(2024) N10-008 Exam Dumps, Practice Test Questions BUNDLE PACK [Q172-Q196] : Top Exam Collection : http://blog.topexamcollection.com

Top Exam Collection
https://blog.topexamcollection.com/2024/11/2024-n10-008-exam-dumps-practice-test-questions-bundle-pack-q172-q196/
Export date: Sat Apr 5 10:33:38 2025 / +0000 GMT

(2024) N10-008 Exam Dumps, Practice Test Questions BUNDLE PACK [Q172-Q196]

(2024) N10-008 Exam Dumps, Practice Test Questions BUNDLE PACK

CompTIA Network+ Certification N10-008 Sample Questions Reliable

CompTIA N10-008 exam is designed to test the candidate's knowledge in various networking concepts. N10-008 exam covers topics such as network architecture, network operations, network security, network troubleshooting, and industry standards, protocols, and technologies. N10-008 exam consists of 90 multiple-choice and performance-based questions and has a time limit of 90 minutes.

Importance of CompTIA N10-008 Exam to secure your future

CompTIA Network+ is one of the most popular qualifications available to networking professionals and has become a global standard for establishing the foundational knowledge required by network administrators.

CompTIA Network+ N10-008 certificate is proof that the candidate has passed all the requirements of a good IT specialist.
It shows that you have the skills to secure network infrastructures.
It is the only industry certification that covers the latest trends in network technologies including unified communications, mobile and cloud computing and virtualization technologies.
This course will go through each section of the exam objectives, highlighting the key areas that you need to focus on.

QUESTION 172
An AP uses a 98ft (30m) Cat 6 cable to connect to an access switch. The cable is wired through a duct close to a three-phase motor installation. Anytime the three-phase is turned on, all users connected to the switch experience high latency on the network. Which Of the following is MOST likely the cause Of the issue?

Interference

Attenuation

Open circuit

Short circuit

QUESTION 173
A network administrator is configuring a load balancer for two systems. Which of the following must the administrator configure to ensure connectivity during a failover?

VIP

NAT

APIPA

IPv6 tunneling

Broadcast IP

QUESTION 174
A software developer changed positions within a company and is now a sales engineer. The security team discovered that the former software developer had been modifying code to implement small features requested by customers. Which of the following would be the best thing for the security administrator to implement to prevent this from happening?

A software patching policy

A role-based access control policy

Firewalls on the software development servers

Longer and more complex password requirements

QUESTION 175
An organization with one core and five distribution switches is transitioning from a star to a full-mesh topology Which of the following is the number of additional network connections needed?

QUESTION 176
A SQL server connects over port:

445.

995

1433.

1521.

QUESTION 177
A new global ISP needs to connect from central offices in North America to the United Kingdom.
Which of the following would be the BEST cabling solution for this project?

Single-mode

Coaxial

Cat 6a

Twinaxial

QUESTION 178
A help desk technician discovers the following note while reviewing tickets in a customer’s account:

Which of the following describes what the technician was documenting with this note?

The technician was approaching multiple problems individually.

The technician was establishing a plan of action and identifying potential effects.

The technician was testing a theory to determine the cause.

The technician was identifying the problem by gathering information.

QUESTION 179
A network engineer designed and implemented a new office space with the following characteristics:
One month after the office space was implemented, users began reporting dropped signals when entering another room and overall poor connections to the 5GHz network. ‘which of the following should the engineer do to best resolve the issue?

use non-overlapping channels

Reconfigure the network to support 2.4GHz_

Upgrade to WPA3.

Change to directional antennas-

QUESTION 180
After rebooting an AP a user is no longer able to conned to me enterprise LAN A technician plugs a laptop In to the same network jack and receives the IP 169.254 0 200. Which of the following is MOST likely causing the issue?

DHCP scope exhaustion

Signal attenuation

Channel overlap

Improper DNS configuration

QUESTION 181
A network technician is troubleshooting an application issue. The technician is able to recreate the issue in a virtual environment. According to the troubleshooting methodology, which of the following actions will the technician most likely perform NEXT?

Gather information from the initial report.

Escalate the issue to a supervisor.

Implement a solution to resolve the issue.

Establish a theory of probable cause.

QUESTION 182
DHCP uses which of the following ports by default?

443

QUESTION 183
Which of the following demarcation connections would be MOST appropriate to use with a cable modem being installed in a SOHO situation?

RG6

Cat 6

RJ11

Multimode fiber

QUESTION 184
Which of the following demarcation connections would be MOST appropriate to use with a cable modem being installed in a SOHO situation?

RG6

Cat 6

RJ11

Multimode fiber

QUESTION 185
At which of the following OSI model layers does a MAC filter list for a wireless infrastructure operate?

Physical

Network

Session

Data link

QUESTION 186
A user stores large graphic files. The time required to transfer the files to the server is excessive due to network congestion. The user’s budget does not allow for the current switches to be replaced. Which of the following can be used to provide FASTER transfer times?

Half duplex

Jumbo frames

LACP

802.1Q

QUESTION 187
Which of the following uses the link-state routing algorithm and operates within a single autonomous system?

EIGRP

OSPF

RIP

BGP

QUESTION 188
A user is trying to reach an internet destination. A systems administrator thinks that packets are being dropped in transit. Which of the following command-line tools would confirm if the packets are being dropped?

nslookup

traceroute

arp

telnet

QUESTION 189
You are tasked with verifying the following requirements are met in order to ensure network security.
Requirements:
Datacenter
Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 traffic Building A Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide devices to support 5 additional different office users Add an additional mobile user Replace the Telnet server with a more secure solution Screened subnet Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide a server to handle external 80/443 traffic Provide a server to handle port 20/21 traffic INSTRUCTIONS Drag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled.
Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

QUESTION 190
Given the following output:

Which of the following attacks is this MOST likely an example of?

ARP poisoning

VLAN hopping

Rogue access point

Amplified DoS

QUESTION 191
A technician is assisting a user who cannot connect to a network resource. The technician first checks for a link light. According to troubleshooting methodology, this is an example of:

using a bottom-to-top approach.

establishing a plan of action.

documenting a finding.

questioning the obvious.

QUESTION 192
A network administrator redesigned the positioning of the APs to create adjacent areas of wireless coverage. After project validation, some users still report poor connectivity when their devices maintain an association to a distanced AP. Which of the following should the network administrator check FIRST?

Validate the roaming settings on the APs and WLAN clients

Verify that the AP antenna type is correct for the new layout

Check to see if MU-MIMO was properly activated on the APs

Deactivate the 2.4GHz band on the APS

QUESTION 193
A firewall administrator observes log entries of traffic being allowed to a web server on port 80 and port 443. The policy for this server is to only allow traffic on port 443. The firewall administrator needs to investigate how this change occurred to prevent a reoccurrence. Which of the following should the firewall administrator do next?

Consult the firewall audit logs.

Change the policy to allow port 80.

Remove the server object from the firewall policy.

Check the network baseline.

QUESTION 194
A technician is troubleshooting reports that a networked printer is unavailable. The printer’s IP address is configured with a DHCP reservation, but the address cannot be pinged from the print server in the same subnet. Which of the following is MOST likely the cause of me connectivity failure?

Incorrect VLAN

DNS failure

DHCP scope exhaustion

Incorrect gateway

* A VLAN is a virtual local area network that logically separates devices on the same physical network.
VLANs can improve network performance, security, and management by reducing broadcast domains and isolating traffic.
* A DHCP reservation is a feature that allows a network administrator to assign a specific IP address to a device based on its MAC address. This ensures that the device always receives the same IP address from the DHCP server, even if the lease expires or the device reboots.
* A networked printer is a device that can be shared by multiple users on the same network. A networked printer typically has a built-in network interface card (NIC) that allows it to communicate with other devices using TCP/IP protocols.
* A print server is a device or a software application that manages the printing requests from multiple clients. A print server can also provide additional features such as print queue management, printer driver installation, and printer status monitoring.
* A subnet is a logical division of an IP network that allows devices to communicate more efficiently and securely. A subnet is defined by a network address and a subnet mask, which determine the range of valid IP addresses within the subnet. Devices on the same subnet can communicate directly with each other without the need for a router.
* A ping is a network diagnostic tool that tests the connectivity and reachability between two devices by sending and receiving echo packets. A ping request can fail for various reasons, such as network congestion, firewall settings, routing issues, or device configuration errors.
* Based on the question, the networked printer is unavailable because it cannot be pinged from the print server in the same subnet. This means that there is a problem with the layer 2 connectivity between the two devices, which is determined by the MAC addresses and the VLANs. The most likely cause of this problem is that the printer and the print server are on different VLANs, which prevents them from communicating with each other. The other options are less likely because they affect the layer 3 connectivity, which is determined by the IP addresses and the gateways. A DNS failure would not affect the ping request, since it uses IP addresses and not hostnames. A DHCP scope exhaustion would not affect the printer, since it has a DHCP reservation that guarantees its IP address. An incorrect gateway would not affect the communication within the same subnet, since it is only used for routing packets to other networks. References:
* CompTIA Network+ N10-008 Study Guide, Chapter 2: Network Devices and Technologies, Section
2.2: Network Device Functions and Features, Subsection: Print Servers, pp. 76-77.
* CompTIA Network+ N10-008 Study Guide, Chapter 3: Network Operations, Section 3.3: Network Configuration Management, Subsection: DHCP, pp. 144-146.
* CompTIA Network+ N10-008 Study Guide, Chapter 4: Network Security, Section 4.2: Network Segmentation and Isolation, Subsection: VLANs, pp. 202-204.
* Professor Messer’s CompTIA N10-008 Network+ Course Notes, Section 1.5: Network Troubleshooting Methodology, Subsection: Identify the Problem, pp. 16-17.
* Professor Messer’s CompTIA N10-008 Network+ Course Notes, Section 2.2: Network Devices, Subsection: Print Servers, p. 28.
* Professor Messer’s CompTIA N10-008 Network+ Course Notes, Section 2.6: Network Addressing, Subsection: DHCP, p. 38.
* Professor Messer’s CompTIA N10-008 Network+ Course Notes, Section 2.7: Network Addressing, Subsection: Subnetting, p. 39.
* Professor Messer’s CompTIA N10-008 Network+ Course Notes, Section 3.5: Network Segmentation, Subsection: VLANs, p. 58.

QUESTION 195
Which of the following can be used to decrease latency during periods of high utilization of a firewall?

Hot site

NIC teaming

HA pair

VRRP

QUESTION 196
A technician is trying to install a VolP phone, but the phone is not turning on. The technician checks the cable gong from the phone to the switch, and the cable is good. Which of the following actions IS needed for this phone to work?

Add a POE injector

Enable MDIX.

Use a crossover cable.

Reconfigure the port.

* A POE injector is a device that provides power and data over a single Ethernet cable to a POE device, such as a VoIP phone, a wireless access point, or a security camera12.
* A POE injector is needed when the switch or router that connects to the POE device does not support POE or does not have enough POE ports available12.
* A POE injector can be installed between the switch or router and the POE device, using two Ethernet cables: one from the switch or router to the injector, and another from the injector to the POE device12.
* A POE injector can supply up to 30W of power per port, depending on the POE standard it supports (802.3af or 802.3at)12.
* B. Enable MDIX is not a correct answer because MDIX is a feature that allows a switch or router to automatically detect the type of cable (straight-through or crossover) and adjust the pin assignments accordingly34.
* MDIX is not related to providing power to a POE device, and it is usually enabled by default on modern switches and routers34.
* C. Use a crossover cable is not a correct answer because a crossover cable is a type of Ethernet cable that swaps the transmit and receive pairs of wires, allowing two devices of the same type (such as two switches or two computers) to communicate directly56.
* A crossover cable is not needed to connect a VoIP phone to a switch or router, as they are different types of devices that use different pin assignments56.
* A crossover cable also does not provide power to a POE device, and it may not work with gigabit Ethernet or auto-MDIX devices56.
* D. Reconfigure the port is not a correct answer because reconfiguring the port on the switch or router that connects to the VoIP phone does not address the issue of providing power to the phone78.
* Reconfiguring the port may involve changing the speed, duplex, VLAN, or security settings, but none of these affect the power delivery to the POE device78.
* Reconfiguring the port may also cause network connectivity or performance issues if the settings are not compatible with the VoIP phone or the network78.
References:
* What Is a PoE Injector and How to Use It? | FS Community
* Power Injector for PoE Networks | Eaton
* CCNA / CCENT / Network+ Tutorial: Crossover Cables And Auto MDI-X
* Straight-Through and Crossover Cables – N10-008 CompTIA Network+ : 2.3
* Straight-Through, Crossover, and Rollover Cables – CompTIA Network+ N10-006 – 1.5
* CompTIA Network+ Cheat Sheet (Updated for Latest Exam) – StationX
* CompTIA Network+ : Common TCP And UDP Default Ports – Tutorialsweb.Com
* A Guide to Network Troubleshooting – CompTIA

Prepare for the Actual CompTIA Network+ N10-008 Exam Practice Materials Collection: https://www.topexamcollection.com/N10-008-vce-collection.html ¹

Links:

https://www.topexamcollection.com/N10-008-vce-coll ection.html

Post date: 2024-11-17 10:08:08
Post date GMT: 2024-11-17 10:08:08

Post modified date: 2024-11-17 10:08:08
Post modified date GMT: 2024-11-17 10:08:08

Export date: Sat Apr 5 10:33:38 2025 / +0000 GMT
This page was exported from Top Exam Collection [ http://blog.topexamcollection.com ]