Free Sales Ending Soon - 100% Valid D-PE-OE-01 Exam Dumps with 420 Questions [Q223-Q243]

Free Sales Ending Soon – 100% Valid D-PE-OE-01 Exam Dumps with 420 Questions [Q223-Q243]

November 8, 2026 admin 0 Comments

Rate this post

Free Sales Ending Soon – 100% Valid D-PE-OE-01 Exam Dumps with 420 Questions

Verified D-PE-OE-01 dumps Q&As on your EMC Servers Exam Questions Certain Success!

EMC D-PE-OE-01 Exam Syllabus Topics:

Section	Objectives
Monitoring, Maintenance, and Troubleshooting	– System health monitoring and alerts – Basic troubleshooting of hardware and firmware issues
iDRAC and Lifecycle Controller Management	– iDRAC remote management configuration and usage – Lifecycle Controller provisioning and updates
Storage and RAID Configuration	– Storage management and disk troubleshooting – RAID concepts and configuration on PowerEdge systems
System Installation and Initial Configuration	– BIOS/UEFI configuration basics – Initial server setup and deployment workflow
PowerEdge Server Architecture and Components	– Server hardware components overview (CPU, memory, storage, networking) – PowerEdge system lifecycle concepts

Q223. A technician in Portland, Oregon has been asked to update the firmware on a server in Omaha, Nebrask a. They will use an NFS server also located in Nebraska for serving patches that have been vetted by their security teams.
What two pieces of information does the technician need in order to access the NFS patch server from the Lifecycle Controller or iDRAC?(Choose two.)

Username and password

CHAP authentication credentials

IP address or hostname

Share name

Q224. A technician tries to power on a server but nothing happens when they press the power button. The status LEDs on both PSUs are green. The technician is able to connect to the iDRAC to review the System Event Logs and discovers that PSU2 has failed.

Reboot the server, Reset the NVRAM

Reboot the server, Test one PSU at a time

Cycle the AC power, Test one PSU at a time

Cycle the AC power, Reset the NVRAM

Q225. A technician needs to configure a server to PXE boot a server setup image with the BIOS in UEFI mode.
What action is required to enable this function?

Boot to Ctrl+S and configure the NIC for PXE Device1

From the iDRAC web interface, select Network Settings, and enable PXE Device1

Navigate to Boot Options Settings and set PXE Device1 as first option

Navigate to Network Settings, PXE Device1 Settings, and configure IP

Q226. A Dell PowerEdge server is experiencing intermittent hardware alerts, and the operating system is occasionally unresponsive. An administrator needs to diagnose and troubleshoot the hardware issue efficiently. Which three tools can be used to troubleshoot hardware issues on a Dell PowerEdge server?

Operating system application logs

LiveOptics

OME

iDRAC

Lifecycle Controller diagnostics

Isolating hardware faults on Dell PowerEdge servers requires leveraging specialized infrastructure tools designed to collect and parse low-level component telemetry. The Integrated Dell Remote Access Controller (iDRAC) provides an independent, out-of-band management plane that monitors component health status continuously and records historical errors within the localized System Event Log (SEL). For hardware-level diagnostics executed outside the operating system workspace, the Lifecycle Controller (LCC) diagnostics offer embedded, pre-boot UEFI test suites capable of performing exhaustive stress tests on the processor, physical memory blocks, and storage backplanes. At an infrastructure-wide level, OpenManage Enterprise (OME) acts as a centralized console that aggregates hardware alerts, evaluates firmware compliance baselines, and monitors structural events across multiple server nodes simultaneously. Together, these three solutions provide the dedicated out-of-band monitoring and localized diagnostics necessary to resolve intermittent hardware anomalies. Study Guide References: Troubleshooting; Dell OpenManage Systems Management Portfolio; Pre-boot Diagnostics and iDRAC Telemetry.

Q227. Which mobile devices are supported by Quick Sync in 13G Dell EMC PowerEdge servers?

Android devices only

iOS and Android devices only

iOS devices only

iOS, Android, and Windows Phone devices

Q228. A technician needs to add a device to SupportAssist for Servers. Policy requires that NO additional software be installed on the server OS.
What information is required to add the device?

Username, Password, and IP address or hostname for the server OS

Username, Password, and IP address or hostname for the iDRAC

Username, Password, and IP address for Dell TechDirect

Username, Password, and IP address for OpenManage Server Administrator

Q229. A server has a dead system board that a technician must replace. After replacing the new system board the technician finds that the user did not back up the server profile, although they did configure the Parts Replacement policy to restore the configuration and firmware revisions for any replaced parts.
After powering on the server with the new system board, the Easy Restore feature displays a window asking if the Easy restore configuration needs to be restored to the system board.
As the Parts Replacement policy had already been configured, the technician selects YES at the Easy Restore screen knowing that the parts Replacement policy will restore the remaining configurations. After powering on the server, the technician then finds that the parts not covered by Easy Restores have not been reconfigured.
What caused the reconfiguration process to stop?

The technician did not back up the server profile upon arrival and before installing the new system board

Configuration data used by the Parts Replacement policy was stored in the Lifecycle Controller on the original system board

The technician forgot to move the vFlash SD card from the old system board to the new system board

Easy Restore overrides the Parts Replacement policy

Q230. What is the purpose of the ePSA on a Dell EMC PowerEdge server?

System diagnostics while the operating system is running

External PowerEdge support assist

Centralized PowerEdge support assist

System diagnostics before starting the operating system

Q231. Refer to the exhibit.

A technician is testing basic SMTP alerts on an iDRAC for a server. The test SMTP alerts fail with the message shown. The technician can ping the hostname of the SMTP server from their workstation. Which two actions should the technician take to fix the issue?(Choose two.)

Verify SMTP port settings on the iDRAC

Use the IP address of the SMTP server

Enable the SMTP Client service on the iDRAC

Add iDRAC hostname to the SMTP server hosts file

Q232. Which two models are 16th generation PowerEdge rack servers? (Select 2)

R650

MX760C

R760

C6620

XE9680

Identifying 16th Generation PowerEdge Rack Servers
Server Portfolio and Features (10%)
Define chassis form factors and numbering nomenclature
Identify server features and specifications
Position the server in the market landscape
Understanding Dell PowerEdge Server Generations and Models
Dell PowerEdge servers are categorized by generation (denoted as “G”) and model numbers. The16th Generation (16G) represents the latest series of Dell servers as of 2023, featuring the newesttechnologies and enhancements.
Evaluation of Options:
Option A: R650
The PowerEdge R650 is a 15th Generation (15G) server.
Conclusion: Not a 16G server.
Option B: MX760C
The PowerEdge MX760c is a compute sled for the Dell PowerEdge MX7000 modular chassis.
Generation: It is part of the 16th Generation, but it is a modular blade server, not a rack server.
Conclusion: Since the question asks for rack servers, this may not be the best fit.
Option C: R760
The PowerEdge R760 is a 16th Generation rack server.
Features:
2U rack form factor
Supports latest Intel Xeon Scalable processors
Enhanced performance and scalability
Conclusion: Correct Answer.
Option D: C6620
The PowerEdge C6620 is a 15th Generation server designed for high-density compute environments.
Conclusion: Not a 16G server.
Option E: XE9680
The PowerEdge XE9680 is a 16th Generation rack server designed for extreme performance,particularly for AI and HPC workloads.
Features:
Supports up to eight GPUs
High-performance computing capabilities
Conclusion: Correct Answer.
Additional Notes:
Rack Servers vs. Modular Servers:
Rack Servers: Standalone servers that mount directly into standard server racks (e.g., R-series, XE-series).
Modular Servers: Compute modules that fit into a shared chassis (e.g., MX-series). While they can be mounted in racks, they are not considered standalone rack servers.
Dell Operate
Reference: Server Portfolio and Features (10%)
Define chassis form factors and numbering nomenclature: Understanding model numbers helps identify the server generation.
Identify server features and specifications: Recognizing the characteristics of 16G servers.
Position the server in the market landscape: Knowing which servers are current and their intendedworkloads.
Conclusion:
The PowerEdge R760 and XE9680 are both 16th Generation rack servers. They represent the latest in Dell’s server technology and are designed to meet modern data center needs.

Q233. Which component of the Dell EMC PowerEdge server provides system information, status, and error messages to indicate when the system is operating correctly, or when the system needs attention?

RACADM

Front Panel LCD

BIOS

UEFI

Q234. A system board has been replaced on a Dell PowerEdge 16G server. What data can Easy Restore recover?

PERC configuration

Service Tag

Lifecycle controller log

HBAconfiguration

Replacing the system board (motherboard) on a Dell PowerEdge 16G server represents a major hardware intervention that replaces the central component hosting vital physical identity data. To simplify this hardware replacement workflow, Dell architectures feature an automated recovery mechanism known as Easy Restore.
This technology relies on a localized, non-volatile backup flash container embedded within the server’s front control panel assembly. When the server powers on following a system board replacement, the Lifecycle Controller detects a blank motherboard and queries the persistent front panel chip. Easy Restore automatically recovers the server’s official Service Tag, which is critical for entitlement verifications, license tracking, and automated asset management. Additionally, it restores system configuration settings and embedded system licenses to the new board. However, it does not recover operating data or external component-specific variables like the PERC virtual disk layout or standalone HBA channel maps, which remain stored on the physical media or controllers. Study Guide References: Server Maintenance; Motherboard Replacement Procedures; Easy Restore Subsystems.

Q235. Which tool allows an administrator to remotely back up a PowerEdge server configuration to streamline server deployments?

OME

OMSA

iDRAC

Virtual console

Q236. Support has requested a SupportAssist Collection to troubleshoot memory Issues with a PowerEdge R770 server. The server is in a co-location data center with limited hours of onsite access. Which three locations are supported to export a SupportAssist Collection for gathering a full health check on a PowerEdge server?

Local Storage

CIFS Share

SAN Storage

S3 Storage

NFS Storage

The Integrated Dell Remote Access Controller (iDRAC) features embedded SupportAssist capabilities that allow administrative users to generate and export diagnostic collections containing hardware telemetry, system logs, and OS dump files independent of host execution. When exporting a SupportAssist Collection to diagnose memory sub-system anomalies without physical data center access, the out-of-band management controller supports specific target destinations. The three native file system and network repository mount types supported for immediate file transfer are Local Storage, a CIFS Share, and an NFS Storage mount.
Selecting Local Storage targets a locally attached USB device or internal vFlash media partition. Networked configurations allow the iDRAC to mount remote network repositories dynamically by utilizing either the Common Internet File System (CIFS) protocol or the Network File System (NFS) daemon. Conversely, direct block-level storage networks such as SAN Storage and unmanaged object storage buckets like S3 are not supported as native inline endpoints within the core firmware export utility. Verifying protocol syntax and directory access limits on the target share ensures successful diagnostic parsing.
Study Guide References: Troubleshooting; SupportAssist Collections; Out-of-Band Remote Diagnostics.

Q237. When does a customer require the Service Tag of the Dell EMC PowerEdge server?

First time logging in to iDRAC

First time accessing the BIOS

Activating the OS

Obtaining warranty information

Q238. A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber.
What should they do to take corrective action upon checking the System Event log?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q239. Which tool provides automated Dell support case creation?

SupportAssist Collector

OpenManage Case Creator

OpenManage Server Administrator

SupportAssist for IDRAC / Enterprise systems

Q240. A system administrator needs to install OpenManage Server Administrator on 200 servers.
What is the quickest way to meet this requirement?

Use the Lifecycle Controller to install OpenManage Server Administrator on each server.

Install OME and push OpenManage Server Administrator to all 200 servers.

Use Microsoft utilities to automate the deployment of OpenManage Server Administrator.

Download OpenManage Server Administrator from Dell.com and install on each server.

Q241. A customer is attempting to install Windows Server 2022 on a Dell PowerEdge R740. However, Windows Server 2022 is not listed in the Available Operating Systems list in the Lifecycle Controller > OS Deployment Wizard.
How can the customer add Windows Server 2022 to the list?

Update OS driver pack

Change installation source

Change boot mode to UEFI

Update BIOS

Q242. You are deploying an OS on a new Dell PowerEdge R760 at a dark-site data center. There is no management network for iDRAC, and you need to configure IDRAC using virtual media. What must you do in order to access the web interface to use the virtual media?

Connect using OpenManage Mobile

Enable PXE boot in BIOS

Connect using iDRAC direct

Update the iDRAC firmware using Lifecycle Controller

In a secure, dark-site data center environment completely lacking local management network infrastructure, traditional remote out-of-band access to the Integrated Dell Remote Access Controller (iDRAC) web user interface is unavailable. To circumvent this constraint and establish a localized, direct management session for operating system deployment, engineers utilize the integrated iDRAC Direct feature. By physically connecting a client workstation via a standard USB cable to the designated iDRAC Direct port located on the front panel of the PowerEdge R760, the management subsystem automatically provisions an isolated, point-to- point virtual network link. This connection automatically maps a link-local IP address configuration to the host controller, enabling the technician to launch a local web browser and securely log into the graphical user interface. From this session, the administrator gains access to the full suite of infrastructure deployment utilities, including the Virtual Media framework. This allows a remote operating system installation ISO image to be mapped directly to the server as a bootable virtual device, enabling successful bare-metal OS initialization without requiring external switches or routers.
Study Guide References: Server Deployment; iDRAC Direct Connectivity; Virtual Media Provisioning.

Q243. A server has two 1100w power supplies. The system needs to enable or disable power supplies dynamically depending on power needs. Power Supply 2 needs to be main power supply.
Which two settings should the technician change?(Choose two.)

Set Default Power Supply to PSU 2

Enable Hot Spare for power supplies

Set Primary Power Supply to PSU 2

Set Power Cap to 1100w for the system

Enable Power Factor Correction

Loading …