See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to assign the Project Manager – Professional Services business role to the newly created test user so that the user can perform the professional-services processes required during the Fit-to-Standard workshop.
The required business role is:
Business Role ID: BR_PROJECT_MANAGER_PROF
Business Role Description: Project Manager – Professional Services
Business Scenario Explanation
In the previous task, a new test user was created for demonstrating professional services processes.
That new user now needs the correct project-manager authorization.
Without this business role, the test user will not have access to the project-manager apps, pages, and processes needed for the workshop demonstration.
This task connects the newly created user to the standard professional-services project manager role.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values as required.
The business role ID must be:
BR_PROJECT_MANAGER_PROF
Do not use a similar role or partial match.
Save at the end, otherwise the assignment remains incomplete.
Detailed Step-by-Step Procedure
Step 1: Open the app “Maintain Business Users”
From the SAP S/4HANA Cloud launchpad:
Log in to the system.
Use the app search.
Search for:
Maintain Business Users
Open the app.
Explanation:
This app is used to maintain business users and assign business roles.
Since the new user was created in the previous task, this is the correct app to assign the new role.
Step 2: Search for the newly created Project Manager test user
In Maintain Business Users:
In the filter/search area, enter the user name of the new test user.
The required user name format is:
PM######

Example
If your group number suffix is 0000457, then search for:
PM0000457
Click Go.
Explanation:
You must open the newly created project manager test user, not your own user.
The role assignment in this task belongs to the imported test user created in Task 4.

Step 3: Open the new business user record
From the search results:
Click the user entry with:
User Name = PM######
Open the detail page.
Explanation:
This opens the worker/business user record where the Project Manager role will be assigned.

Step 4: Verify that you are on the correct user
Before editing, confirm the business user details are correct.
Typical expected values are:
User Name = PM######
First Name = Project
Last Name = Manager ######
E-Mail = PM######@dummy.sap.com
Explanation:
This check is important because assigning the role to the wrong user would cause the simulation validation to fail.
Step 5: Switch to Edit mode
On the business user detail page:
Click Edit
Explanation:
Edit mode is required so the role list can be changed.
Step 6: Open the “Assigned Business Roles” tab
Inside the business user record:
Click the tab:
Assigned Business Roles
Explanation:
This tab shows all roles currently assigned to the new test user and is the correct place to add the project manager role.
Step 7: Click Add
In the Assigned Business Roles section:
Click Add
The system opens the popup:
Add Business Roles
Explanation:
This popup is used to search and add standard SAP-delivered business roles to the user.
Step 8: Search for the Project Manager role
In the Add Business Roles popup:
In the filter field for business role ID, enter:
BR_PROJECT_MANAGER_PROF
Click Go
Select:
Project Manager – Professional Services
Business Role ID: BR_PROJECT_MANAGER_PROF
Explanation:
This is the exact standard business role required by the task.
It provides the professional-services project manager access for the test user.


Step 9: Add the role
After selecting the role:
Click OK or Apply
Explanation:
At this point, the role is added to the user in draft mode, but the change is not yet final until saved.
Step 10: Save the business user
Back on the user detail page:
Click Save
Explanation:
This is the final required step.
If you do not save, the role assignment will not be stored and the task will not be completed successfully.

Step 11: Verify the assignment
After saving, confirm that the user now has the role:
Project Manager – Professional Services
BR_PROJECT_MANAGER_PROF
Explanation:
This confirms that the new test user is now properly prepared for later professional-services process demonstrations.
Expected Result
After the task is completed:
the new test user PM###### exists,
the role BR_PROJECT_MANAGER_PROF is assigned,
the user is saved successfully,
the user can later be used as a professional-services project manager in the workshop scenario.

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to create a new migration project for the bank data migration scenario in SAP S/4HANA Cloud Public Edition.
The migration method for this scenario is:
Migrate Data Using Staging Tables
The migration project must be created with the exact values provided in the task.
Business Scenario Explanation
In this scenario, you are responsible for migrating bank master data into SAP S/4HANA Cloud Public Edition.
Because only a few banks need to be loaded, the selected migration approach is:
Migrate Data Using Staging Tables
Before any files can be uploaded or any bank data can be validated and migrated, a migration project must first be created. This project acts as the main container for:
the migration object,
the staging-table upload,
validation,
mapping,
transfer to staging tables,
and the final migration execution.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values shown in the task.
The migration project must be created using:
Migrate Data Using Staging Tables
The migration object must be:
Bank
Save or create the project only after confirming the values are correct.
Required Values
Use the following values exactly as shown in the task image.
Parameter
Data
Name
Bank Data ######
Migration object
Bank
Example
If your suffix is 000013, then the values become:
Name = Bank Data 000013
Migration object = Bank
Detailed Step-by-Step Procedure
Step 1: Open the app “Migrate Your Data”
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Migrate Your Data
or
Migration Projects
Open the app.
Explanation:
This app is the migration cockpit used to create migration projects and load master data and transactional data into the system.
Because the task asks you to create a new migration project, this is the correct starting point.
Step 2: Start creating a new migration project
Inside the migration app:
Click:
Create
When the dropdown appears, select:
Migrate Data Using Staging Tables
Explanation:
This is very important because the business scenario explicitly says that the chosen migration method is Migrate Data Using Staging Tables.
Do not choose:
Migrate Data Directly from SAP System
That would be the wrong migration approach for this task.
Step 3: Enter the migration project name
In the project creation screen, enter:
Name = Bank Data ######
Example
If your suffix is 000013, enter:
Bank Data 000013
Explanation:
This is the name of the migration project and must exactly match the task requirement.
Step 4: Keep the staging-table migration approach
On the project creation screen, confirm the migration approach is:
Migrate Data Using Staging Tables
Explanation:
This ensures the migration project is created with the correct loading approach for later CSV/staging-table processing.
Step 5: Keep the local database connection
When the system asks for database connection, leave the default:
Local SAP S/4HANA Database Schema
Explanation:
In your execution, the local schema was used for the migration project.
This is the expected option for the training scenario.
Step 6: Continue to Migration Objects
Click:
Step 2
or continue to the second step of project creation.
Explanation:
This moves from the general project header information to the migration object selection.
Step 7: Search for the migration object
In the Migration Objects section:
Search for:
Bank
Explanation:
The task explicitly requires the migration object:
Bank
So only that object should be selected.
Step 8: Select the migration object “Bank”
When the object appears:
Select:
Bank
Make sure it appears in the Selected Migration Objects area.
Explanation:
This step links the project specifically to the Bank migration object.
Without selecting the migration object, the migration project would be incomplete.
Step 9: Create the migration project
After confirming:
project name,
migration approach,
database connection,
migration object = Bank,
click:
Create
or the final confirmation button provided by the system
Explanation:
This finalizes the creation of the migration project.
Step 10: Verify the created migration project
After creation, verify that the new project shows:
Project Name = Bank Data ######
Migration Object = Bank
Explanation:
This confirms that the project has been created successfully and is ready for template download, CSV preparation, validation, staging-table transfer, and migration execution.
Expected Result
After this task is completed successfully:
a new migration project exists,
the project name matches the required naming pattern,
the migration approach is staging tables,
the migration object is Bank,
the project is ready for the next migration steps.

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to migrate two bank master records into SAP S/4HANA Cloud Public Edition using the Migrate Data Using Staging Tables approach.
This task is performed inside the migration project created earlier:
Migration Project Name: Bank Data ######
Migration Object: Bank
The bank master data must be entered exactly as provided in the task tables.
Business Scenario Explanation
In this scenario, you are responsible for loading a small number of bank records into the system. Because there are only two banks to migrate, the selected migration method is:
Migrate Data Using Staging Tables
This method requires you to:
open the existing migration project,
download the Bank templates,
populate the required CSV file with the bank data,
upload the files,
validate the data,
transfer the data to staging tables,
complete any required mapping tasks,
migrate the bank instances,
verify the migrated banks in the target app.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the values exactly as shown in the task.
Keep names, spaces, and numbers exactly correct.
During your execution, mappings may be required for:
Country/Region Key
Language Key (ISO)
Regional Code
Bank Key
If regional text values like Pennsylvania or Georgia are rejected, mapping may be needed to:
PA
GA
Example
If the suffix is 000013, the values become:
Bank 1
Bank Country/Region = US
Bank Key = A000013
Bank Name = Bank of A000013
Street = West Chester Pike
House Number = 3999
City = Newtown Square
Postal Code = 19073
Country/Region = US
Language = EN
Location = Pennsylvania
Bank 2
Bank Country/Region = US
Bank Key = Z000013
Bank Name = Bank of Z000013
Street = Lenox Road
House Number = 3580
City = Atlanta
Postal Code = 30326
Country/Region = US
Language = EN
Location = Georgia
Detailed Step-by-Step Procedure
Step 1: Open the app “Migrate Your Data”
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Search for:
Migrate Your Data
or
Migration Projects
Open the app.
Explanation:
This app is the migration cockpit where the project and Bank migration object are maintained.
Step 2: Open the migration project
In the migration projects list:
Search for your project:
Bank Data ######
Open the project.
Example
If your suffix is 000013, open:
Bank Data 000013
Explanation:
This is the migration project created in the previous task and it contains the migration object Bank.

Step 3: Open the Bank migration object
Inside the migration project:
Locate the migration object:
Bank
Open it.
Explanation:
The Bank migration object is where the templates, uploads, mapping tasks, and migration instances are handled.


Step 4: Download the template files
On the Bank migration object screen:
Click:
Download Template
This provides the CSV template files needed for migration.
Explanation:
For the Bank migration object, the main files typically include:
S_BNKA#FreeText_Mandatory.csv
S_SCRIPT_ADRC#FreeText.csv
The mandatory file contains the bank master structure; the second file is optional for international address versions.
Step 5: Populate the mandatory Bank CSV file
Open the mandatory CSV file:
S_BNKA#FreeText_Mandatory.csv
Enter the two bank records exactly as required from the task tables.
Explanation:
This file must contain the bank master data that will be loaded into the staging tables.
The data must match the required values exactly.

Step 6: Use the correct values in the Bank CSV
Populate the mandatory file with the two records.
Bank 1
Bank Country/Region = US
Bank Key = A######
Bank Name = Bank of A######
Street = West Chester Pike
House Number = 3999
City = Newtown Square
Postal Code = 19073
Country/Region = US
Language = EN
Location = Pennsylvania
Bank 2
Bank Country/Region = US
Bank Key = Z######
Bank Name = Bank of Z######
Street = Lenox Road
House Number = 3580
City = Atlanta
Postal Code = 30326
Country/Region = US
Language = EN
Location = Georgia
Explanation:
These values create two bank master records, one beginning with key A###### and the other with key Z######.
Step 7: Keep the optional international address file empty if not needed For the file:
S_SCRIPT_ADRC#FreeText.csv
leave it with header only if no separate international address version data is required.
Explanation:
During your execution, the optional file was not required and the Bank migration still proceeded because only the mandatory Bank Master structure had to be populated.
Step 8: Open Upload Files
In the Bank migration object:
Go to:
Upload Files
Explanation:
This is where the CSV folder is created and the files are uploaded to the migration cockpit.

Step 9: Create a CSV Folder
Click:
Create CSV Folder
Explanation:
When using CSV with staging tables, SAP groups the upload into a CSV folder structure.
Step 10: Upload the CSV files
Upload:
S_BNKA#FreeText_Mandatory.csv
S_SCRIPT_ADRC#FreeText.csv (optional / empty if not used)
Explanation:
The mandatory file is required.
The optional file may remain empty or not provided depending on the migration object’s structure.
Step 11: Validate the data
After upload:
Click:
Validate Data
Explanation:
This checks:
file readability,
required columns,
correct structure,
duplicate keys,
and data consistency.
Step 12: Correct any file or format errors if needed
During execution, common issues included:
wrong file mapping,
UTF-8 / CSV reading problems,
missing mandatory fields,
duplicate key values,
region value mismatches.
Explanation:
You must resolve validation errors before continuing to staging tables.
Examples from your run:
duplicate key values had to be corrected,
file structure mapping had to be adjusted,
CSV encoding had to be corrected.
Step 13: Transfer data to staging tables
After validation is successful, click:
Transfer Data to Staging Tables
Explanation:
This moves the validated CSV data into SAP’s staging tables so the Bank migration object can create migration instances.
Step 14: Go to Mapping Tasks if required
If the system shows mapping tasks, open:
Mapping Tasks
Explanation:
For your run, the following mappings had to be confirmed:
Country/Region Key
Language Key (ISO)
Regional Code
Bank Key
Step 15: Maintain mapping values
If mappings appear, confirm or maintain them as follows:
Country/Region Key
source US → target US
Language Key (ISO)
source EN → target EN
Regional Code
If text values are shown:
source Pennsylvania → target PA
source Georgia → target GA
Bank Key
Confirm the system-generated source values to the correct target values for:
A######
Z######
Explanation:
These mappings are required when the migration object needs target-system value confirmation before posting the records.
Step 16: Confirm the mapping tasks
After maintaining the mappings:
Click:
Confirm
Explanation:
All mapping task statuses should change to Confirmed before running migration again.
Step 17: Open the Bank instances
Return to the Bank migration object and open:
Instances
Explanation:
This screen shows the individual bank records created from the staging-table data.
Step 18: Select the bank instances
Select both bank records.
Expected rows:
US / A######
US / Z######
Explanation:
Both bank records must be selected so they can be migrated into the target system.
Step 19: Click Migrate
Click:
Migrate
Explanation:
This starts the actual creation of bank master records in the target SAP S/4HANA Cloud system.
Step 20: Resolve authorization issue if it appears
During your execution, migration initially failed with:
You are not authorized to create bank data for country/region US
The fix was to assign the additional business role:
Master Data Specialist – Bank Data
SAP_BR_MD_SPECIALIST_BNK
Explanation:
The migration cockpit role alone is not always enough.
Bank creation also requires bank master data authorization.
Step 21: Refresh and check migration status
After migration:
Refresh the screen.
Check the status of both bank instances.
Expected final result:
Success
Success
Explanation:
Both bank rows must finish successfully for the task to be considered complete.
Step 22: Verify in “Manage Banks – Master Data”
Open:
Manage Banks – Master Data
Search for:
US / A######
US / Z######
Explanation:
This is the final business verification step that proves the bank master records were created successfully in the system.
Expected Result
After this task is completed successfully:
both bank records are loaded through staging tables,
all mapping tasks are confirmed,
both migration instances complete successfully,
the two banks are visible in Manage Banks – Master Data.

See Explanation below for all solution
Explanation:
Task 1: Assign the Administrator Business Role to Your User
Objective
The purpose of this task is to assign the standard SAP business role Administrator to your own business user so you can perform the required configuration and administration activities in SAP S/4HANA Cloud.
The required business role is:
Business Role ID: BR_ADMINISTRATOR
Business Role Description: Administrator
For your exercise, you must always replace ###### with the last 6 digits of your group number. In your case, this was done with your own group suffix during execution.

Why this task is required
In SAP S/4HANA Cloud, access to apps and functions is controlled through business roles.
Without the Administrator role, your user may not be able to:
open administration apps,
maintain configuration-related master data,
assign other roles,
proceed with later project tasks.
So this task is the first access-enablement step.
Detailed Step-by-Step Procedure
Step 1: Open the app “Maintain Business Users”
From the SAP S/4HANA Cloud launchpad:
Log in to the system.
Use the search bar or app finder.
Search for:
Maintain Business Users
Open the app.
This app is used to maintain business users and assign or remove business roles.
Step 2: Search for your own user
Inside Maintain Business Users:
In the search/filter area, locate the field for User Name or search criteria.
Enter your own user ID.
Click Go.
For example, in your exercise you used your own SAP Learning user.
You must open your own business user because the Administrator role needs to be assigned to your personal user record.
Step 3: Open your user record
After the search results appear:
Click your user entry in the list.
Open the user details screen.
This takes you to the detailed maintenance page where business roles can be reviewed and assigned.
Step 4: Switch to Edit mode
In the business user detail screen:
Click Edit.
Without entering edit mode, the role assignment list is display-only and cannot be changed.
Step 5: Go to Assigned Business Roles
Inside your business user:
Open the tab:
Assigned Business Roles
Review the currently assigned roles.
This tab shows all business roles already assigned to your user and is the correct place to add new ones.
Step 6: Click Add
In the Assigned Business Roles section:
Click Add.
This opens the dialog:
Add Business Roles
The Add dialog is used to search and select standard SAP-delivered business roles.
Step 7: Search for the Administrator role
In the Add Business Roles popup:
In the field Business Role ID, enter:
BR_ADMINISTRATOR
Click Go.
Select the role:
Administrator
Business Role ID: BR_ADMINISTRATOR
This is the standard Administrator role required by the task.
You must select the exact standard role, not a custom role.
Step 8: Add the role
After selecting BR_ADMINISTRATOR:
Click OK or Apply, depending on the popup behavior.
Confirm that the role is added to the list of assigned business roles.
At this point the role is added to your draft changes, but not yet finally saved.
Step 9: Save the user
Back in the business user detail screen:
Click Save.
This is the final and mandatory step.
If you do not save, the Administrator role remains only in draft and is not actually assigned.
Step 10: Verify the assignment
After saving:
Check the Assigned Business Roles list.
Confirm that the Administrator role appears in the list:
BR_ADMINISTRATOR
Expected Result:
Your user now has the Administrator business role assigned successfully.
What to verify after completion
You should verify the following:
Your user record is saved successfully.
The role Administrator is visible in the assigned roles list.
No draft remains unsaved.
Later administration apps are available to your user.

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to complete the launchpad setup for the custom all-employee role by:
assigning the custom Launchpad Space to the business role,
editing the Launchpad Page,
creating a section titled Self-Services,
adding the required applications as standard preferred square tiles:
Manage My Timesheet
Concur Travel Expense
Business Scenario Explanation
In the earlier tasks, you created:
a custom all-employee business role,
the required business catalog assignments,
a custom launchpad space and page.
This task completes that setup by adding the actual application tiles that end users will see on the launchpad.
The goal is to make it easy for employees to find the relevant self-service applications without searching manually.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values listed in the task.
The section title must be exactly:
Self-Services
The two tiles must be:
Manage My Timesheet
Concur Travel Expense
Save after editing the page.
Prerequisites
Before doing this task, the following should already exist:
custom business role:
Z_EMPLOYEES_ALL_######
assigned business catalogs:
SAP_HCM_BC_EMP_PC
SAP_CON_BC_CTE_ESS_PC
custom launchpad space and page created for the role
page title and description:
General
Detailed Step-by-Step Procedure
Step 1: Open the app “Maintain Business Roles”
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This is the app where the custom all-employee role is maintained. The launchpad space assignment and page navigation are controlled from here.
Step 2: Open the custom all-employee business role
In Maintain Business Roles:
Search for your custom business role:
Z_EMPLOYEES_ALL_######
Open the role.
Example
If your suffix is 000013, the role is:
Z_EMPLOYEES_ALL_000013
Explanation:
You must work in the custom all-employee role because the launchpad space and page belong to this role.
Step 3: Open the Launchpad Spaces tab
Inside the role:
Click:
Launchpad Spaces
Explanation:
This tab shows which launchpad space is assigned to the role.
Step 4: Verify the Launchpad Space is assigned
Check that the assigned space exists.
In your execution, the assigned space followed this pattern:
Z_ALL_EMP_######
Explanation:
The task says to assign the launchpad space to the custom business role.
If the space already appears in the assigned list, then this part is already complete.
If the space is not listed:
Click Add
Create or assign the required custom space
Save the role
Step 5: Open the assigned Launchpad Space
In the assigned launchpad spaces list:
Click the arrow > at the far right of the space row.
Explanation:
This opens Space Details, where the page linked to the space can be accessed.
Step 6: Open the Pages tab
In Space Details:
Click:
Pages
Explanation:
A space can contain one or more pages.
This task requires you to edit the page content.
Step 7: Open the Launchpad Page
In the Pages list:
Open the page row by clicking the arrow > at the far right.
In your run, the page followed this pattern:
Z_ALL_EMP_######
Explanation:
This opens Page Details, where the page content can be edited.
Step 8: Open Page Content
Inside Page Details:
Click the tab:
Page Content
Explanation:
This is the area where sections and application tiles are maintained.
Step 9: Click Edit
On the Page Content screen:
Click Edit
Explanation:
The page must be in edit mode before you can create sections or add app tiles.
Step 10: Enter the section title
In the section title field, enter exactly:
Self-Services
Explanation:
This creates the section in which the required employee self-service app tiles will be placed.
The title must match the task exactly.
Step 11: Add the tile “Concur Travel Expense”
On the right side of the page content screen, in the list of apps derived from the assigned catalogs:
Find:
Concur Travel Expense
Click:
Add
Explanation:
This adds the Concur employee self-service app tile into the Self-Services section.
Step 12: Add the tile “Manage My Timesheet”
Still on the right side app list:
Find:
Manage My Timesheet
Click:
Add
Explanation:
This adds the timesheet app tile into the same Self-Services section.
Step 13: Verify both tiles are visible in the section
After adding both apps, confirm that the page content now shows:
Concur Travel Expense
Manage My Timesheet
under the section:
Self-Services
Explanation:
This confirms the tiles were placed correctly on the page.
Step 14: Save the page
Click:
Save
Explanation:
This finalizes the page changes.
If you do not save, the tiles and section will not be retained.
Step 15: Verify the role is assigned to your business user
To verify the page and tiles from the home screen, make sure the custom all-employee role is assigned to your own business user.
Open:
Maintain Business Users
Then:
Open your own user
Open Assigned Business Roles
Confirm the role is assigned:
Z_EMPLOYEES_ALL_######
Save if needed
Explanation:
Without role assignment, the launchpad space and page may not appear on the homepage for your user.
Step 16: Refresh the homepage
Go back to Home.
Then:
Refresh the browser or reload the session
Open the page/tab:
General
Explanation:
This ensures the launchpad updates and shows the newly added content.
Step 17: Verify the result on the homepage
On the General page, verify that you can see:
section title:
Self-Services
tile:
Concur Travel Expense
tile:
Manage My Timesheet
Explanation:
This is the final proof that the task was completed successfully.
Expected Result
After this task is completed successfully:
the custom launchpad space is assigned to the business role,
the page contains a section named Self-Services,
the page shows the tiles:
Concur Travel Expense
Manage My Timesheet
the tiles are visible on the launchpad homepage under the General page.

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to create a test user in SAP S/4HANA Cloud for demonstrating professional services business processes to project managers during a Fit-to-Standard workshop.
This task is completed by importing:
worker data
work agreement data
The import must use the exact values provided in the task.
Business Scenario Explanation
In this scenario, you need a test user that represents a Project Manager.
This user is needed so that project-management-related professional services processes can later be demonstrated in the system.
Instead of creating every record manually, SAP asks you to use the import process.
This is faster and also ensures the worker and agreement data are loaded in the correct structure.

Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the values exactly as provided.
Do not change spaces, punctuation, or capitalization unless the task explicitly tells you to.
A wrong value, extra space, or missing number can cause task validation failure.

If your suffix is 000013, then the values become:
Worker ID = 1000013
User Name = PM000013
First Name = Project
Last Name = Manager 000013
Email = [email protected]
Step 1: Open the app used for importing users/workers
From the SAP S/4HANA Cloud launchpad:
Log in to the system.
Open the relevant import app used in your simulation for importing worker and work agreement data.
Start creation of a new import.
Explanation:
This task is not done by manual user creation only.
The scenario specifically says to create the new business user by importing the new user’s data.
The import will load the basic worker and work agreement records that are required before the business user is fully usable.
Step 2: Enter the import name
When creating the import:
In the field Import Name, enter:
Project Manager Test User ######
Replace ###### with your own 6-digit group suffix.
Example
For suffix 000013, enter:
Project Manager Test User 000013
Explanation:
The import name identifies your import package and should be entered exactly as required by the task.
Step 3: Prepare the worker data
In the worker import structure, enter these values:
Worker ID = 1######
User Name = PM######
Worker Type = BUP003
First Name = Project
Last Name = Manager ######
Email = PM######@dummy.sap.com
Language = EN
Company Code = 1010
Cost Center = 10101501
Example for 000013
Worker ID = 1000013
User Name = PM000013
Last Name = Manager 000013
Email = [email protected]
Explanation:
These values define the person as a project manager test worker and connect the worker to:
the company code,
the cost center,
the default language,
and the worker type required by the scenario.
Step 4: Prepare the work agreement data
In the work agreement import structure, enter:
Start Date = today’s date in YYYYMMDD format
End Date = 99991231
Example
If today’s date is March 30, 2026:
Start Date = 20260330
End Date = 99991231
Explanation:
The end date 99991231 is used to indicate an open-ended validity.
This is common in SAP for a record that should remain valid indefinitely.
Step 5: Upload or enter the import data
Depending on the app behavior in your exercise:
Upload the prepared import file or
Enter the values into the import structure manually if the system provides inline entry.
Explanation:
The business scenario says the business user must be created by importing worker and work agreement data.
This means the relevant master data must be loaded into the system first before the user is fully available.
Step 6: Start the import
After all values are entered:
Validate the data if the system provides a validation option.
Start the import.
Explanation:
Validation checks whether:
required fields are filled,
date formats are correct,
codes like BUP003, 1010, and 10101501 are valid,
and the import structure is complete.
Step 7: Wait for the import to complete
Monitor the import process.
Wait until the import shows success or completed status.
Explanation:
Only after the import is complete will the worker and work agreement records exist in the system and be usable for further user setup and role assignment.
Step 8: Verify the imported worker/business user
After the import finishes:
Open the relevant business user / worker maintenance app.
Search using:
Worker ID
or User Name
Confirm that the imported user exists.
Explanation:
This step ensures the imported data was actually created and is available for later process demonstrations.
Expected Result
After the import is completed successfully:
a new test worker/user exists in the system,
the worker has the required professional-services identity,
the work agreement is valid,
the user can be used in later project manager demonstrations.

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to create a Communication System for the integration scenario Bank Integration with File Interface (1EG).
This communication system will later be used in the communication arrangement and will reference the communication user created in the previous task.
Business Scenario Explanation
In this scenario, you are setting up:
Bank Integration with File Interface (1EG)
In SAP S/4HANA Cloud, the technical setup typically requires:
a Communication User
a Communication System
a Communication Arrangement
In Task 13, you created the communication user.
In Task 14, you now create the communication system and link that previously created communication user for inbound communication.
The communication system represents the external or technical integration partner definition used in the scenario.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values shown in the task.
Do not change capitalization, underscores, or spacing.
The communication user assigned in this task must be the one created in the previous step:
1EG_COMM_USER_######
Required Values
Use the following values exactly as shown in the task image.

Example
If your suffix is 000013, then the values become:
System ID = 1EG_SYSTEM_000013
System Name = Bank Integration with File Interface
Host Name = DUMMY
Inbound Communication User = 1EG_COMM_USER_000013
Step 1: Open the app “Communication Systems”
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the search bar or app finder.
Search for:
Communication Systems
Open the app.
Explanation:
This app is used to create and maintain technical communication systems for integration scenarios.
Because the task explicitly asks to create a Communication System, this is the correct app.
Step 2: Start creating a new Communication System
Inside the Communication Systems app:
Click:
New
Explanation:
This starts the creation of a new communication system record.
Step 3: Enter the System ID
In the communication system creation screen, enter:
System ID = 1EG_SYSTEM_######
Example
If your suffix is 000013, enter:
1EG_SYSTEM_000013
Explanation:
This is the technical ID of the communication system.
It must exactly match the task requirement.
Step 4: Enter the System Name
In the System Name field, enter exactly:
Bank Integration with File Interface
Explanation:
This is the descriptive name of the communication system and must be entered exactly as provided.
Step 5: Enter the Host Name
In the Host Name field, enter exactly:
DUMMY
Explanation:
For this simulation, the host is not a real productive endpoint.
The task explicitly requires the placeholder value DUMMY.
Step 6: Maintain the inbound communication user
Locate the section for:
Users for Inbound Communication
Then:
Click Add or select the entry field/value help
Choose the communication user created in the previous task:
1EG_COMM_USER_######
Example
If your suffix is 000013, select:
1EG_COMM_USER_000013
Explanation:
This is a critical link between the communication user and the communication system.
Without assigning the previously created communication user, the communication system setup is incomplete.
Step 7: Verify the inbound user assignment
After adding the inbound communication user, confirm that the selected user is:
1EG_COMM_USER_######
Explanation:
This confirms that the system will use the correct technical user for inbound communication in the later communication arrangement.
Step 8: Review all entered values
Before saving, check the following:
System ID = 1EG_SYSTEM_######
System Name = Bank Integration with File Interface
Host Name = DUMMY
Users for Inbound Communication = 1EG_COMM_USER_######
Explanation:
This review helps avoid validation issues caused by incorrect naming, missing underscores, or selecting the wrong communication user.
Step 9: Save the Communication System
Click:
Save
Explanation:
This finalizes the creation of the communication system.
Without saving, the communication system will not exist for the next task.
Step 10: Verify the saved Communication System
After saving, confirm that the communication system exists and displays the correct values:
1EG_SYSTEM_######
Bank Integration with File Interface
Host = DUMMY
inbound user = 1EG_COMM_USER_######
Explanation:
This confirms the system is successfully created and ready for the communication arrangement setup in the next step.
Expected Result
After this task is completed successfully:
the communication system exists,
the system ID matches the required naming pattern,
the system name is correct,
the host name is DUMMY,
the previously created communication user is assigned for inbound communication, the system is saved successfully.

See Explanation below for all solution
Explanation:
Task 3: Assign the HR Administrator Business Role to Your User
Objective
The purpose of this task is to assign the HR Administrator business role to your own business user so you can continue the worker, work agreement, and business user setup activities required for the professional services scenario.
The required business role is:
Business Role ID: BR_ADMINISTRATOR_HRINFO
Business Role Description: Administrator – HR Info
Task 3: Assign the HR Administrator Business Role to Your User
Objective
The purpose of this task is to assign the HR Administrator business role to your own business user so you can continue the worker, work agreement, and business user setup activities required for the professional services scenario.
The required business role is:
Business Role ID: BR_ADMINISTRATOR_HRINFO
Business Role Description: Administrator – HR Info
Step 1: Open the app “Maintain Business Users”
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search or launchpad search.
Search for:
Maintain Business Users
Open the app.
Explanation:
This app is used to maintain user master data and assign business roles.
All business role assignments for your own user are done here.
Step 2: Search for your own user
In Maintain Business Users:
In the filter/search area, enter your own user name or user ID.
Click Go.
Explanation:
You need to open your own user because the HR Administrator role must be assigned to your own account before continuing the simulation.
Step 3: Open your user record
After the search results appear:
Click your own user in the result list.
Open the detail page.
Explanation:
This opens the business user detail screen where all assigned roles can be reviewed and maintained.
Step 4: Switch to Edit mode
On the user detail page:
Click Edit.
Explanation:
Edit mode is required before you can add or remove business roles.
Without edit mode, the Assigned Business Roles tab is display-only.

Step 5: Open the “Assigned Business Roles” tab
Inside your user record:
Click the tab:
Assigned Business Roles
Explanation:
This tab lists all current roles assigned to your user and is the correct place to add BR_ADMINISTRATOR_HRINFO.

Step 6: Click “Add”
In the Assigned Business Roles section:
Click Add
This opens the dialog:
Add Business Roles
Explanation:
This popup allows you to search for standard SAP business roles by ID or description.
Step 7: Search for the HR Administrator role
In the Add Business Roles popup:
In Business Role ID, enter:
BR_ADMINISTRATOR_HRINFO
Click Go
Select the role:
Administrator – HR Info
Business Role ID: BR_ADMINISTRATOR_HRINFO
Explanation:
This is the exact role required by the task.
It gives you the workforce / HR information administration permissions needed for the later simulation steps.
Step 8: Add the role to the user
After selecting the role:
Click OK or Apply
The role should now appear in your assigned roles list.
Explanation:
At this stage, the role is added to the user in draft mode, but it is not yet permanently stored until you save.

Step 9: Save the business user
Back on the business user detail page:
Click Save
Explanation:
Saving is mandatory.
If you do not save, the role assignment remains incomplete and later tasks may fail because your user will not actually have the HR Administrator authorization.
Step 10: Verify the role assignment
After saving, verify that the role appears in the assigned roles list:
BR_ADMINISTRATOR_HRINFO
Administrator – HR Info
Explanation:
This is your proof that the task is complete.
You should see the HR role together with your other assigned roles.
Expected Result
After completing this task successfully:
your user has the HR Administrator role assigned,
the role appears in Assigned Business Roles,
the user is saved successfully,
later worker/business-user creation steps can be performed.
Why this role matters
The role BR_ADMINISTRATOR_HRINFO is required because the scenario involves:
worker information,
work agreement information,
user creation for workshop demonstration,
HR-related administration steps.
In SAP S/4HANA Cloud, access is always role-based, so assigning this role is an authorization prerequisite for later tasks.