Pass Juniper JN0-104 exam questions - convert Test Engine to PDF [Q28-Q52]

Pass Juniper JN0-104 exam questions – convert Test Engine to PDF [Q28-Q52]

April 13, 2022 admin 0 Comments

Rate this post

Pass Juniper JN0-104 exam questions – convert Test Engine to PDF

Pass Your JN0-104 Exam Easily – Real JN0-104 Practice Dump Updated Apr 13, 2022

NEW QUESTION 28
You are considering to upgrade from 19.1R1 and want to ensure that only bug fixes are included. Which two software versions should you use in the current situation? Choose Two

19.3R2

19.1R3

19.1R1-S2

19.3R1-S1

Explanation
R release : Maintenance and introduce bug fixes
19.1R1 ==> 19.1R2 introduces only bug fixes 19.1R1 ==> 19.2R2 Introduces new features

NEW QUESTION 29
Which of these is true about the forwarding plane?

It is based on x86 architecture.

It uses ASICs for improved performance.

It maintains routing tables.

It is the intelligence of the platform.

NEW QUESTION 30
Which of these commands can be used to view the configuration of interface ge-0/0/1.0 ?

[edit protocols bgp] user@router# display interfaces ge-0/0/1.0

[edit protocols bgp] user@router# show interfaces ge-0/0/1.0

[edit protocols bgp] user@router# top show interfaces ge-0/0/1.0

NEW QUESTION 31
Which three attributes contribute to the reliability of TCP?
Choose three.

Port numbers

EXP bits

Sequence numbers

Acknowledgements

Timers

NEW QUESTION 32
What is responsible for processing multicast transit traffic?

Control plane

Management plane

PFE

NEW QUESTION 33
Which of these commands can be used to view the best paths stored in the PFE?

show route best-match

show route

show route forwarding-table

show route active-path

NEW QUESTION 34
Which command is used to replace a current configuration?

load replace

load patch

load override

load set

NEW QUESTION 35
You want to temporarily apply a candidate configuration to the active configuration and automatically roll back after 10 minutes In this scenario, which command will accomplish this task?

commit at

commit confirmed

commit check

commit

Explanation
[edit]
user@host# commit confirmed
commit confirmed will be automatically rolled back in 10 minutes unless confirmed commit complete
#commit confirmed will be rolled back in 10 minutes
[edit]
user@host#
https://www.juniper.net/documentation/us/en/software/junos/cli/topics/topic-map/junos-configuration-commit.ht

NEW QUESTION 36
Select the SONET network elements that are used for troubleshooting (Choose three.)

circuit

line

section

path

segment

NEW QUESTION 37
Which keystroke combination will allow you to erase a single word to the left of the cursor?

Ctrl + e

Ctrl + a

Ctrl + w

Ctrl + u

NEW QUESTION 38
Click the Exhibit button.

Referring to the exhibit, which command was issued to generate the output?

show chassis routing-engine

show chassis hardware

show chassis environment

show chassis fpc

NEW QUESTION 39
Referring to the exhibit,

which dynamic routing protocol would be used for this topology?

IGMPv3

OSPFv2

RIPng

RIP

NEW QUESTION 40
Which two platforms are supposed in both physical and virtual form factors? Choose TWO

NFX Series

ACX Series

SRX Series

MX Series

NEW QUESTION 41
How does a Junos device handle exception traffic?

Exception packets are dropped by the Packet Forwarding Engine.

Exception packets are sent to the Routing Engine and are then dropped.

Exception packets are sent to the Routing Engine for processing.

Exception packets are processed by the Packet Forwarding Engine.

NEW QUESTION 42
Which three connection protocols allow you to gather operational information from the Junos device? (Choose three.)

NETCONF

Telnet

XML

JSON

SSH

NEW QUESTION 43
Host A is communicating with Host B through a Layer 2 switch.
What is the highest layer that the switch will inspect the traffic in this scenario?

Data Link

Transport

Network

Session

NEW QUESTION 44
Given the host IP address of 192.168.100.60 and a network mask of 255.255.255.224 (or /27), which address represents the correct network address for the referenced host?

192.168.100.48

192.168.100.16

192.168.100.0

192.168.100.32

NEW QUESTION 45
What is the purpose of a subnet mask?

It is used to identify the total number of bits present in an IP address.

It is used to identify an IP address as private or public.

It is used to identify the network to which an IP address belongs.

It is used to identify the maximum hop count of a subnet.

NEW QUESTION 46
What is the default route preference for OSPF internal?

100

150

NEW QUESTION 47

Referring to the exhibit, which command will change the 172.16.10.1/24 IP address to 172.16.100.1/24 IP address?

copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24

set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24

rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address
172.16.100.1/24

insert interface ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address
172.16.100.1/24

Explanation
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/rename.html

NEW QUESTION 48
What are two valid initial configuration methods supported on Junos devices? (Choose two)

CLI

J-Web

Junoscope

PCMCIA flash card

NEW QUESTION 49
Which of these commands will redistribute static routes into OSPF?

set protocols ospf import static-routes

set routing-options static defaults readvertise

set protocols ospf export static-routes

set routing-options static route 0.0.0.0/0 readvertise

NEW QUESTION 50
Which two interfaces are considered physical interfaces? (Choose two.)

xe-10/2/1

ge-0/0/0

et-3/0/0/0:0.501

et-7/1/4.0

NEW QUESTION 51
Which of these about the Forwarding Table is true?

The forwarding table is stored only on the RE.

The forwarding table stores all known routes.

The forwarding table is stored both on the RE and PFE.

The forwarding table is only stored on the PFE.

NEW QUESTION 52
You issue the request system zeroize command. Which statement is correct in this scenario?

All data files are deleted and all configuration setting are returned to factory defaults.

All data files remain unchanged but all configuration setting are returned to factory defaults.

Disk space is freed by rotating log files and a proposed list of files to delete is presented.

All data files are deleted and the configuration settings remain unchanged.

Loading …

Juniper JN0-104 Exam Syllabus Topics:

Topic	Details
Topic 1	Identify the concepts and functionality of various fundamental elements of networking Connection-oriented vs. connectionless protocols
Topic 2	Interface types and properties Function of routers and switches
Topic 3	Advantages of and use cases for dynamic routing protocols Layer 2 addressing, including address resolution
Topic 4	Unicast reverse-path-forwarding (RPF) Collision domains and broadcast domains
Topic 5	Describe how to configure basic components of a Junos device Network tools, such as ping, traceroute, telnet, SSH, and so on
Topic 6	Policy match criteria, match types, and actions Routing Engine and Packet Forwarding Engine

JN0-104 Real Exam Questions and Answers FREE: https://www.topexamcollection.com/JN0-104-vce-collection.html

JN0-104 Practice Tests

Pass Juniper JN0-104 exam questions – convert Test Engine to PDF [Q28-Q52]
Latest Jul 14, 2022 JN0-104 Brain Dump A Study Guide with Tips & Tricks for passing Exam [Q61-Q75]
Free JN0-104 Exam Files Downloaded Instantly 100% Dumps & Practice Exam [Q122-Q144]

Related Certifications

JN0-223
JN0-349
JN0-363
JN0-250
JN0-682
JN0-104
JN0-649
JN0-214
JN0-252
JN0-212