NO.12 Which NFPA standard or code is the BEST guide for ventilation of medical gas storage or transfilling areas?

NO.13 How can negative air pressure BEST be maintained between the construction area and the occupied area of a hospital?

NO.14 Which of the following is a key consideration of the Infection Control Risk Assessment Mitigation process when applied to a hospital renovation project?

NO.15 A medical gas storage room with a capacity for over 3,000 cubic ft. (84.95 cubic m) at standard temperature and pressure is required to have a ventilation system with which of the following criteria?

NO.16 In accordance with ASHRAE Standard 170, which of the following areas is required to have a positive pressure relationship?

NO.17 Under condition 1 of the NFPA 70, what is the MINIMUM clearance required in front of exposed live parts with nominal voltage to ground of 600V?

NO.18 If 10,000 cfm (4,740 L/s) of air is cooled from 80°F (26.7°C) to 55°F (12.8°C) at sea level, what is the sensible heat transfer rate?

NO.19

A healthcare facility is renovating a cart washing station within the Central Sterile Reprocessing (CSR) Department. Based on the diagram above, which of the following describes the proper direction of airflow between the CSR and the renovation area?
Options:

NO.20 Which of the following is the BEST location for a room thermostat in a typical patient room?

NO.21 Which of the following represents the MINIMUM distance that must separate a fresh air intake and an exhaust system outlet?

NO.22 In accordance with The Joint Commission’s Environment of Care™ requirements, as part of the emergency management plan, healthcare organizations must conduct which of the following to identify potential emergencies?

NO.23 As part of a risk management plan for minimizing Legionellosis risk, a hospital is developing program documents for preventative measures required within its potable water systems. Which of the following portions of the program documents should be referenced in the case of a known or suspected case of Legionella associated with the use of potable water from the building water system?

NO.24 Which of the following determines the number and location of the means of egress in hospitals?

NO.25 A central cooling system is designed so that the number and arrangement of cooling sources is sufficient to support the facility operation plan in case of a breakdown of any one of the cooling sources. According to ASHRAE Standard 170, this applies when the cooling load exceeds a MINIMUM of:

NO.26 Replacement of existing roof membranes, replacement of existing doors, and replacement of less than 25% of existing windows are exempt from complying with ANSI/ASHRAE/IESNA Standard 90.1-2004 in which of the following situations?

NO.27 Mechanical ventilation of indoor medical gas storage areas is required when the minimum gas volume is greater than?

NO.28 Which of the following organizations provides accreditation to healthcare organizations within the U.S. and its territories?

NO.29 When designing a hospital, which of the following is the energy standard that should be reviewed?

NO.30 The Infection Control Risk Assessment Process addresses the:

NO.31 In the patient care area of an inpatient facility, the return air system shall?

NO.32 Airborne Infection Isolation Rooms are intended to prevent the spread of diseases such as: