allows multiple remote sites to connect to the same virtual private gateway in AWS, creating a hub-and-spoke topology1. The VPN CloudHub model provides the following benefits12:It enables secure communication between remote sites and AWS over the public internet, using encryption and authentication protocols such as IPsec and IKE.It supports dynamic routing protocols such as BGP, which can automatically adjust the routing tables based on the availability and performance of the VPN tunnels.It allows for redundancy and load balancing across multiple VPN tunnels, increasing the reliability and throughput of the connectivity.It simplifies the management and configuration of the VPN connections, as each remote site only needs to establish one VPN tunnel to the virtual private gateway in AWS, rather than multiple tunnels to different VPCs or regions.The other options are not correct because they do not establish internet-based connectivity between on-premises networks and AWS cloud resources. Option B relies on AWS Elastic Load Balancing (ELB) for traffic distribution and uses SSL/TLS encryption for secure data transmission. However, ELB is a service that distributes incoming traffic across multiple targets within a VPC, not across different networks3. Option C employs AWS Direct Connect for a dedicated network connection and uses private IP addresses for secure communication. However, AWS Direct Connect is a service that establishes a private connection between on-premises networks and AWS, bypassing the public internet4. Option D uses Amazon CloudFront for caching and distributing content globally and uses HTTPS for secure data transfer. However, Amazon CloudFront is a service that delivers static and dynamic web content to end users, not to on-premises networks5.References:1: Designing and Implementing Cloud Connectivity (ENCC, Track 1 of 5)2: Cisco ASA Site-to-Site VPN3: What Is Elastic Load Balancing?4: What is AWS Direct Connect?NO.35 Which feature is unique to Cisco SD-WAN IPsec tunnels compared to native IPsec VPN tunnels?  real-time dynamic path selection  tunneling protocols  end-to-end encryption  authentication mechanisms Cisco SD-WAN IPsec tunnels are different from native IPsec VPN tunnels in several ways. One of the unique features of Cisco SD-WAN IPsec tunnels is that they support real-time dynamic path selection, which means that they can automatically choose the best path for each application based on the network conditions and policies. This feature improves the performance, reliability, and efficiency of the network traffic. Native IPsec VPN tunnels, on the other hand, do not have this capability and rely on static routing or manual configuration to select the path for each tunnel. This can result in suboptimal performance, increased latency, and higher costs. References := Traditional IPsec Versus Cisco SD-WAN IPsec, SD-WAN vs IPsec VPN’s – What’s the difference?, SD-WAN vs. VPN: How Do They Compare?, Traditional IPSEC Versus SD-WAN IPSECNO.36 An engineer must edit the settings of a site-to-site IPsec VPN connection between an on-premises Cisco IOS XE router and Amazon Web Services (AWS). IPsec must be configured to support multiple peers and failover after 120 seconds of idle time on the first entry of the crypto map named Cisco. Drag and drop the commands from the left onto the order on the right. Explanation:Step 1 = crypto map cisco 1 ipsec-isakmp Step 2 = set peer 192.168.10.1 default Step 3 = set peer192.168.20.1 Step 4 = set security-association idle-time 120 defaultThe process of editing the settings of a site-to-site IPsec VPN connection between an on-premises Cisco IOS XE router and Amazon Web Services (AWS), and configuring IPsec to support multiple peers and failover after 120 seconds of idle time on the first entry of the crypto map named Cisco involves several steps123456.crypto map cisco 1 ipsec-isakmp: This command is used to create a new entry in the crypto map named“cisco”. The “1” is the sequence number of the entry, and “ipsec-isakmp” specifies that the IPSec security associations (SAs) should be established using the Internet Key Exchange (IKE) protocol13.set peer 192.168.10.1 default: This command is used to specify the IP address of the default peer for the crypto map entry. In this case, the default peer is at IP address 192.168.10.115.set peer 192.168.20.1: This command is used to add an additional peer to the crypto map entry. In this case, the additional peer is at IP address 192.168.20.1. This allows the IPsec VPN to support multiple peers56.set security-association idle-time 120 default: This command is used to set the idle time for the security association. If no traffic is detected over the VPN for the specified idle time (in this case, 120 seconds), the security association is deleted, and the VPN connection fails over to the next peer46.References :=Configure a Site-to-Site IPSec IKEv1 Tunnel Between an ASA and a Cisco IOS Router – Cisco Configure IOS-XE Site-to-Site VPN Connection to Amazon Web Services – Cisco Community Configuring Site to Site IPSec VPN Tunnel Between Cisco Routers Configure Failover for IPSec Site-to-Site Tunnels with Backup ISP Links on FTD Managed by FMC – Cisco Does Setting Multiple Peers in a Crypto Map Also Support Parallel IPSec Connections – Cisco Community Multiple WAN Connections – IPsec in Multi-WAN Environments | pfSense Documentation Multiple Set Peer for VPN Failover – Server FaultNO.37 Drag and drop the commands from the left onto the purposes on the right to identify issues on a Cisco IOS XE SD-WAN device. Explanation:Display the time and process information of the device, as well as CPU, memory, and disk usage data. = show sdwan system status1 Validate the configured zone-based firewall. = show policy-firewall config1 Display information about application-aware routing policy matched packet counts on the Cisco IOS XE SD-WAN devices. = show sdwan policy app-route-policy-filter1 View the security information that is configured for IPsec tunnel connections. = show sdwan security-info The commands used to identify issues on a Cisco IOS XE SD-WAN device are as follows1:show sdwan system status: This command is used to display the time and process information of the device, as well as CPU, memory, and disk usage data1.show policy-firewall config: This command is used to validate the configured zone-based firewall1.show sdwan policy app-route-policy-filter: This command is used to display information about application-aware routing policy matched packet counts on the Cisco IOS XE SD-WAN devices1.show sdwan security-info: This command is used to view the security information that is configured for IPsec tunnel connections1.References :=Cisco IOS XE Catalyst SD-WAN Qualified Command ReferenceCisco Catalyst SD-WAN Command ReferenceCisco Catalyst SD-WAN Systems and Interfaces Configuration Guide, Cisco IOS XE SD-WAN Tunnel Interface Commands – CiscoNO.38 A company has multiple branch offices across different geographic locations and a centralized data center. The company plans to migrate Its critical business applications to the public cloud infrastructure that is hosted in Microsoft Azure. The company requires high availability, redundancy, and low latency for its business applications. Which connectivity model meets these requirements?  ExpressRoute with private peering using SDCI  hybrid connectivity with SD-WAN  AWS Direct Connect with dedicated connections  site-to-site VPN with Azure VPN gateway The connectivity model that meets the requirements of high availability, redundancy, and low latency for the company’s business applications is ExpressRoute with private peering using SDCI.ExpressRoute is a service that provides a dedicated, private, and high-bandwidth connection between the customer’s on-premises network and Microsoft Azure cloud network1.Private peering is a type of ExpressRoute circuit that allows the customer to access Azure services that are hosted in a virtual network, such as virtual machines, storage, and databases2.SDCI (Secure Data Center Interconnect) is a Cisco solution that enables secure and scalable connectivity between multiple data centers and cloud providers, using technologies such as MPLS, IPsec, and SD-WAN3.By using ExpressRoute with private peering and SDCI, the company can achieve the following benefits:High availability: ExpressRoute circuits are redundant and resilient, and can be configured with multiple service providers and locations for failover and load balancing1. SDCI also provides high availability by using dynamic routing protocols and encryption mechanisms to ensure optimal and secure path selection3.Redundancy: ExpressRoute circuits can be paired together to form a redundant connection between the customer’s network and Azure4. SDCI also supports redundancy by allowing multiple connections between data centers and cloud providers, using different transport technologies and service levels3.Low latency: ExpressRoute circuits offer lower latency than public internet connections, as they bypass the congestion and variability of the internet1. SDCI also reduces latency by using MPLS and SD-WAN to optimize the performance and quality of service for the traffic between data centers and cloud providers3.References:What is Azure ExpressRoute?Azure ExpressRoute peeringCisco Secure Data Center InterconnectExpressRoute circuit and routing domainNO.39 An engineer must configure cloud connectivity with Cisco Umbrella Secure Internet Gateway (SIG) in active/backup mode. The engineer already configured the SIG Credentials and SIG Feature Templates. Drag and drop the steps from the left onto the order on the right to complete the configuration. Explanation:The configuration of cloud connectivity with Cisco Umbrella Secure Internet Gateway (SIG) in active/backup mode involves several steps. After configuring the SIG Credentials and SIG Feature Templates, the engineer must:Select the SIG provider for the primary tunnel: This is the first step in setting up the active/backup mode. The primary tunnel is the main connection path for the cloud connectivity.Add the secondary tunnel: The secondary tunnel serves as a backup in case the primary tunnel fails. It ensures that the cloud connectivity remains uninterrupted even if there are issues with the primary tunnel.Create one high-availability pair using primary and secondary tunnels: This step involves pairing the primary and secondary tunnels to create a high-availability pair. Thisensures that the cloud connectivity will switch over to the secondary tunnel seamlessly if the primary tunnel fails.Edit the service-side VPN template to inject a service route: The final step involves modifying the VPN template on the service side to include a service route. This ensures that the traffic is correctly routed through the primary or secondary tunnel as needed.References :=Designing and Implementing Cloud Connectivity (ENCC) v1.01Learning Plan: Designing and Implementing Cloud Connectivity v1.0 (ENCC 300-440) Exam Prep2 Configure Umbrella SIG Tunnels for Active/Backup or Active/Active Scenarios – Cisco3 Loading … Cisco 300-440 Exam Syllabus Topics: TopicDetailsTopic 1SD-WAN Cloud Connectivity: Questions about configuration of SD-WAN-based cloud connectivity using Cisco infrastructure appear in this topic. Furthermore, it discusses configuration of Cisco SD-WAN OnRamp, configuration for connecting to a SaaS cloud provider, and configuration of Cisco SD-WAN policies to address traffic.Topic 2Operation: The topic delves into diagnosis of IPsec-based secure cloud connectivity between an on-premises native Cloud endpoints and Cisco IOS XE router. It also explains the diagnosis of routing issues on Cisco IOS XE routers, and diagnosis of Cisco SD-WAN policy issues, focusing on all the traffic.Topic 3Architecture Models: In this topic different aspects of connectivity to cloud providers are discussed. It focuses on AWS, Azure, and Google Cloud. Moreover, the topic explains private connectivity to leading cloud providers and connectivity options for Software as a Service (SaaS) cloud providers.Topic 4Design: Questions about cloud-native security policies for AWS, Azure, and Google Cloud appear in this topic. It also recommends connectivity models that ensure high availability, resiliency, SLAs, and reliability. Furthermore, the topic delves into connectivity models based on network architecture requirements. The topic further discusses factors including bandwidth, QoS, dedicated vs shared connections and multi-homing.Topic 5IPsec Cloud Connectivity: The configuration of IPsec-based secure cloud connectivity is one of the focal points of this topic. Additionally, it delves into configuration of IPsec-based secure cloud connectivity between an on-premises Cisco IOS XE router and native Azure, AWS, and Google Cloud endpoints. Lastly, the topic discusses configuration of routing on Cisco IOS XE routers.   Positive Aspects of Valid Dumps 300-440 Exam Dumps! : https://www.topexamcollection.com/300-440-vce-collection.html --------------------------------------------------- Images: https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif https://blog.topexamcollection.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-07-10 12:49:49 Post date GMT: 2024-07-10 12:49:49 Post modified date: 2024-07-10 12:49:49 Post modified date GMT: 2024-07-10 12:49:49