[2024】SPLK-1003 by Splunk Enterprise Certified Admin 実際の無料試験プラクティステスト【Q96-Q112

[2024]  SPLK-1003 by Splunk Enterprise Certified Admin Actual Free Exam Practice Test

Free Splunk Enterprise Certified Admin SPLK-1003 Exam Question

Splunk SPLK-1003 certification exam is an excellent way for IT professionals to demonstrate their expertise in deploying and managing Splunk Enterprise. SPLK-1003 exam is designed to test the skills and knowledge required to perform the duties of a Splunk administrator. Candidates who pass the exam will be able to demonstrate their ability to install and configure Splunk, manage data inputs, create searches and reports, and troubleshoot issues that may arise in a Splunk deployment.

Exam Outline

SPLK-1003 is considered an upper-level certification test. It comes with 56 questions to be answered within 57 minutes. There’s an additional 3-minute time duration given for exam-takers to recheck the exam agreement. Henceforth, the total time allotted is 60 minutes. Notice, that you can choose to pass SPLK-1003 either at the Pearson Test Center or online, in the comfort of your home.

There are official prerequisite courses available that are suggested by the vendor to be taken prior to registering for SPLK-1003 exam and certification. These courses are Splunk Fundamentals 1 (recommended but not mandatory), Splunk Fundamentals 2, Splunk Enterprise System Administration, and Splunk Enterprise Data Administration.

新しい質問 96
Which of the following is accurate regarding the input phase?

 Breaks data into events with timestamps.

 Applies event-level transformations.

 Fine-tunes metadata.

 Performs character encoding.

説明
https://docs.splunk.com/Documentation/Splunk/latest/Deploy/Datapipeline “The data pipeline segments in depth. INPUT – In the input segment, Splunk software consumes data. It acquires the raw data stream from its source, breaks it into 64K blocks, and annotates each block with some metadata keys. The keys can also include values that are used internally, such as the character encoding of the data stream, and values that control later processing of the data, such as the index into which the events should be stored. PARSING Annotating individual events with metadata copied from the source-wide keys. Transforming event data and metadata according to regex transform rules.”

新しい質問 97
In which phase of the index time process does the license metering occur?

 input phase

 Parsing phase

 Indexing phase

 Licensing phase

説明
“When ingesting event data, the measured data volume is based on the new raw data that is placed into the indexing pipeline. Because the data is measured at the indexing pipeline, data that is filetered and dropped prior to indexing does not count against the license volume qota.”
https://docs.splunk.com/Documentation/Splunk/8.0.6/Admin/HowSplunklicensingworks

新しい質問 98
What is required when adding a native user to Splunk? (select all that apply)

 パスワード

 Username

 Full Name

 Default app

説明
According to the Splunk system admin course PDF, When adding native users, Username and Password ARE REQUIRED

新しい質問99
Which of the following are required when defining an index in indexes.conf? (Choose all that apply.)

 coldPath

 homePath

 frozenPath

 thawedPath

説明／参照
https://answers.splunk.com/answers/558653/indexesconf-and-volume-settings.html

新しい質問 100
Which setting in indexes. conf allows data retention to be controlled by time?

 maxDaysToKeep

 moveToFrozenAfter

 maxDataRetentionTime

 frozenTimePeriodlnSecs

https://docs.splunk.com/Documentation/Splunk/latest/Indexer/Setaretirementandarchivingpolicy

新しい質問101
Which of the following statements apply to directory inputs? {select all that apply)

 All discovered text files are consumed.

 Compressed files are ignored by default

 Splunk recursively traverses through the directory structure.

 When adding new log files to a monitored directory, the forwarder must be restarted to take them into account.

新しい質問 102
How often does Splunk recheck the LDAP server?

 Every 5 minutes

 Each time a user logs in

 Each time Splunk is restarted

 Varies based on LDAP_refresh setting.

https://docs.splunk.com/Documentation/Splunk/8.0.6/Security/ManageSplunkuserroleswithLDAP

新しい質問 103
Assume a file is being monitored and the data was incorrectly indexed to an exclusive index. The index is cleaned and now the data must be reindexed. What other index must be cleaned to reset the input checkpoint information for that file?

 _audit

 _checkpoint

 _introspection

 _thefishbucket

新しい質問 104
When does a warm bucket roll over to a cold bucket?

 When Splunk is restarted.

 When the maximum warm bucket age has been reached.

 When the maximum warm bucket size has been reached.

 When the maximum number of warm buckets is reached.

説明
https://docs.splunk.com/Documentation/Splunk/8.1.1/Indexer/HowSplunkstoresindexes Once further conditions are met (for example, the index reaches some maximum number of warm buckets), the indexer begins to roll the warm buckets to cold, based on their age. It always selects the oldest warm bucket to roll to cold. Buckets continue to roll to cold as they age in this manner. Cold buckets reside in a different location from hot and warm buckets. You can configure the location so that cold buckets reside on cheaper storage.

新しい質問 105
With authentication methods are natively supported within Splunk Enterprise? (Choose all that apply.)

 LDAP

 SAML

 ラディアス

 Duo Multifactor Authentication

Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/7.3.1/Security/SetupuserauthenticationwithSplunk

新しい質問 106
A user recently installed an application to index NCINX access logs. After configuring the application, they realize that no data is being ingested. Which configuration file do they need to edit to ingest the access logs to ensure it remains unaffected after upgrade?

 オプションA

 オプションB

 オプションC

 オプションD

説明
This option corresponds to the file path “$SPLUNK_HOME/etc/apps/splunk_TA_nginx/local/inputs.conf”.
This is the configuration file that the user needs to edit to ingest the NGINX access logs to ensure it remains unaffected after upgrade. This is explained in the Splunk documentation, which states:
The local directory is where you place your customized configuration files. The local directory is empty when you install Splunk Enterprise. You create it when you need to override or add to the default settings in a configuration file. The local directory is never overwritten during an upgrade.

新しい質問 107
When would the following command be used?

 To verify’ the integrity of a local index.

 To verify the integrity of a SmartStore index.

 To verify the integrity of a SmartStore bucket.

 To verify the integrity of a local bucket.

説明
To verify the integrity of a local bucket. The command ./splunk check-integrity -bucketPath [bucket path]
[-verbose] is used to verify the integrity of a local bucket by comparing the hashes stored in the l1Hashes and l2Hash files with the actual data in the bucket1. This command can help detect any tampering or corruption of the data.

新しい質問 108
An index stores its data in buckets. Which default directories does Splunk use to store buckets? (Choose all that apply.)

 bucketdb

 frozendb

 colddb

 db

新しい質問 109
Which of the following is a valid distributed search group?

 [distributedSearch:Paris] default = false servers = server1, server2

 [searchGroup:Paris] default = false servers = server1:8089, server2:8089

 [searchGroup:Paris] default = false servers = server1:9997, server2:9997

 [distributedSearch:Paris] default = false servers = server1:8089; server2:8089

https://docs.splunk.com/Documentation/Splunk/9.0.0/DistSearch/Distributedsearchgroups

新しい質問 110
Running this search in a distributed environment:

On what Splunk component does the eval command get executed?

 Heavy Forwarders

 Universal Forwarders

 Search peers

 Search heads

説明
The eval command is a distributable streaming command, which means that it can run on the search peers in a distributed environment1. The search peers are the indexers that store the data and perform the initial steps of the search processing2. The eval command calculates an expression and puts the resulting value into a search results field1. In your search, you are using the eval command to create a new field called “responsible_team” based on the values in the “account” field.

新しい質問 111
Which of the following statements accurately describes using SSL to secure the feed from a forwarder?

 It does not encrypt the certificate password.

 SSL automatically compresses the feed by default.

 It requires that the forwarder be set to compressed=true.

 It requires that the receiver be set to compression=true.

参考までに：
AboutsecuringyourSplunkconfigurationwithSSL

新しい質問 112
To set up a Network input in Splunk, what needs to be specified’?

 File path.

 Username and password

 Network protocol and port number.

 Network protocol and MAC address.

 ローディング …

Earning the SPLK-1003 certification demonstrates a high level of expertise in managing and deploying Splunk Enterprise environments. Splunk Enterprise Certified Admin certification is a valuable credential for professionals who work with Splunk Enterprise on a regular basis, including system administrators, network administrators, security professionals, and IT managers. It can also help professionals advance their careers and increase their earning potential by demonstrating their skills and expertise in this in-demand technology.

Splunk SPLK-1003 Actual Questions and Braindumps: https://www.topexamcollection.com/SPLK-1003-vce-collection.html