2022 Updated Verified Pass NSE5_FMG-7.0 Exam - Real Questions & Answers [Q19-Q38]

2022 Updated Verified Pass NSE5_FMG-7.0 Exam – Real Questions & Answers [Q19-Q38]

December 18, 2022 admin 0 Comments

5/5 - (3 votes)

2022 Updated Verified Pass NSE5_FMG-7.0 Exam – Real Questions and Answers

Dumps Moneyack Guarantee – NSE5_FMG-7.0 Dumps Approved Dumps

NEW QUESTION 19
What does the diagnose dvm check-integrity command do? (Choose two.)

Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM
syntax

Verifies and corrects unregistered, registered, and deleted device states

Verifies and corrects database schemas in all object tables

Verifies and corrects duplicate VDOM entries

6.2 Study Guide page 305 verify and correct parts of the device manager databases, including: – inconsistent device-to-group and group-to-ADOM memberships – unregistered, registered, and deleted device states – device lock statuses – duplicate VDOM entries

NEW QUESTION 20
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

FortiManager_6.4_Study_Guide-Online – page 346
FortiManager HA doesn’t support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device

NEW QUESTION 21
View the following exhibit:

How will FortiManager try to get updates for antivirus and IPS?

From the list of configured override servers with ability to fall back to public FDN servers

From the configured override server list only

From the default server fdsl.fortinet.com

From public FDNI server with highest index number only

NEW QUESTION 22
Which two items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

NEW QUESTION 23
Which two items are included in the FortiManager backup? (Choose two.)

FortiGuard database

Global database

Logs

All devices

NEW QUESTION 24
Refer to the exhibit.

An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?

It allows FortiGate to unset central management settings.

It allows FortiGate to reboot and recover the previous configuration from its configuration file.

It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.

It allows FortiGate to reboot and restore a previously working firmware image.

NEW QUESTION 25
An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

Even if a user entered the correct userid/password, the FMG denies access if a user is logging in from an untrusted source IP subnets.

NEW QUESTION 26
Refer to the exhibits.
Exhibit one.

Exhibit two.

An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?

The DNS addresses in the default system settings are the same as the Training system template

The Training system template has other default settings

The ADOM is locked by another administrator

The Training system template does not have assigned devices

NEW QUESTION 27
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the
managed FortiGate.
In which database will the configuration be saved?

Device-level database

Revision history database

ADOM-level database

Configuration-level database

https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942

NEW QUESTION 28
What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

NEW QUESTION 29
Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.)

When you configure MEA, you must open TCP or UDP port 540.

You must open the ports to the Fortinet registry

You must create a MEA special policy on FortiManager using the super user profile

The administrator must have the super user profile.

NEW QUESTION 30
View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

NEW QUESTION 31
View the following exhibit:

An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?

port1 on FortiGate and WAN on FortiManager

port1 on both FortiGate and FortiManager

WAN zone on FortiGate and WAN zone on FortiManager

WAN zone on FortiGate and WAN interface on FortiManager

NEW QUESTION 32
Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

NEW QUESTION 33
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

FortiManager 6.2 Study guide page 350

NEW QUESTION 34
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)

Managed gateways are devices managed by FortiManager in the same ADOM

External gateways are third-party VPN gateway devices only

Protected subnets are the subnets behind the device that you don’t want to allow access to over the IPsec VPN

Managed devices in other ADOMs must be treated as external gateways

NEW QUESTION 35
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running
configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

NEW QUESTION 36
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

NEW QUESTION 37
What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

NEW QUESTION 38
Refer to the exhibit.

According to the error message why is FortiManager failing to add the FortiAnalyzer device?

The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager

The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface

The administrator must use the Add Model Device section and discover the FortiAnaJyzer device

The administrator must use the correct user name and password of the FortiAnalyzer device

Loading …

Fortinet NSE5_FMG-7.0 Exam Syllabus Topics:

Topic	Details
Topic 1	Identify ADOM revisions and database versions Implement and troubleshoot FortiManager HA
Topic 2	Use the global ADOM to envelop policy packages Perform initial configuration
Topic 3	Troubleshoot policy and object management Install configuration changes using scripts
Topic 4	Perform the import and installation methods Diagnose issues using the revision history

Updated PDF (New 2022) Actual Fortinet NSE5_FMG-7.0 Exam Questions: https://www.topexamcollection.com/NSE5_FMG-7.0-vce-collection.html

NSE5_FMG-7.0 Practice Tests

2022 Updated Verified Pass NSE5_FMG-7.0 Exam – Real Questions & Answers [Q19-Q38]

Related Certifications

NSE6_FWF-6.4
NSE5_FMG-7.2
NSE5_FCT-7.0
NSE5_FMG-7.0
NSE7_EFW-7.0
NSE6_FWB-6.1
NSE6_FSW-7.2
NSE4_FGT-6.4
NSE6_FWB-6.4
NSE6_FAC-6.1