NEW 2022 Certification Sample Questions NSE6_FWF-6.4 Dumps & Practice Exam [Q17-Q39]

Dezember 25, 2022 admin 0 Kommentare

4/5 - (1 Abstimmung)

NEW 2022 Certification Sample Questions NSE6_FWF-6.4 Dumps & Practice Exam

NSE6_FWF-6.4 Deluxe Study Guide with Online Test Engine

NEUE FRAGE 17
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

SQL services must be running

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

NEUE FRAGE 18
Which statement describes FortiPresence location map functionality?

Provides real-time insight into user movements

Provides real-time insight into user online activity

Provides real-time insight into user purchase activity

Provides real-time insight into user usage stats

NEUE FRAGE 19
Siehe dazu die Exponate.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

NEUE FRAGE 20
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?

Security Fabric

SSH

HTTPS

FortiTelemetry

NEUE FRAGE 21
Siehe dazu die Abbildung.

What does the asterisk (*) symbol beside the channel mean?

Indicates channels that can be used only when Radio Resource Provisioning is enabled

Indicates channels that cannot be used because of regulatory channel restrictions

Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)

Indicates channels that are subject to dynamic frequency selection (DFS) regulations

NEUE FRAGE 22
Which two statements about background rogue scanning are correct? (Choose two.)

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band

NEUE FRAGE 23
Siehe dazu die Exponate.
Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

Increase the transmission power of the AP radios

Enable frequency handoff on the AP to band steer clients

Reduce the number of wireless networks being broadcast by the AP

Install another AP in the reception area to improve available bandwidth

NEUE FRAGE 24
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

81 Tunnel-Private-Group-ID

65 Tunnel-Medium-Type

83 Tunnel-Preference

58 Egress-VLAN-Name

64 Tunnel-Type

The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.

NEUE FRAGE 25
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

According to Fortinet training: “When using DARRP, the AP selects the best channel available to use based on the scan results of BSSID/receive signal strength (RSSI) to AC” and “To set the running time for DARRP optimization, use the following CLI command within the wireless controller setting: set darrp-optimize {integer}. Note that DARRP doesn’t do continuous spectrum analysis…”

NEUE FRAGE 26
Which factor is the best indicator of wireless client connection quality?

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

NEUE FRAGE 27
Which statement describes FortiPresence location map functionality?

Provides real-time insight into user movements

Provides real-time insight into user online activity

Provides real-time insight into user purchase activity

Provides real-time insight into user usage stats

This geographical data analysis provides real-time insights into user behavior.

NEUE FRAGE 28
Siehe dazu die Exponate.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

NEUE FRAGE 29
Siehe dazu die Exponate.
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

NEUE FRAGE 30
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site

NEUE FRAGE 31
How are wireless clients assigned to a dynamic VLAN configured for hash mode?

Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN

Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs

Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool

Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of

VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.

NEUE FRAGE 32
Which factor is the best indicator of wireless client connection quality?

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

SSI, or “Received Signal Strength Indicator,” is a measurement of how well your device can hear a signal from an access point or router. It’s a value that is useful for determining if you have enough signal to get a good wireless connection.

NEUE FRAGE 33
Siehe dazu die Abbildung.

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility

Areas with the signal strength weaker than -68 dB are cut out of the map

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.

NEUE FRAGE 34
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Create wireless LAN specific policies

Preauthorize APs

Create a custom AP profile

Set the wireless controller country setting

NEUE FRAGE 35
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.

Laden …

NSE6_FWF-6.4 dumps review – Professional Quiz Study Materials: https://www.topexamcollection.com/NSE6_FWF-6.4-vce-collection.html

Schreibe einen Kommentar Antworten abbrechen

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Kommentar *

Name *

E-Mail *

Website

Meinen Namen, meine E-Mail-Adresse und meine Website in diesem Browser für die nächste Kommentierung speichern.

Geben Sie den Text aus dem Bild unten ein

Beitrags-Navigation

Vorheriger BeitragVorherige

Nächster BeitragWeiter

NSE6_FWF-6.4 Practice Tests

NSE6_FWF-6.4 Dumps To Pass NSE 6 Network Security Specialist Exam in One Day (Updated 31 Questions) [Q15-Q32]
NEW 2022 Certification Sample Questions NSE6_FWF-6.4 Dumps & Practice Exam [Q17-Q39]