NSE6_FWF-6.4 Dumps To Pass NSE 6 Network Security Specialist Exam in One Day (Updated 31 Questions) [Q15-Q32] : Top Exam Collection : http://blog.topexamcollection.com

NO.15 Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site

NO.16 展示品を参照。
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

NO.17 What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?

ディーエイチシーピー

Static

Broadcast

Multicast

NO.18 Which statement describes FortiPresence location map functionality?

Provides real-time insight into user movements

Provides real-time insight into user online activity

Provides real-time insight into user purchase activity

Provides real-time insight into user usage stats

NO.19 展示を参照。

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility

Areas with the signal strength weaker than -68 dB are cut out of the map

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.

20位 Which two phases are part of the process to plan a wireless design project? (Choose two.)

Project information phase

Hardware selection phase

Site survey phase

Installation phase

NO.21 Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

SQL services must be running

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

NO.22 As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Create wireless LAN specific policies

Preauthorize APs

Create a custom AP profile

Set the wireless controller country setting

NO.23 What type of design model does FortiPlanner use in wireless design project?

Architectural model

予測モデル

Analytical model

Integration model

NO.24 展示品を参照。
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

25位 When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

Social networks authentication

Software security token authentication

Short message service authentication

Hardware security token authentication

NO.26 展示品を参照。
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

NO.27 展示品を参照。
Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

Increase the transmission power of the AP radios

Enable frequency handoff on the AP to band steer clients

Reduce the number of wireless networks being broadcast by the AP

Install another AP in the reception area to improve available bandwidth

NO.28 Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

SQL services must be running

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

NO.29 As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?

Configure the APs individually by overriding the settings in Managed FortiAPs

Configure the controller for the correct country code for Germany

Clone a suitable FortiAP profile and change the county code settings on the profile

Create a new FortiAP profile and change the county code settings on the profile

30位 Which two phases are part of the process to plan a wireless design project? (Choose two.)

Project information phase

Hardware selection phase

Site survey phase

Installation phase

NO.31 You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

NO.32 Where in the controller interface can you find a wireless client’s upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

NSE6_FWF-6.4 Dumps To Pass NSE 6 Network Security Specialist Exam in One Day (Updated 31 Questions) [Q15-Q32] NSE 6 ネットワークセキュリティスペシャリスト試験に一日で合格するためのダンプスです。