새 질문 91
What protocol does PPP use to identify the Network layer protocol?

새 질문 92
Which of the following is used in standard 802.11 wireless networks?

새 질문 93
Mark all packages required for PPPoE server on MikroTik RouterOS

새 질문 94
What is marked by connection-state=established matcher?

새 질문 95
DHCP server is configured on a router’s ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Possible IP pools, that can be used by this DHCP server, are:

새 질문 96
You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.

새 질문 97
Bridging loops can be avoided by enabling:

새 질문 98
Domain name system (DNS) requests can use protocol/port:

새 질문 99
Which is the default port of IP-Winbox?

새 질문 100
What menus should be used to allow certain websites to be accessed from behind a Hot-Spot interface, without client authentication

새로운 질문 101
Select which of the following are ‘Public IP addresses’:

새 질문 102
Select valid subnet masks:

새 질문 103
How many different priorities can be selected for queues in MikroTik RouterOS?

새 질문 104
Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?

새 질문 105
Action=redirect can be used in NAT chain src-nat

새 질문 106
If ARP=reply-only is configured on an interface, tcarmehis interface will

새 질문 107
If you use either Telnet or FTP, which is the highest layer you are using to transmit data?

새 질문 108
Which of the following allows a router to respond to an ARP request that is intended for a remote host?