Actual 1Z0-1032-21 Exam Recently Updated Questions with Free Demo [Q25-Q39] : Top Exam Collection : http://blog.topexamcollection.com

NR. 25 What steps should you perform to create conditional logic that uses Entry Tracking variables to control the path an enactment will follow?

Create a Standard Filter Definition, configure a Data Switch, and then create a Program Entry Variable Filter Definition.

Create the Entry Tracking variable, configure how to populate the value, and then configure a Data Switch using the Filter with program variables option.

Create the Entry Tracking variable, configure how to populate the value, and then code an IF/ELSE RPL statement in the campaign.

Create the Entry Tracking variable, configure how to populate the value, and then configure an Entry Tracking Variable element that uses conditions.

NR. 26 Before moving a campaign to production you need to test whetherthe links are working properly.
What functionality should you use in Responsys?

In the Testing section of a campaign Workbook, there is a Test links button that can automate this process.

Using RPL, use the clickthrough() method to iterate throughthe associated link table and test that they do not retrieve 404 errors.

In Program, you can use the Test tab because it will display any issues with links according to a campaign.

You should test all links manually.

NR. 27 When you add a Conversion Tracking Tag to a Conversion Acknowledgement page, each time a visitor completes a transaction, conversion credit will be attributed to the sourcing campaign by default.
Which name-value pair should you append to the Conversion Tracking Tag to clear the cookie in order to eliminate potential duplicate reporting?

action=last

tracking-once

tracking=first

action=single

action=once

NR. 28 Your new Responsys customer wants to begin sending email campaigns.
Which three practices should they employee for their IP address warm-up process? (Choosethree.)

Test out a new re-engagement email campaign by sending emails to lapsed or nonengaged subscribers.

Send carefully planned content to highly engaged recipients.

Minimize complaints and bounces to establish a good reputation with each ISP.

Establish volume levels going through your major ISPs as quickly as possible so you can begin reaching your subscribers without suffering declines in response rates.

Establish an initial reputation with each major ISP by demonstrating that you are sending to valid email addresses with very few complaints or hard bounces.

NR. 29 You want to accesscart and browse abandonment events on your ecommerce website and launch personalized retargeting marketing programs to your known users.
How can you use Rapid Retargeter to capture and expose the events in Responsys in order to accomplish this?

Passthe event data into a Responsys supplemental table near real time with an API call. Backend tables are then automatically updated, so you can use Filter Designer for targeting.

Write the event data into external tables. Batch upload the data into a Responsys supplemental table via Connect every hour and then use SQL to pull data for personalization.

Capture the events and use an API to write them into profile extension tables in the client’s Responsys account and then use SQL to pull data for personalization.

After your website is correctly tagged, use the Interaction Events to enter your contacts into a Program and pass key visitor data as Program Entry Variables.

NR. 30 What three actions must you take to set up your new IP fordeliverability success with your major ISPs?
(Wählen Sie drei aus.)

Do everything possible to remove lapsed, bounced, or old email addresses to increase the possibility of getting your emails into the inbox.

Set up a backup IP address so you will get through to the inbox even if you are blocked by an ISP.

Automate the daily delivery of Insight Deliverability reports for your warm-up campaigns, especially the Feedback Loop reports to check on true spam complaint rates.

Ensure that your warm-up audiencelists consist of recently opted-in, opened/clicked within the last few months, or are known brand advocates.

NR. 31 You are tasked with creating a new campaign using Email Message Designer and RPL. You developed HTML and RPL code.
What are the next steps to create a campaign using the code as a base for the campaign in Responsys?

Navigate to Campaign > Create Mobile SMS Campaign. Enterthe campaign name and information.
Then, paste the code into EMD and validate.

Navigate to Campaign > Create Classic Email Campaign. Enter the campaign name and information.
Then, paste the code into EMD and validate.

Navigate to Campaign > CreateEmail Campaign. Enter the campaign name and information. Then, paste the code into EMD and validate.

Navigate to Campaign > EMD Campaign. Enter the campaign name and information. Then, paste the code into EMD and validate.

NR. 32 You need to create four versions of the same campaign with different subject lines to see which one receives the most opens and clicks. You are using EMD to create thecampaign.
How should you do this with Responsys?

Create one campaign. Then in the program, configure a winner selection element and a Send Email Campaign element for the campaign. Publish the campaign and then determine the winner in a few days.

Create four campaigns and configure the multivariate testing functionality available via the Version Test button in EMD for each campaign.

Create one campaign and configure the multivariate testing functionality available via the Version Test button in EMD of the campaign. Create a program that launches this campaign.

Create four campaigns. Then in the program, configure a winner selection element and a Send Email Campaign element for each campaign. Publish the campaign and then determine the winner ina few days.

NR. 33 You are asked to troubleshoot a dynamic campaign that is not inserting content correctly for VIP subscribers.
You learn that VIP subscribers who have spent more than $3,000 are not receiving messages with the proper promotional code associated with their status level. The amount of money a subscriber has spent is stored in the AMT_PURCHASES attribute as number data type. The set of rules is as follows:
– Rule 1: AMT_PURCHASES Greater than 100
– Rule 2: AMT_PURCHASES Greater than 1000
– Rule 3: AMT_PURCHASES Greater than 3000
Identify the solution.

Responsys can’t execute rule sets for a dynamic region without a default conditional rule that initializes the rule set to zero. You will need to create the following rule to fix this issue:1. Default Rule 0:
AMT_PURCHASES Equals 0

The rule set should be changed:1. Rule 1: AMT_PURCHASES Greater than or equal to 1002. Rule 2:
AMT_PURCHASES Greater than or equal to 10003. Rule 3: AMT_PURCHASES Greater than or equal to 3000

Responsys executes rules in sequential order, so any subscriber with more than $100 in spending will have the content inserted associated with the first rule and the rest of the rules will never be resolved.
Either the order of the rules should be reversed or the conditional logic should bechanged to use different operators.

Responsys requires that the money data type be assigned, because it doesn’t support the number data type to be used for monetary values.

NR. 34 You have a requirement to create a program that allows for the same RIID_ to have multiple enactments in it, each with a unique enactment value.
What should you use to accomplish this?

This is not possible, because RIID_ is the only variable that can be used as an identifier for a program.

This is not possible, because only one RIID_ can be in a program at a time.

Custom Event

EntryTracking Variable

Custom SQL Variable

NR. 35 Whichthree precautions should you take before deciding to delete a column from a Responsys data source?
(Wählen Sie drei aus.)

Check to make sure there are no forms referencing the column.

Ensure that there are no active campaigns referencing the column to bedeleted.

Ensure that there are no Connect jobs updating the column to be deleted.

Check to see whether the data column is being used by the customer for external analytics purposes.

NR. 36 An SSH2 key pair can be created to be used for authentication to establish a secure connection between your server and the Oracle file server.
Which key from the client key pair must you send to Responsys?

Privat

Öffentlich

Secure

Meister

NR. 37 You want touse Responsys SMS that invites recipients to click a link to a web form to register for a special event. You wish to measure clicks and form submissions (conversions).
Which four steps should you perform to make this possible? (Choose four.)

You mustpurchase Premium tracking in order to support link tracking in Responsys.

You must select a Responsys link table with the link names and URLs to be used in the SMS message.

In the SMS campaign message designer, enable conversion tracking.

You mustsupply a short URL, so you can use bit.ly to shorten links that you wish to use in your text message.

In the SMS campaign message designer, you must enable link tracking for the campaign.

NR. 38 You are working on a campaign to collect responses for 45 days.
How should you ensure that it closes 45 days after launch?

In the Campaign Workbook’s Launch Options, configure 45 days for Auto-Close after launch.

Create a calendar reminder and manually close the campaign.

In the Program Designer, configure 45 days for Auto-Close after launch.

In ManageCampaigns, select 45 days for the end element.

NR. 39 Which Insight reporting measure should you use to capture the number of clickthroughsand conversions recorded through emails on August 1, 2016?

Live Date – August 1, 2016

Interval Date = August 1, 2016 plus one day

Sent Date = August 1, 2016

Event Date = August 1, 2016

Sent Date = August 1 to August 2, 2016

Tatsächliche 1Z0-1032-21 Prüfung kürzlich aktualisierte Fragen mit kostenloser Demo [Q25-Q39]