[Apr 14, 2022] Latest 300-515 PDF Dumps & Real Tests Free Updated Today [Q23-Q39]

[Apr 14, 2022] Latest 300-515 PDF Dumps & Real Tests Free Updated Today

300-515 Dumps With 100% Verified Q&As – Pass Guarantee or Full Refund

如需了解更多信息，请阅读参考资料：

Exam Guide
Exam Contents
Study Materials
FAQs and Guide

How to book the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam

Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You have to follow these steps in order to participate for the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam:

• Step 1: Visit Pearson VUE website by clicking here
• Step 3: Login or create an account
• Step 3: Enter the exam number i.e. 300-515
• Step 3: Follow the details on the website
• Step 4: Pay for your exam via credit card or exam vouchers

新问题 23
请参阅展品。

Router 1 is a route reflector client within a service provider core PE1 cannot see VPNv4 routes received from the ASBR PE1 only has an iBGP relationship with Router 1. Which action resolves this issue?

 Activate PE1 as a neighbor under the IPv4 address family.

 Configure Router 1 as a route reflector for PE1 under the VPNv4 address family.

 Configure PE1 to have an eBGP relationship with Router 1.

 Enable BGP default ipv4-unicast

新问题 24
Refer to the exhibit:

A network engineer is implementing an OSPF configuration Based on the output, which statement is true?

 In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1.

 OSPFv3 does not run for IPv4 on FastEthemet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface Fastfc.thernet0/0

 OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6.

 IPv6 routing not enabled” is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway

新问题 25
Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model?
(选择两个）。

 The model is suited for nonredundant configurations.

 The configuration on a newly added site PE is updated automatically.

 Provider routers know the customer network topology.

 The customer specifies the exact site-to-site traffic profile.

 Routing information is exchanged between the customer router and one or a few PEs.

参考资料
http://etutorials.org/Networking/MPLS+VPN+Architectures/Part+2+MPLS-based+Virtual+Private
+Networks/Chapter+7.+Virtual+Private+Network+VPN+Implementation+Options/Overlay+and+Peer-to-peer
+VPN+Model/

新问题 26
请参阅展品。

An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in this P2MP TE network implementation?

 headend

 source

 transit

 bud

https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup- xe-3s-asr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html

新问题 27

Refer to the exhibit. Which statement about this configuration is true?

 Router 1 will accept multicast routes with a route-target of 12:1.

 192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.

 Router 1 has statically defined thresholds for data MDT.

 The MVRF must be configured on each router on the customer and service provider networks.

Section: Layer 3 VPNs

新问题 28
Refer to the exhibit:

A network engineer is implementing an OSPF configuration Based on the output, which statement is true?

 In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1.

 OSPFv3 does not run for IPv4 on FastEthemet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface Fastfc.thernet0/0

 OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6.

 IPv6 routing not enabled” is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway

新问题 29
Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model? (Choose two.)

 The model is suited for nonredundant configurations.

 The configuration on a newly added site PE is updated automatically.

 Provider routers know the customer network topology.

 The customer specifies the exact site-to-site traffic profile.

 Routing information is exchanged between the customer router and one or a few PEs.

参考资料
http://etutorials.org/Networking/MPLS+VPN+Architectures/Part+2+MPLS-based+Virtual+Private
+Networks/Chapter+7.+Virtual+Private+Network+VPN+Implementation+Options/Overlay+and+Peer-to-peer
+VPN+Model/

新问题 30
Which two frames can be configured on an Ethernet flow point? (Choose two.)

 of a specific VLAN

 with different type of service values

 with identical type of service value

 with different class of service values

 with no tags

参考资料
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-5-1/b-ce-xe-16-5-asr900/trunk-efp-support.html

新问题 31
拖放
Drag and drop the EVPN components from the left onto the correct planes on the right.
Select and Place:

Section: Layer 2 VPNs
Explanation/Reference: https://www.cisco.com/c/dam/m/en_us/network-intelligence/service-provider/digital- transformation/knowledge-network-webinars/pdfs/0420-epn-ckn.pdf slide 8

新问题 32
While troubleshooting an AToM L2VPN service, a network consultant notices that the AC Layer 2 encapsulations are different. Which action should the consultant take in order to make the MPLS L2VPN work?

 tag-rewrite on the ingress and egress PE router

 interworking IP configuration on the last PE router before label disposition

 nonrouted interworking setup to properly translate only the Layer 2 information from the AC

 interworking IP configuration on both the AC terminations on the PEs

参考资料
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-16-11/mp-l2-vpns- xe-16-11-book/l2vpn-interworking.html

新问题 33
Which kind of traffic is supported in an MVPN Extranet?

 PIM dense mode with Reverse Path Forwarding

 PIM dense mode

 PIM sparse mode

 Bidirectional PIM

Section: Layer 3 VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_mvpn/configuration/xe-16/imc-mvpn- xe-16-book/imc-mc-vpn-extranet.html

新问题 34

Drag and drop the EVC configuration items from the left onto the correct descriptions on the right.

说明

新问题 35
请参阅展品。

Which statement about this configuration is true?

 Router 1 will accept multicast routes with a route-target of 12:1.

 192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.

 Router 1 has statically defined thresholds for data MDT.

 The MVRF must be configured on each router on the customer and service provider networks.

新问题 36
请参阅展品。

What is shown in this output?

 local and outgoing abels are updated in hardware

 BGP is used between neighbors that are exchanging MPLS labels

 LDP neighbor statuses

 the labels received and advertised on PE1

新问题 37
请参阅展品。

The CE router has established a BGP peering with the PE router, and the CE will use the core infrastructure of the PE as a backbone carrier to support CSC. Which additional task can you perform to complete the configuration?

 Configure static routing on the CE router.

 Configure the address-family ipv4 labeled-unicast command under the neighbor configuration of the CE router for the PE.

 Change the rd value to 65001:65001 under the VRF section of the PE router.

 Configure OSPF on the PE router.

新问题 38
请参阅展品。

A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)

 Configure PE3 to export route-targets 100:1 and 200:2.

 Configure PE3 to import route-targets 100:1 and 200:2.

 Configure PE4 to import route-targets 101:1 and 202:2.

 Configure PE2 to export route-targets 300:3 and 400:4.

 Configure PE1 to import route-targets 300:3 and 400:4.

新问题 39
Which kind of traffic is supported in an MVPN Extranet?

 PIM dense mode with Reverse Path Forwarding

 PIM dense mode

 PIM sparse mode

 Bidirectional PIM

参考资料
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_mvpn/configuration/xe-16/imc-mvpn-xe-
16-book/imc-mc-vpn-extranet.html

 加载中 …

By finalizing training in any of the three formats, you will gain 40 CE credits that will count during recertification. Again, doing so prepares you to receive success in the exam. Some other benefits of passing through the training include the reinforcement of knowledge about fundamental concepts of MPLS VPN, including its pros as well as classification. Also, one gains insights into the configuration of optional paths in reference to traffic so that there is no network congestion. Therefore, if this is how you wish to prepare for the official exam and get ready for your upcoming job tasks, you need to enroll for official training. The specialists specifically targeted by this prep plan for exam 300-515 include network architects, network engineers, network managers, network administrators, network supervisors, network designers, and more. They will be garnering the comprehension of the techniques for executing, configuring, monitoring, and supporting solutions for SP VPN that are based on backbones for MPLS. Even as you consider registering for such a course, ensure you are aware of the prerequisites. They include having SP knowledge at the professional standard, which is equivalent to the content that you get from courses such as:

• Building Cisco SP Next-Generation Networks Part 2 (SPNGN2) v1.2.
• Deploying Cisco SP Network Routing (SPROUTE);
• Building Cisco SP Next-Generation Networks Part 1 (SPNGN1) v1.2;

2022 Valid 300-515 test answers & Cisco Exam PDF: https://www.topexamcollection.com/300-515-vce-collection.html