[Jul 25, 2026] Valid OmniStudio-Developer Test Answers Full-length Practice Certification Exams [Q60-Q78]

7월 25, 2026 관리자 0 댓글

이 게시물 평가하기

[Jul 25, 2026] Valid OmniStudio-Developer Test Answers Full-length Practice Certification Exams

Accurate & Verified 2026 New OmniStudio-Developer Answers As Experienced in the Actual Test!

Salesforce OmniStudio-Developer is a certification exam designed for Salesforce developers who want to validate their skills and knowledge in building and customizing applications using the OmniStudio platform. OmniStudio-Developer exam focuses on various aspects of the OmniStudio development process, including design, development, deployment, and maintenance of applications.

질문 60
A developer is configuring a DataRaptor Load to Savecontract data. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

AddLink toRecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

A Set Values Action in a Value field and a Remote Action in an Additional Output value field can execute a function like CONCAT or DATEDIFF by using the syntax {{function(parameters)}}. For example,
{{CONCAT(‘Hello’, ‘World’)}} or {{DATEDIFF(‘2021-01-01’, ‘2021-01-31’)}}.

질문 61
개발자는 연락처 데이터를 JSON 배열로 변환해야 합니다.

Given the input JSON shown above, what are two ways a developer could configure a DATA Raptor transform to achieve the expected Output JSON? Choose 2 answers

LIST(Contact) 수식을 사용하고 변환 탭에서 수식의 출력을 입력으로 추가합니다.

Set the Input JSON path as List(Contact) and the Output JSON Path as Contact.

Set the Input JSON Path as Contact the out JSON Path as Contact and the output Data type as List.

입력 JSON 경로를 연락처로, 아웃풋 JSON 경로를 목록(연락처)으로 설정합니다.

DataRaptor 변환을 사용하여 데이터를 JSON, XML 또는 CSV와 같은 한 형식에서 다른 형식으로 변환할 수 있습니다. 개발자는 변환 탭에서 각 필드에 대한 입력 및 출력 경로를 지정할 수 있습니다. 개발자는 수식 탭1에서 수식을 사용하여 데이터를 조작할 수도 있습니다. 연락처 데이터를 JSON 배열로 변환하려면 개발자는 이러한 방법 중 하나를 사용할 수 있습니다:
* Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab. This will create a list of contact objects from the input JSON and output it as a JSON array.
* Set the Input JSON Path as Contact, the Output JSON Path as Contact, and the Output Data Type as List. This will output each contact object as an element of a JSON array.

질문 62
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?

The DataRaptor Action did not have the add response Ro Response JSON property set to true.

The Response cannot be previewed directly.

A Response Action was not added to the integration Procedure.

The AccountId used for the preview is invalid.

질문 63
An OmniStudio Developer is configuring an Integration Procedure that executes a Data Mapper Load Action to update a record. If the Data Mapper fails due to a validation rule, the developer needs the Integration Procedure to continue executing and send a user-friendly error message in the final response instead of stopping.
Which element should the developer use to wrap the Data Mapper Load Action?

Group element

Set Values element

Try-Catch Block

Response Action

A Try-Catch Block is the correct element because the requirement is controlled error handling. The Data Mapper Load can fail because of a validation rule, but the Integration Procedure must keep running and return a user-friendly error message rather than immediately terminating. A Group element organizes or conditionally executes steps, but it does not provide exception handling by itself. A Set Values element can prepare the friendly message after the error is caught, but it cannot catch the failure. A Response Action returns the final payload, but it should not wrap the risky operation. Salesforce Integration Procedure guidance specifically identifies Try-Catch Blocks as the mechanism for handling errors inside Integration Procedures.

질문 64
…… configure Additional input to send exactly the same data? Assume that the develop checkedSend Only Additional input.

Option D is the correct way to configure Additional input to send exactly the same data as Input Data. The Additional input should have the same key/value pairs as Input Data, and the value should be set to
{{InputData.key}} for each key. This will pass the value of Input Data for each key to Additional input.

질문 65
Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, whatis the result?

The row is deleted only in Version 3.

The row is deleted In Versions 2 and 3 but will remain in Version 1.

The row is deleted in Version 3 and Version 1.

The row is deleted in all versions

Deleting a row in Version 3 will only affect that version, not any previous or future versions. The row that contains the Code CA-SF will remain in Versions 1 and 2, as well as any versions created after Version 3. The other options are incorrect because they imply that deleting a row in one version will affect other versions as well.

질문 66
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?

BlockX.BlockYActionZ

ActionZ:BlockY:BlockX

BlockX:BlockY:ActionAZ

질문 67
아래 예시를 참조하세요. 표시된 옴니스크립트 구조 패널의 단계를 올바르게 나타내는 JSON 코드는 무엇인가요?

The JSON code correctly represents the step in the OmniScript Structure panel shown. The JSON code has the following properties:
* The type is “Step”, which indicates that this is a step element in the OmniScript.
* The label is “Step 1”, which matches the label shown in the panel.
* The name is “Step1”, which matches the name shown in the panel.
* The elements property is an array that contains one element, which is a text field.
* The text field element has the following properties:
* The type is “Text”, which indicates that this is a text field element.
* The label is “Text Field 1”, which matches the label shown in the panel.
* The name is “TextField1”, which matches the name shown in the panel.
* The value property is an empty string, which indicates that this text field has no default value.

질문 68
개발자는 다단계 접수 양식을 구축해야 합니다. 각 단계에서는 사용자가 언제든지 접수를 취소할 수 있어야 합니다. 개발자는 LWC 옴니스크립트를 사용하여 양식을 작성합니다.
개발자는 LWC 옴니스크립트 디자이너를 사용하여 모든 단계의 취소 기능을 어떻게 구현해야 하나요?

설정 탭의 취소 옵션 아래에서 취소 활성화 확인란을 선택합니다.

각 단계 안에 탐색 액션을 추가하고 컴포넌트 이름을 "취소"로 설정합니다,

각 단계 외부에 탐색 동작을 추가하고 요소 이름을 "취소"로 설정합니다,

각 단계 내부에 탐색 작업을 추가하고 요소 이름을 "취소"로 설정합니다,

질문 69
A developer needs to create DataRaptor to retrieve the name of an account for a contact.
Following best practices, how should a developer configure the extraction steps?

Define an extraction step for the Contact object and set the Extract JSON Path to Contact Account.Name

Define extraction steps for the Contact and the Account objects, and set the Extract JSON Path to Contact Account.Name

Define extraction steps for the Contact and the Account objects, and set the Extract 3SON Path to Account.Name

Define an extractionstep for the Account object, and set the Extract JSON Path to AccountContact.
이름

A DataRaptor Extract can retrieve data from multiple objects using extraction steps and JSON paths.
However, if the data is from a single object, only one extraction step is needed. The Extract JSON Path can use dot notation to access related fields from that object, such as Contact.Account.Name.

질문 70
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.

How can the developer configure the FlexCard to display the case records in this way?

Enable the record Looping feature on the data table elements

Select the Repeatable Mode property on the data table elements

Enable the Repeat Records feature on the FlexCard Setup tab

Disable the Repeat Record feature on the FlexCard setup tab

The Repeatable Mode property on the data table elements allows the developer to display multiple records in a single data table. The Repeat Records feature on the FlexCard Setup tab is used to display multiple FlexCards for each record in a data source. The Record Looping feature on the data table elements is used to iterate over a list of records and perform actions on each record. The Overwrite Target for all Null input checkbox on the Account id field is used to overwrite the existing value in the target object with null if the input value is null.

질문 71
전시회를 참조하세요.

카드 레이아웃은 통합 프로시저를 데이터 소스로 사용합니다. 카드가 레이아웃 데이터 소스를 사용합니다.
이 카드 레이아웃을 지원하고 모범 사례를 따르는 JSON 데이터 구조는 무엇인가요?

The JSON data structure in option C supports the card layout and follows best practices. It has a list of objects, each representing a product, with the properties “ProductCode”, “ProductName”, “ProductDescription”, and
“ProductPrice”. These properties match the fields in the card layout. The JSON data structure also follows the naming convention of using camel case for property names. The JSON data structures in options A and B do not match the fields in the card layout and do not follow the naming convention.

질문 72
A developer configures a FlexCard with a Data Mapper data source that uses the params.id as an input. When the developer clicks “View Data” on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display.
What could cause this error?
답변 2개 선택

The RecordId in the Test Data Source Settings is for the wrong record type.

There is no Salesforce record for the FlexCard based on the RecordId in the layout’s Test Data Source Settings.

The Data Node field for the FlexCard is empty.

The Attributes haven’t been configured to pass the data to the fields.

This scenario relates to FlexCard preview behavior and data mapping issues.
* B. There is no Salesforce record for the FlexCard based on the RecordId in the layout’s Test Data Source Settings – If the test record does not exist, the FlexCard will not display any data during preview. This is a common setup mistake.
* C. The Data Node field for the FlexCard is empty – The Data Node field must be set correctly to match the JSON node where the expected data resides. If it is empty or incorrect, the FlexCard won’t bind data to UI elements.
Incorrect Options:
* A. Even if the RecordId is from a different record type, as long as the data structure aligns, it would still render; it’s not a definitive reason for the card failing to display.
* D. Attributes are not required to display field values directly; they are used for passing data between cards or from context, not for direct field rendering.
:
Salesforce OmniStudio # FlexCard Data Source Setup & Troubleshooting

질문 73
Refer to the exhibit below. A developer has configured an Integration Procedure element with SEND
/RESPONSE TRANSFORMATIONS as shown.
Alternatively, how could the developer configure Additional Input tosend exactly the same data? Assume that the developer checked Send Only Additional Input.

The Additional Input property allows the developer to specify additional input parameters to be sent to the Integration Procedure element. The input parameters can be specified as a JSON object or as a list of key- value pairs. If the developer checked Send Only Additional Input, then only the input parameters specified in Additional Input are sent, and the SEND/RESPONSE TRANSFORMATIONS are ignored. Therefore, the developer needs to specify the same input parameters as in the SEND/RESPONSE TRANSFORMATIONS in Additional Input. Option C shows how to do this using a JSON object with two properties: “DBExtractAction:
Account” and “DBExtractAction:SecondaryAccount”. The values of these properties are the same as in the SEND/RESPONSE TRANSFORMATIONS.

질문 74
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement thecancel functionality for all steps using the LWC OmniScript Designer?

설정 탭의 취소 옵션 아래에서 취소 활성화 확인란을 선택합니다.

각 단계 안에 탐색 액션을 추가하고 컴포넌트 이름을 "취소"로 설정합니다,

각 단계 외부에 탐색 동작을 추가하고 요소 이름을 "취소"로 설정합니다,

Add a navigation Action inside each step and set the Element Name to ”Cancel”,

Checking the Enable Cancel checkbox in the Setup tab under Cancel Options allows the developer to enable the cancel functionality for all steps in the OmniScript. The user can cancel the OmniScript at any time by clicking the Cancel button in the top right corner of the OmniScript. Adding a navigation Action inside each step is not necessary and would clutter the OmniScript design. Setting the Component name or Element Name to ”Cancel” has no effect on enabling the cancel functionality.

질문 75
Refer to the exhibit below.

What is the reason that the fields fail to display the fetched data?

Lookup Mode is selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.

The typeHead key is not in the correct format.

Use Data JSON is Not selected in the properties of the Type Ahead Block.

질문 76
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community’s theme.
What must be developer do to configure the FlexCard for deployment in a Community?

Add the FlexCard’s API name to FlexCard Player component

Set the Target property in publish Options to Communitypage”

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ”Community”

질문 77
…… configure Additional input to send exactly the same data? Assume that the develop checkedSend Only Additional input.

질문 78
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?

It must be included in constants.

It must be a matrix lookup step.

It must be a calculation step.

It must be included m the calculation output.

로드 중 …

Salesforce Certified OmniStudio Developer credential is a valuable certification for developers who want to advance their careers in the rapidly growing Salesforce ecosystem. Salesforce Certified OmniStudio Developer certification demonstrates that the holder has the skills and knowledge required to build customized solutions using the OmniStudio platform. OmniStudio-Developer exam covers a wide range of topics, including data modeling, user interface design, data integration, and security. Developers who pass the exam can differentiate themselves in the competitive job market and demonstrate their commitment to continuous learning and improvement.

Certification Topics of OmniStudio-Developer Exam PDF Recently Updated Questions: https://www.topexamcollection.com/OmniStudio-Developer-vce-collection.html

답글 남기기 응답 취소

이메일 주소는 공개되지 않습니다. 필수 필드는 *로 표시됩니다

댓글 *

이름 *

이메일 *

웹사이트

다음 번 댓글 작성을 위해 이 브라우저에 이름, 이메일, 그리고 웹사이트를 저장합니다.

아래 이미지에서 텍스트를 입력합니다.

글 내비게이션

이전 게시물이전 게시물

다음 포스트다음

OmniStudio-Developer Practice Tests