NEW QUESTION 58
Drag and Drop Question
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed. Server1 hosts a virtual machine named VM1.
Server1 has an NVMe storage device that is assigned to VM1 by using Discrete Device Assignment.
You need to make the device available to the host.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NEW QUESTION 59
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2022 and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1.
You deploy five printers to the network.
You need to ensure that the printers are always assigned the same IP address.
Solution: You configure the DHCP scope options for Scope1.
Does this meet the requirement?

NEW QUESTION 60
You have an Azure Active Directory Domain Services (Azure AD DS) domain.
You create a new user named Admin1.
You need Admin1 to deploy custom Group Policy settings to all the computers in the domain. The solution must use the principle of least privilege.
What should you include in the solution? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

NEW QUESTION 61
Your company has a main office and a branch office. The two offices are connected by using a WAN link. Each office contains a firewall that filters WAN traffic.
The network in the branch office contains 10 servers that run Windows Server. All servers are administered from the main office only.
You plan to manage the servers in the branch office by using a Windows Admin Center gateway.
On a server in the branch office, you install the Windows Admin Center gateway by using the defaults settings.
You need to configure the firewall in the branch office to allow the required inbound connection to the Windows Admin Center gateway.
Which inbound TCP port should you allow?

NEW QUESTION 62
You need to meet the technical requirements for User1. The solution must use the principle of least privilege.
What should you do?

NEW QUESTION 63
Which groups can you add lo Group3 and Groups? To answer, select the appropriate options in the answer are a. NOTE Each correct selection is worth one point.

NEW QUESTION 64
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a server named Server1 that has the DFS Namespaces role service installed. Server! hosts a domain-based Distributed File System (DFS) Namespace named Files.
The domain contains a tile server named Server2. Seiver2 contains a shared folder named Share1. Share1 contains a subfolder named Folder 1.
In the Files namespace, you create a folder named Folder! that has a target of \Server2.contoso.comShare1Folder1.
You need to configure a logon script that will map drive letter M to Folder1. The solution must use the path of the DFS Namespace.
How should you complete the command to map the drive letter? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 65
You have a server named Server1 that runs Windows Server Server1 has a just-a-bunch-of-disks (JBOD) enclosure attached.
You plan to create a storage pool on Server1 and a virtual disk that will use a mirror layout.
You are considering whether to use a two-way or a three-way mirror layout.
What is the minimum number of disks required for each type of minor layout? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 66
You have an Azure virtual machine named VM1 that contains the drives shown in the following table.

On VM1, you plan to install an app named App1. The data for App1 must be stored on a persistent data disk assigned to drive D.
You need assign the data disk to drive D.
What should you do on VM1 first?

NEW QUESTION 67
You deploy a single-domain Active Directory Domain Services (AD DS) forest named contoso.com.
You deploy five servers to the domain. You add the servers to a group named iTFarmHosts.
You plan to configure a Network Load Balancing (NIB) cluster named NLBCluster.contoso.com that will contain the five servers.
You need to ensure that the NLB service on the nodes of the cluster can use a group managed service account (gMSA) to authenticate.
Which three PowerShell cmdlets should you run in sequence? To answer, move the appropriate cmdiets from the list of cmdlets to the answer area and arrange them in the correct order.

NEW QUESTION 68
Your network contains an Active Directory domain named contoso.com. The domain contains the computers shown in the following table.

On Server3, you create a Group Policy Object (GPO) named GP01 and link GPOI to contoso.com. GP01 includes a shortcut preference named Shortcut1 that has item-level targeting configured as shown in the following exhibit.

To which computer will Shortcut1 be applied?

NEW QUESTION 69
You have a Group Policy Object (GPO) named GPO1 that contains user settings only.
You plan to apply GPO1 to a global security group named Group1.
You link GP01 to the domain, and you remove all the permissions granted to the Authenticated Users group.
You need to configure permissions for GP01 to meet the following requirements.
* GPO1 must apply only to the users in Group 1.
* The solution must use the principle of least privilege

NEW QUESTION 70
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed.
Server1 contains a virtual machine named VM1 that runs Windows Server.
You need to install the Hyper-V server role on VM1.
Which PowerShell command should you run first? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 71
You have an Azure Active Directory Domain Services (Azure AD DS) domain.
You create a new user named Admin1.
You need Admin1 to deploy custom Group Policy settings to all the computers in the domain. The solution must use the principle of least privilege.
What should you include in the solution? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

NEW QUESTION 72
You deploy a new Active Directory Domain Services (AD DS) forest named contoso.com. The domain contains three domain controllers named DC1, DC2, and DC3.
You rename Default-First-Site-Name as Site1.
You plan to ship DC1, DC2, and DC3 to datacenters in different locations.
You need to configure replication between DC1, DC2, and DC3 to meet the following requirements:
Each domain controller must reside in its own Active Directory site.
The replication schedule between each site must be controlled independently.
Interruptions to replication must be minimized.
Which three actions should you perform in sequence in the Active Directory Sites and Services console? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NEW QUESTION 73
You have an Azure virtual machine named VM1 that runs Windows Server.
You need to ensure that administrators request access to VM1 before establishing a Remote Desktop connection.
What should you configure?

NEW QUESTION 74
You need to meet the technical requirements for VM2.
What should you do?

NEW QUESTION 75
Your network contains an Azure AD Domain Services domain named contoso.com.
You need to configure a password policy for the local user accounts on the Azure virtual machines joined to contoso.com.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 76
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers.
You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1.
Solution: You configure the Try Next Closest Site Group Policy Object (GPO) setting in a GPO that is linked to Site1.
Does this meet the goal?

NEW QUESTION 77
Case Study 3 – ADatum Corporation
Overview
Company Information
ADatum Corporation is a manufacturing company that has a main office in Seattle and two branch offices in Los Angeles and Montreal.
Fabrikam Partnership
ADatum recently partnered with 2 company named Fabrikam, Inc.
Fabrikam is a manufacturing company that has a main office in Boston and a branch office in Orlando.
Both companies intend to collaborate on several joint projects.
Existing Environment
ADatum AD DS Environment
The on-premises network of ADatum contains an Active Directory Domain Services (AD DS) forest named adatum.com.
The forest contains two domains named adatum.com and east.adatum.com and the domain controllers shown in the following table.

Fabrikam AD DS Environment
The on-premises network of Fabrikam contains an AD DS forest named fabrikam.com.
The forest contains two domains named fabrikam.com and south.fabrikam.com.
The fabrikam.com domain contains an organizational unit (OU) named Marketing.
Server Infrastructure
The adatum.com domain contains the servers shown in the following table.

HyperV1 contains the virtual machines shown in the following table.

All the virtual machines on HyperV1 have only the default management tools installed.
SSPace1 contains the Storage Spaces virtual disks shown in the following table.

Azure Resources
ADatum has an Azure subscription that contains an Azure AD tenant. Azure AD Connect is configured to sync the adatum.com forest with Azure AD.
The subscription contains the virtual networks shown in the following table.

The subscription contains the Azure Private DNS zones shown in the following table.

The subscription contains the virtual machines shown in the following table.

All the servers are in a workgroup.
The subscription contains a storage account named storage1 that has a file share named share1.
Requirements
Planned Changes
ADatum plans to implement the following changes:
– Sync Data1 to share1.
– Configure an Azure runbook named Task1.
– Enable Azure AD users to sign in to Server1.
– Create an Azure DNS Private Resolver that has the following configurations:
– Name: Private1
– Region: West US
– Virtual network: VNet1
– Inbound endpoint: SubnetB
– Enable users in the adatum.com domain to access the resources in the south.fabrikam.com domain.
Technical Requirements
ADatum identifies the following technical requirements:
– The data on SSPace1 must be available always.
– DC2 must become the schema master if DC1 fails.
– VM3 must be configured to enable per-folder quotas.
– Trusts must allow access to only the required resources.
– The users in the Marketing OU must have access to storage1.
– Azure Automanage must be used on all supported Azure virtual machines.
– A direct SSH session must be used to manage all the supported virtual machines on HyperV1.
Drag and Drop Question
You need to implement the planned change for Data1.
Which actions should you perform in sequence? To answer, drag the appropriate actions to the correct order. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

NEW QUESTION 78
You have servers that run Windows Server 2022 as shown in the following table.

Server2 contains a .NET app named App1.
You need to establish a WebSocket connection from App1 to the SQL Server instance on Server!. The solution must meet the following requirements:
* Minimize the number of network ports that must be open on the on-premises network firewall.
* Minimize administrative effort.
What should you create first?

NEW QUESTION 79
You have an on-premises server named Server1 that runs Windows Server and has internet connectivity.
You have an Azure subscription.
You need to monitor Server1 by using Azure Monitor.
Which resources should you create in the subscription, and what should you install on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 80
You need to implement an availability solution for DHCP that meets the networking requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.