C-TS411-2021 Exam Questions Dumps, Selling SAP Products [Q29-Q50]

May 6, 2023 admin 0 Comments

Rate this post

C-TS411-2021 Exam Questions Dumps, Selling SAP Products

C-TS411-2021 Cert Guide PDF 100% Cover Real Exam Questions

NEW QUESTION 29
What is the significance of the Additional Data tab in class maintenance?

It only exists for class nodes. It controls the usage in BOMs.

It exists for all class types. It controls the permitted object types.

It only exists for class nodes. It controls the usage in routings.

It only exists for variant classes. It controls the use in configuration profiles.

NEW QUESTION 30
What do you have to keep in mind when working with a class hierarchy?Note: There are 2 correct Answers to this question.

You can extend the value list inherited to your subordinate class.

Characteristics values stay on their class and are not inherited.

Characteristics are inherited to all subordinate classes.

You can restrict the value list inherited to your subordinate class.

NEW QUESTION 31
What controls the material BOM item category?Note: There are 2 correct Answers to this question.

A work center is required.

A change number is required.

A material number is required.

A negative quantity is allowed.

NEW QUESTION 32
What do you have to keep in mind when creating a Product Master from scratch?Note: There are 2 correct Answers to this question.

No view selection screen becomes visible.

No organizational levels are asked.

Only files can be connected and uploaded, no document info records.

An industry sector can be selected.

NEW QUESTION 33
In a single-level configuration, you want to use a constraint so that if characteristic C1 has the value V1, then characteristic C2 is assigned the value V2.C1 and C2 are assigned to class (300)T_FCL00.What would be a correct complete constraint?

RESTRICTION: $self.C2 = ‘V2’ if $self.C1 = ‘V1’

RESTRICTION: (300)T_FCL00.C2 = ‘V2’ if (300)T_FCL00.C1 = ‘V1’

RESTRICTION: ?C2 = ‘V2’ if ?C1 = ‘V1’

RESTRICTION: ?T_FCL00.C2 = ‘V2’ if ?T_FCL00.C1 = ‘V1’

NEW QUESTION 34
What is the easiest way to check whether a model is consistent with regard to the processing mode of the configuration profile and object dependencies?

You use the Check Model function in the (VC modeling Environment PMEVC).

You use the Extras function in the material configuration (Simul./ModelingCheck Model CU50).

You use the function Inconsistent VC Models in the app Variant Configuration Overview.

You use the Check Model function in the Simulate Configuration Models app.

NEW QUESTION 35
Which configuration processes/scenarios are supported for both processing modes?

Plan./Production Order, Sales Order (SET) only

Plan./Production Order, Order BOM, Sales Order (SET)

Sales Order (SET), Order BOM only

Plan./Production Order, Order BOM only

NEW QUESTION 36
For which objects can you define a status network?Note: There are 2 correct Answers to this question.

Change number record

Change record

Document info record

Material master record

NEW QUESTION 37
You assigned a released characteristic to a class. What happens when you change the characteristic status to locked?Note: There are 2 correct Answers to this question.

This has no effect on the assigned classes or objects.

You can no longer assign this characteristic to other classes.

The characteristic is invisible in classes and objects.

You cannot change the status as the characteristic is assigned.

NEW QUESTION 38
What happens if the characteristic status is not set to Released?

The characteristic can only be changed.

The characteristic cannot be assigned to a class.

A value of this characteristic cannot be assigned in configuration.

A value of this characteristic cannot be assigned in classification of a configurable material.

NEW QUESTION 39
Which configuration process/scenario prevents the display of a BOM explosion in the sales order?Note: There are 2 correct Answers to this question.

Sales Order (SET) for both processing modes

Order BOM with processing mode AVC

Order BOM with processing mode classic and standard settings

Planned/Production Order without BOM explosion for both processing modes

NEW QUESTION 40
A procedure sets the value V2 for characteristic C2 when the value V1 is set for characteristic C1.How do you assign and define this procedure?Note: There are 3 correct Answers to this question.

Procedure to characteristic C1 using the following syntax: $self.C2 = ‘V2’ if $self.C1 = ‘V1’ (not recommended)

Procedure to characteristic C2 using the following syntax: $self.C1 = ‘V1’ if $self.C2 = ‘V2’ (not recommended)

Procedure with the following syntax to the configuration profile: $self.C2 = ‘V2’ if $self.C1 = ‘V1’ (recommended)

Procedure to the value V2 with the following syntax: $self.C1 = ‘V1’ (not recommended)

Procedure to the value V1 with the following syntax: $self.C2 = ‘V2’ (not recommended)

NEW QUESTION 41
Which scenarios are possible when you upload files to a Product Master?Note: There are 2 correct Answers to this question.

You can easily attach a Document Info Record.

You cannot attach a Document Info Record.

You can easily upload a file without selecting a Workstation Application and a Content Server.

You can easily upload a file, select a Workstation Application and a Content Server.

NEW QUESTION 42
Which of the following objects can you connect with a revision level?Note: There are 2 correct Answers to this question.

Classes

Document

Work Center

Material Master

NEW QUESTION 43
Working with the document status, what should you keep in mind?Note: There are 2 correct Answers to this question.

It can be set at object link level.

It can only be defined plant specific.

It can be defined as a status network.

It can be defined depending on document type.

NEW QUESTION 44
You use the app Find Objects in Classes. How do you find a class?Note: There are 2 correct Answers to this question.

Via hierarchy

Via change number

Via assigned characteristics

Via Class BOM

NEW QUESTION 45
You activate the check for same classification inside basic data screen of your class. Which restrictions are available?Note: There are 2 correct Answers to this question.

The classification is only checked for objects connected to several classes.

The classification is only checked when you have assigned values to all characteristics.

The classification is only checked when you have assigned values to some characteristics.

The classification is only checked for objects connected to one class.

NEW QUESTION 46
Where can you create routings?Note: There are 3 correct Answers to this question.

In the classic transaction or corresponding Fiori app for Variant Configuration Modeling Environment (PMEVC)

In Product Structure Synchronization

In the classic transaction or corresponding Fiori app for the creation of routings (CA01)

In Visual Manufacturing Planner

In the classic transaction or corresponding Fiori app for the Engineering Workbench (CEWB)

NEW QUESTION 47
What do you have to keep in mind when working with value hierarchies?Note: There are 2 correct Answers to this question.

Value nodes are values.

Only available for characteristics with CHAR or NUM format.

Value nodes are not values.

Only available for characteristics with CHAR format.

NEW QUESTION 48
What is a class node?

Special classes that are used as nodes in class hierarchies.

Special classes that are used as items in the BOM.

Special classes that are used as an operation in the routing.

Special classes that enable a cross-class search.

NEW QUESTION 49
When or why do you assign production resources and tools to an operation?

To map the equipment of the Work Center with production resources and tools.

To make additional production resources and tools available that do not belong to the equipment of the Work Center.

To provide additional components which cannot be assigned to the BOM.

To make them available for operation inspection only.

NEW QUESTION 50
You are working with VC Modeling Environment PMEVC. Complete object dependencies are created by drag & drop of one or more characteristic values into a BOM item.What can be created with this drag & drop functionality?Note: There are 2 correct Answers to this question.

Selection conditions and procedures

Local and global object dependencies

Selection conditions only

Local object dependencies only

Loading …

The exam is aimed at individuals who possess a basic understanding of SAP S/4HANA R&D Engineering and its related concepts. The exam covers a wide range of topics including the basics of SAP S/4HANA R&D Engineering, product structures, engineering change management, and project management. The exam consists of 80 multiple-choice questions and is available in several languages.

Pass C-TS411-2021 Exam – Real Questions and Answers: https://www.topexamcollection.com/C-TS411-2021-vce-collection.html