Section: Protection of Information Assets
설명
설명:
Forward error control involves transmitting additional redundant information with each character or frame to
facilitate detection and correction of errors, in feedback error control, only enough additional information is
transmitted so the receiver can identify that an error has occurred.
Choices B and D are both error detection methods but not error correction methods. Block sum check is an
extension of parity check wherein an additional set of parity bits is computed for a block of characters. A
cyclic redundancy check is a technique wherein a single set of check digits is generated, based on the
contents of the frame, for each frame transmitted.

Section: Protection of Information Assets
설명:
To properly protect against unauthorized disclosure of sensitive data, hard disks should be demagnetized before disposal or release.

Section: Protection of Information Assets
설명:
“With 0″”defense in depth””, more than one subsystem needs to be compromised to compromise the
security of the system and the information it holds. Subsystems should default to secure settings, and
wherever possible should be designed to “”fail secure”” rather than “”fail insecure””.

Section: Protection of Information Assets
설명:
Harming is a cyber attack intended to redirect a website’s traffic to another, bogus site. Harming can be conducted either by changing the hosts file on a victim’s computer or by exploitation of a vulnerability in DNS server software. DNS servers are computers responsible for resolving Internet names into their real IP addresses. Compromised DNS servers are sometimes referred to as “poisoned”. Harming requires unprotected access to target a computer, such as altering a customer’s home computer, rather than a corporate business server.
The term “phrasing” is a neologism based on the words “farming” and “phishing”. Phishing is a type of social-engineering attack to obtain access credentials, such as user names and passwords. In recent years, both phrasing and phishing have been used to gain information for online identity theft. Phrasing has become of major concern to businesses hosting ecommerce and online banking websites. Sophisticated measures known as anti-harming are required to protect against this serious threat. Antivirus software and spyware removal software cannot protect against harming.
For your exam you should know the information below:
Phishing is the attempt to acquire sensitive information such as usernames, passwords, and credit card details (and sometimes, indirectly, money) by masquerading as a trustworthy entity in an electronic communication. Communications purporting to be from popular social web sites, auction sites, banks, online payment processors or IT administrators are commonly used to lure unsuspecting public. Phishing emails may contain links to websites that are infected with malware. Phishing is typically carried out by email spoofing or instant messaging, and it often directs users to enter details at a fake website whose look and feel are almost identical to the legitimate one. Phishing is an example of social engineering techniques used to deceive users, and exploits the poor usability of current web security technologies. Attempts to deal with the growing number of reported phishing incidents include legislation, user training, public awareness, and technical security measures.
Spear phishing – Phishing attempts directed at specific individuals or companies have been termed spear phishing. Attackers may gather personal information about their target to increase their probability of success.
Link manipulation
Most methods of phishing use some form of technical deception designed to make a link in an email (and the spoofed website it leads to) appear to belong to the spoofed organization. Misspelled URLs or the use of sub domains are common tricks used by phishes. In the following example URL, http:// www.yourbank.example.com/, it appears as though the URL will take you to the example section of your bank website; actually this URL points to the “your bank” (i.e. phishing) section of the example website.
Another common trick is to make the displayed text for a link (the text between the are tags) suggest a reliable destination, when the link actually goes to the phishes’ site. The following example link, // en.wikipedia.org/wiki/Genuine, appears to direct the user to an article entitled “Genuine”; clicking on it will in fact take the user to the article entitled “Deception”. In the lower left hand corner of most browsers users can preview and verify where the link is going to take them. Hovering your cursor over the link for a couple of seconds may do a similar thing, but this can still be set by the phishes through the HTML tooltip tag.
Website forgery
Once a victim visits the phishing website, the deception is not over. Some phishing scams use JavaScript commands in order to alter the address bar. This is done either by placing a picture of a legitimate URL over the address bar, or by closing the original bar and opening up a new one with the legitimate URL.
An attacker can even use flaws in a trusted website’s own scripts against the victim. These types of attacks (known as cross-site scripting) are particularly problematic, because they direct the user to sign in at their bank or service’s own web page, where everything from the web address to the security certificates appears correct. In reality, the link to the website is crafted to carry out the attack, making it very difficult to spot without specialist knowledge.
The following answers are incorrect:
Smurf Attack – Occurs when mix-configured network device allow packet to be sent to all hosts on a particular network via the broadcast address of the network Traffic analysis – is the process of intercepting and examining messages in order to deduce information from patterns in communication. It can be performed even when the messages are encrypted and cannot be decrypted. In general, the greater the number of messages observed, or even intercepted and stored, the more can be inferred from the traffic. Traffic analysis can be performed in the context of military intelligence, counter-intelligence, or pattern-of-life analysis, and is a concern in computer security.
Interrupt attack- Interrupt attack occurs when a malicious action is performed by invoking the operating system to execute a particular system call.
참조:
CISA review manual 2014 Page number 323
Official ISC2 guide to CISSP CBK 3rd Edition Page number326
http://en.wikipedia.org/wiki/Phishing
http://en.wikipedia.org/wiki/Pharming

Section: Information System Operations, Maintenance and Support
설명:
For your exam you should know below information about WAN message transmission technique:
Message Switching
Message switching is a network switching technique in which data is routed in its entirety from the source node to the destination node, one hope at a time. During message routing, every intermediate switch in the network stores the whole message. If the entire network’s resources are engaged or the network becomes blocked, the message-switched network stores and delays the message until ample resources become available for effective transmission of the message.
Message Switching

Packet Switching
Refers to protocols in which messages are divided into packets before they are sent. Each packet is then transmitted individually and can even follow different routes to its destination. Once all the packets forming a message arrive at the destination, they are recompiled into the original message.
Packet Switching

Circuit Switching
Circuit switching is a methodology of implementing a telecommunications network in which two network nodes establish a dedicated communications channel (circuit) through the network before the nodes may communicate.
The circuit guarantees the full bandwidth of the channel and remains connected for the duration of the session. The circuit functions as if the nodes were physically connected similar to an electrical circuit.
The defining example of a circuit-switched network is the early analog telephone network. When a call is made from one telephone to another, switches within the telephone exchanges create a continuous wire circuit between the two telephones, for as long as the call lasts.
In circuit switching, the bit delay is constant during a connection, as opposed to packet switching, where packet queues may cause varying and potentially indefinitely long packet transfer delays. No circuit can be degraded by competing users because it is protected from use by other callers until the circuit is released and a new connection is set up. Even if no actual communication is taking place, the channel remains reserved and protected from competing users.
Circuit Switching

See a table below comparing Circuit Switched versus Packet Switched networks:
Difference between Circuit and packet switching

Virtual circuit
In telecommunications and computer networks, a virtual circuit (VC), synonymous with virtual connection and virtual channel, is a connection oriented communication service that is delivered by means of packet mode communication.
After a connection or virtual circuit is established between two nodes or application processes, a bit stream or byte stream may be delivered between the nodes; a virtual circuit protocol allows higher level protocols to avoid dealing with the division of data into segments, packets, or frames.
Virtual circuit communication resembles circuit switching, since both are connection oriented, meaning that in both cases data is delivered in correct order, and signaling overhead is required during a connection establishment phase. However, circuit switching provides constant bit rate and latency, while these may vary in a virtual circuit service due to factors such as:
varying packet queue lengths in the network nodes,
varying bit rate generated by the application,
varying load from other users sharing the same network resources by means of statistical multiplexing, etc.
The following were incorrect answers:
The other options presented are not valid choices.
참조:
CISA review manual 2014 Page number 265

Section: Protection of Information Assets

Section: The process of Auditing Information System

Section: Protection of Information Assets

Disk-to-disk (D2D) backup should not be seen as a direct replacement for backup to tape; rather, it should be viewed as part of a multitiered backup architecture that takes advantage of the best features of both tape and disk technologies. Backups todisks are not dramatically faster than backups to tapes in a balanced environment. Most often than not there is hardly a difference, since the limiting components are not tape or disk drives but the overall sustained bandwidth of the backup server’sbackplane . The advantage in terms of speed is in restoring performance, since all data are on hand and can be accessed randomly, resulting in a dramatic enhancement in throughput. This makes fast synthetic backups (making a full backup without touching the host’s data only by using the existing incremental backups) efficient and easy. Although the cost of disks has been reduced, tape-based backup can offer an overall cost advantage over disk-only solutions. Even if RAID arrays are used for D2Dstorage, a failed drive must be swapped out and the RAID set rebuilt before another disk drive fails, thus making this kind of backup more risky and not suitable as a solution of last resort. In contrast, a single tape drive failure does not produceany data loss since the data resides on the tape mediA . In a multidrive library, the loss of the use of a single tape drive has no impact on the overall level of data protection. Conversely, the loss of a disk drive in an array can put all data at ri

Section: Protection of Information Assets
설명:
Authentication is the process of verifying a user’s claimed identity. It is based on at least one of these three
factors: Something you know, Something you have, or Something you are.

A digital certificate is an electronic document that declares a public key holder is who the holder claims to be. The certificates do handle data authentication as they are used to determine who sent a particular message. A certificate authority issues the digital certificates, and distributes, generates and manages public keys. A digital signature is used to ensure integrity of the message being sent and solve the nonrepudiation issue of message origination. The registration authority would perform most of the administrative tasks of a certificate authority, i.e., registration of the users of a digital signature plus authenticating the information that is put in the digital certificate.