Tested & Approved NCA-6.10 Study Materials Download Free Updated 78 Questions [Q22-Q36]

December 3, 2025 admin 0 Comments

Rate this post

Tested & Approved NCA-6.10 Study Materials Download Free Updated 78 Questions

Regular Free Updates NCA-6.10 Dumps Real Exam Questions Test Engine

NEW QUESTION 22
What minimum number of clusters must be registered to Prism Central to open a support case from the UI?

The correct answer isB. 1
Nutanix Prism Central provides the ability to create and manage support casesdirectly from the UI, but this functionality requiresat least one clusterto be registered to Prism Central. The Support option becomes active onceone or more clustersare managed.
Important distinctions:
* Zero clusters(Option A): With no clusters registered, Prism Central is effectively disconnected from any environment and thus cannot associate logs or telemetry with a support case.
* One cluster(Option B): Enables access to support features, including log bundle generation and direct case submission.
* Options C and D (2 or 3 clusters) are incorrect; they arenot a requirementfor enabling support case functionality.
Prism Central UI Navigation Path:
Settings (gear icon) > Support > Create Support Case
Official Reference:
* Nutanix Prism Central Guide – Support Integration Section
* Excerpt: “To open a support case through Prism Central, ensure at least one cluster is registered.
Support features become available once a cluster is connected.”
Conclusion:Only one cluster is required to activate the support case workflow in Prism Central.

NEW QUESTION 23
What is the default admin session log out time?

5 minutes

10 minutes

15 minutes

20 minutes

NEW QUESTION 24
Which bridge does the Controller VM use by default to communicate with the AHV host it runs on?

vs0

virbro

bro

bridge0

NEW QUESTION 25
An administrator would like to configure a cluster to perform an LCM inventory automatically.
At what frequency will the inventory run by default?

Every 4 hours

Every 8 hours

Every 12 hours

Every 24 hours

The correct answer isD. Every 24 hours.
In NutanixLife Cycle Manager (LCM), when theLCM Auto Inventoryfeature is enabled, the system performsautomatic inventory scansof the cluster’s hardware and software components. By default, thisauto- inventory runs every 24 hoursto keep track of firmware, software versions, and available updates.
Clarifications:
* The frequency isnot user-configurablefrom the Prism UI.
* It ensuresaccurate detection of upgrade eligibilityand component compliance.
* The admin can alsorun an inventory manuallyat any time.
Prism UI Navigation Path:
Settings > LCM > Auto Inventory(toggle enabled)
Official Reference:
* Nutanix LCM Guide – Auto Inventory Section
* Excerpt: “When Auto Inventory is enabled, LCM automatically performs inventory every 24 hours.”

NEW QUESTION 26
An administrator needs to implement a disaster recovery plan. The company has two sites, each with its own Nutanix AHV cluster. Latency between the sites is 30ms.
Which built-in functionality in Prism Element could the administrator use to enable disaster recovery between the two clusters?

Recovery Plan

Protection Policies

Data Protection

Metro Cluster

NEW QUESTION 27
When multiple Alert policies are applied to an entity, which will take precedence?

Policy are applied to a specific entity type.

Policy are applied to all entities of an entity type.

Policy are applied to an entity type in a category.

Policy are applied to an entity type in a cluster.

When multiple alert policies are applied to an entity, Nutanix uses a hierarchical approach. Policies applied to an entity type within a categorytake precedence. For example:
* If a category (e.g., “Production”) has policies applied to entities like VMs, and the entity matches that category, the category-specific policy will override general policies.
* This prioritization allows administrators to fine-tune alert policies for specific workloads or environments.
:
Nutanix Alerts Management Guide – Policy Precedence Overview.
Nutanix University Certification Training Material.

NEW QUESTION 28
An administrator wants to enable Windows Defender Credential Guard.
What must be enabled when creating the VM?

Live Migration

UEFI

Legacy BIOS

NEW QUESTION 29
An administrator needs to enable Self Service Restore (SSR) on a Nutanix-hosted VM.
What is required for the administrator to complete this task?

A Storage Container

Nutanix Guest Tools

Prism Central

VMWare Tools

To enableSelf Service Restore (SSR)on a Nutanix-hosted VM, the VM must haveNutanix Guest Tools (NGT)installed. NGT provides integration between the VM and the Nutanix cluster, allowing features like file-level restore, application-consistent snapshots, and SSR. Administrators can use Prism Central or Element to manage SSR after enabling NGT on the VM.
* A. A Storage Container:Incorrect, as a storage container is required for storing snapshots but is not specific to SSR.
* B. Nutanix Guest Tools:Correct, as NGT is essential for enabling SSR functionality.
* C. Prism Central:Incorrect, as Prism Central helps manage SSR but is not directly required to enable it.
* D. VMWare Tools:Incorrect, as this is specific to VMware environments and not Nutanix AHV.
References:
Nutanix Guest Tools Installation Guide.
Nutanix Administration Guide: Enabling and Managing SSR.

NEW QUESTION 30
Which storage protocol is supported for a datastore when using ESXi as the hypervisor within a Nutanix cluster?

iSCSI

SMB

LVM

NFS

When using ESXi as the hypervisor in a Nutanix cluster, the supported storage protocol for a datastore isNFS (Network File System). Nutanix exposes its distributed storage to ESXi hosts using NFS for VM storage.
This protocol is simple to configure and provides high performance and reliability through Nutanix’s data services.
Other options:
* iSCSI: Not typically used for ESXi datastores but can be utilized for specific use cases like external storage connectivity.
* SMB: Not supported for ESXi datastores.
* LVM: Logical Volume Management is not used in this context.
:
Nutanix Best Practices for Running VMware vSphere on Nutanix.
VMware Compatibility with Nutanix Clusters Documentation.
Nutanix Storage Protocol Support Overview.

NEW QUESTION 31

A custom alert policy is configured for a VM named Calm_3_8_VM to generate aWarningalert ifmemory usageexceeds90%or is below30%for10 minutes.
What action can be taken to prevent this alert policy from creating multiple alerts within a 48-hour period if the 90% threshold is crossed multiple times?

Select the Auto resolve alerts checkbox and click Save.

After alert occurs, uncheck Enable Policy box for 48 hours.

Set Ignore all anomalies between to 90% and 100%.

Select highest value in Trigger alert if conditions persist for.

The correct answer isA. Select the Auto resolve alerts checkbox and click Save.
When an alert policy is configured based on astatic threshold, it will generate an alert each time the condition is met unless it has beenauto-resolvedor manually acknowledged. By enablingAuto resolve alerts, the system willautomatically clear the alertonce the metric falls back within the acceptable range. This preventsduplicate alertswhen the threshold is exceeded repeatedly within a short timeframe (e.g., multiple times over 48 hours).
Explanation of Incorrect Options:
* B (Disable policy):Not scalable or operationally sound.
* C (Ignore anomalies):Applies only to behavioral anomalies, not static thresholds.
* D (Trigger duration):Increases delay before alerting but does not suppress repeated alerts.
UI Location in Image:
#”Auto resolve alerts” is visible just below “Impact Type.”
Official Reference:
* Nutanix Prism Central Guide – Alert Policies
* Excerpt: “Enable ‘Auto resolve alerts’ to ensure alerts are cleared automatically once conditions normalize, avoiding duplicate alerts.”

NEW QUESTION 32
Refer to the exhibit.

What should be first selected to run a full health check?

Scheduled

Actions

Checks

Failed

NEW QUESTION 33
What is the default admin session log out time?

5 minutes

10 minutes

15 minutes

20 minutes

The default admin session logout time in Nutanix is15 minutes. If no activity is detected within this time, the session is automatically logged out for security reasons. This timeout can be adjusted in the system settings if needed, depending on organizational requirements.
References:
Nutanix Security Best Practices Documentation.
Nutanix Administration Guide – Session Timeout Configuration.

NEW QUESTION 34
Which storage container option reduces the available storage to other containers?

Advertised Capacity

Erasure Coding

Capacity Deduplication

Reserved Capacity

NEW QUESTION 35
What is the easiest way to get a call back from Nutanix Support on an open ticket?

Send an email to the technician.

Open a new ticket with Nutanix Support.

Select Reply within the existing ticket.

Select Escalate within the existing ticket.

The correct answer isD. Select Escalate within the existing ticket.
When working with Nutanix Support, the mosteffective and structuredway to request a callback or faster response is touse the “Escalate” functionavailable in the Support Portal for the specific support case. This formally flags the case forpriority handling, prompting action such as:
* A direct call back from support.
* Assignment of a higher-tier engineer.
* Accelerated SLA response.
Clarifications:
* A. Emailing the technicianmay go unnoticed or be delayed.
* B. Opening a new ticketintroduces duplication and delays.
* C. Replying within the casedoes not prompt immediate re-evaluation unless escalation is used.
Official Reference:
* My Nutanix Support Portal Guide – Case Management
* Excerpt: “Use the ‘Escalate’ option within an open case to notify Nutanix Support that a higher level of engagement is required.”

NEW QUESTION 36
When is deduplication recommended?

Server workloads

Linked Clone VMs

Full clone VMs

Cold data

Deduplication is most effective withfull clone VMsbecause it reduces redundant data blocks stored on the cluster. Full clone VMs often contain identical OS and application files, making them ideal candidates for deduplication, which optimizes storage usage and improves efficiency.
Other options:
* Server workloads: May benefit from deduplication but not as significantly as full clone VMs.
* Linked Clone VMs: Already share base disk images, so deduplication offers limited benefits.
* Cold data: Deduplication is less effective for data that isn’t accessed frequently.
:
Nutanix Storage Optimization Best Practices Guide.
Nutanix Prism UI Documentation – Deduplication Settings.

Loading …